2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K Datasheet NPN 150mA 50V Muting Transistors lOutline Parameter Value VCEO IC 50V 150mA VMT3 EMT3 Collector Collector Base Base Emitter Emitter 2SD2707 (SC-105AA) lFeatures 1) High DC current gain. hFE =2700 (Max.) UMT3 2SD2654 SOT-416 (SC-75A) SMT3 Collector Collector Base Base 2) High emitter-base voltage. VEBO is Min. 12V 3) Low VCE(sat) VCE(sat)=0.3V(Max.) (IC/IB=50mA/5mA) Emitter Emitter 2SD2351 SOT-323 (SC-70) 2SD2226K SOT-346 (SC-59) 4) Lead Free/RoHS Compliant. lInner circuit Collector lApplications Muting circuit Base Emitter lPackaging specifications hFE Package Package size (mm) 2SD2707 V VMT3 1212 T2L 180 8 8,000 BJx*1 2SD2654 VW EMT3 1616 TL 180 8 3,000 BJx 2SD2351 VW UMT3 2021 T106 180 8 3,000 BJx*1 2SD2226K VW SMT3 2928 T146 180 8 3,000 BJx Part No. Taping code Basic Reel size Tape width ordering (mm) (mm) unit (pcs) Marking *1 *1 *1 x : hFE rank www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 1/10 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lAbsolute maximum ratings (Ta = 25C) Parameter Symbol Values Unit Collector-base voltage VCBO 60 V Collector-emitter voltage VCEO 50 V Emitter-base voltage VEBO 12 V IC 150 mA 200 mA 200 mW 150 mW Tj 150 C Tstg -55 to +150 C Collector current ICP 2SD2226K,2SD2351 Power dissipation 2SD2351,2SD2707 Junction temperature Range of storage temperature *1 PD *2 lElectrical characteristics (Ta = 25C) Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Symbol Conditions Min. Typ. Max. Unit BVCEO IC = 1mA 50 - - V BVCBO IC = 10mA 60 - - V BVEBO IE = 10mA 12 - - V Collector cut-off current ICBO VCB = 50V - - 0.3 mA Emitter cut-off current IEBO VEB = 12V - - 0.3 mA VCE(sat) IC = 50mA, IB = 5mA - - 0.3 V hFE VCE = 5V, IC = 1mA 820 - 2700 - Transition frequency fT VCE = 5V, IE = -10mA f=100MHZ - 250 - MHz Output capacitance Cob VCB = 5V, IE = 0mA f = 1MHz - 3.5 - pF Collector-emitter saturation voltage DC current gain *1 PW=10ms Single pulse. *2 Each terminal mounted on a reference footprint lhFE rank categories Rank hFE V 820 to 1800 www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. W 1200 to 2700 2/10 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lElectrical characteristic curves(Ta = 25C) Fig.2 Typical Output Characteristics COLLECTOR CURRENT : IC [mA] COLLECTOR CURRENT : IC [mA] Fig.1 Ground Emitter Propagation Characteristics BASE TO EMITTER VOLTAGE : VBE [V] COLECTOR TO EMITTE VOLTAGE : VCE [V] Fig.4 DC Current Gain vs. Collector Current(II) DC CURRENT GAIN : hFE DC CURRENT GAIN : hFE Fig.3 DC Current Gain vs. Collector Current(I) COLLECTOR CURRENT : IC [mA] www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. COLLECTOR CURRENT : IC [mA] 3/10 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lElectrical characteristic curves(Ta = 25C) Fig.6 Collector-Emitter Saturation Voltage vs. Collector Current (II) COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [mV] COLLECTOR-EMITTER SATURATION VOLTAGE : VCE(sat) [mV] Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current (I) COLLECTOR CURRENT : IC [mA] COLLECTOR CURRENT : IC [mA] Fig.8 Gain Bandwidth Product vs. Emitter Current TRANSITION FREQUENCY : fT [MHz] BASE-EMITTER SATURATION VOLTAGE : VBE(sat) [mV] Fig.7 Base-Emitter Saturation Voltage vs. Collector Current EMITTER CURRENT :IE [mA] COLLECTOR CURRENT : IC [mA] www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 4/10 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K Fig.9 Emitter input capacitance vs. Emitter-Base Voltage Collector output capacitance vs. Collector-Base Voltage Fig.10 ON-state resistance vs. base current characteristics 100 Ta=25C f=1MHz IC=0A IE=0A ON-STATE RESISTANCE : Ron [W] COLLECTOR OUTPUT CAPACITANCE : Cob [pF] EMITTER INPUT CAPACITANCE : Cib [pF] lElectrical characteristic curves(Ta = 25C) Cib 10 Cob 1 0.1 1 10 100 COLLECTOR - BASE VOLTAGE : VCB [V] EMITTER - BASE VOLTAGE : VEB [V] BASE CURRENT : IB [mA] Fig.11 Safe Operating Area Fig.12 Safe Operating Area 1 1 1ms 0.1 10ms 100ms DC (Mounted on a reference land) 0.01 1ms 2SD2654 COLLECTOR CURRENT : IC [A] COLLECTOR CURRENT : IC [A] 2SD2707 Ta=25C Single non repetitive pulse 10ms 0.1 100ms DC (Mounted on a reference land) 0.01 Ta=25C Single non repetitive pulse 0.001 0.001 0.1 1 10 0.1 100 COLLECTOR TO EMITTER VOLTAGE : VCE [V] www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 5/10 1 10 100 COLLECTOR TO EMITTER VOLTAGE : VCE [V] 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lElectrical characteristic curves(Ta = 25C) Fig.14 Safe Operating Area Fig.13 Safe Operating Area 1 1 COLLECTOR CURRENT : IC [A] COLLECTOR CURRENT : IC [A] 2SD2226K 1ms 2SD2351 10ms 0.1 100ms DC (Mounted on a reference land) 0.01 Ta=25C Single non repetitive pulse 0.001 1ms 10ms 0.1 100ms DC (Mounted on a reference land) 0.01 Ta=25C Single non repetitive pulse 0.001 0.1 1 10 100 0.1 COLLECTOR TO EMITTER VOLTAGE : VCE [V] www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 6/10 1 10 100 COLLECTOR TO EMITTER VOLTAGE : VCE[ V] 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lDimensions (Unit : mm) D VMT3 c A e b Lp HE E L b1 x S A A1 l1 A e1 l1 b3 S e b2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A A1 b b1 c D E e HE L Lp x DIM b2 b3 e1 l1 MILIMETERS MIN MAX 0.45 0.55 0.00 0.10 0.17 0.27 0.27 0.37 0.08 0.18 1.10 1.30 0.70 0.90 0.40 1.10 1.30 0.10 0.30 0.20 0.40 0.10 INCHES MIN 0.018 0.000 0.007 0.011 0.003 0.043 0.028 MAX 0.022 0.004 0.011 0.015 0.007 0.051 0.035 0.02 0.043 0.004 0.008 - MILIMETERS MIN MAX 0.37 0.47 0.80 0.50 0.051 0.012 0.016 0.004 INCHES MIN - MAX 0.015 0.019 0.031 - 0.020 Dimension in mm / inches www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 7/10 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lDimensions (Unit : mm) D A EMT3 b1 c Lp L1 HE E Q e b A3 x S A A1 l1 A e1 l1 b3 S e b2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A A1 A3 b b1 c D E e HE L1 Lp Q x DIM b2 b3 e1 l1 MILIMETERS MIN MAX 0.60 0.80 0.00 0.10 0.25 0.15 0.30 0.25 0.40 0.10 0.20 1.50 1.70 0.70 0.90 0.50 1.40 1.80 0.10 0.15 0.05 0.25 0.10 INCHES MIN 0.024 0.000 MAX 0.031 0.004 0.010 0.006 0.010 0.004 0.059 0.028 0.012 0.016 0.008 0.067 0.035 0.020 0.055 0.004 0.006 0.002 - MILIMETERS MIN MAX 0.40 0.50 1.10 0.70 0.071 0.010 0.004 INCHES MIN - MAX 0.016 0.020 0.043 - 0.028 Dimension in mm / inches www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 8/10 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lDimensions (Unit : mm) D A UMT3 c e b x Lp L1 HE E Q A3 S A e1 l1 A1 A e S b2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A A1 A3 b c D E e HE L1 Lp Q x DIM b2 e1 l1 MILIMETERS MIN MAX 0.80 1.00 0.00 0.10 0.25 0.15 0.30 0.10 0.20 1.90 2.10 1.15 1.35 0.65 2.00 2.20 0.20 0.50 0.25 0.55 0.10 0.30 0.10 INCHES MIN 0.031 0.000 MAX 0.039 0.004 0.010 0.006 0.004 0.075 0.045 0.012 0.008 0.083 0.053 0.026 0.079 0.008 0.010 0.004 - MILIMETERS MIN MAX 0.50 1.55 0.65 0.087 0.020 0.022 0.012 0.004 INCHES MIN - MAX 0.020 0.061 - 0.026 Dimension in mm / inches www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 9/10 2013.05 - Rev.B Data Sheet 2SD2707 / 2SD2654 / 2SD2351 / 2SD2226K lDimensions (Unit : mm) D A SMT3 c Lp L1 E HE Q e A3 b x S A l1 A1 A e1 e S b2 Pattern of terminal position areas [Not a recommended pattern of soldering pads] DIM A A1 A3 b c D E e HE L1 Lp Q x y DIM b2 e1 l1 MILIMETERS MIN MAX 1.00 1.30 0.00 0.10 0.25 0.35 0.50 0.09 0.25 2.80 3.00 1.50 1.80 0.95 2.60 3.00 0.30 0.60 0.40 0.70 0.20 0.30 0.10 0.10 INCHES MIN 0.039 0.000 MAX 0.051 0.004 0.010 0.014 0.004 0.110 0.059 0.020 0.010 0.118 0.071 0.037 0.102 0.012 0.016 0.008 - MILIMETERS MIN MAX 0.60 2.10 0.90 0.118 0.024 0.028 0.012 0.004 0.004 INCHES MIN - MAX 0.024 0.083 - 0.035 Dimension in mm / inches www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. 10/10 2013.05 - Rev.B Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2013 ROHM Co., Ltd. All rights reserved. R1102A