https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page1/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed
in the Ex area. Current limitation at 58mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3.
Screw connection.
Your advantages
Mechanically compatible with the DIN rail connector
Various output characteristic curves compatible with standard solenoid valves
Loop-powered: the required power is supplied via the control signal on the input side.
Installation in zone 2, protection type "n" (EN 60079-15) permitted
Up to SIL 3 according to IEC61508
2-way electrical isolation
Input: 19.2VDC…30VDC
Output [Ex ia] IIB
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356160575
Weight per Piece (excluding packing) 160.000 g
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page2/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Technical data
Dimensions
Width 12.5 mm
Height 112.5 mm
Depth 113.7 mm
Ambient conditions
Ambient temperature (operation) -40 °C ... 60 °C (any mounting position, pay attention to the derating curve
in the data sheet)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Maximum altitude ≤ 2000 m
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Degree of protection IP20 (not assessed by UL)
Noise immunity EN 61000-6-2
Output data
Output characteristic curve: Output resistor 133.4 Ω (Internal resistance Ri)
Response time 20 ms
Compatible valves
Note This is an extract of possible combinations of valves and solenoid drivers.
Compatible valve ASCO Coil 302 (12 V)
ASCO Coil 302 (24 V)
Bürkert Coil AC 10 standard
Bürkert Coil AC 10 high resistance
FESTO Coil MFH-...IA-SA-EX GBXE022AIAD03
FESTO Coil (J)MFH-...BIA-SA-EX GBXE022AIAD03
Norgren Herion Coil 2050
Norgren Herion Coil 2051
Norgren Herion Coil 2052
Norgren Herion Coil 2053
Parker Coil VZ95 482160.01 EEx ia IIB T6
Power supply
Power dissipation < 1.325 W
Connection data
Connection method Screw connection
Stripping length 7 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page3/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Technical data
Connection data
Conductor cross section AWG 24 ... 14
Torque 0.5 Nm ... 0.6 Nm
General
No. of channels 1
Maximum temperature coefficient 0.01 %/K
Status display Yellow LED (switching state / status, lights up when output circuit is active)
Degree of pollution 2
Overvoltage category II
Electromagnetic compatibility Conformance with EMC directive
Interference emission EN 61000-6-4
Housing material PA 6.6-FR
Color gray
Designation Output/input
Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
Safety characteristic data
Integrity requirement IEC 61508 - Low demand
Equipment type Type A
Safety Integrity Level (SIL) 3
Safe Failure Fraction (SFF) 100 %
λSU 2.84 x 10-7 (284 FIT)
λSD 0
λDU 0
λDD 0
Probability of a hazardous failure on demand (PFDAVG)0 (1 year)
0 (5 years)
0 (10 years)
Diagnostic coverage (DC) DCS=0 %, DCD=0 %
Safety data
Input power Pinegligible
Max. internal inductance Linegligible
Max. internal capacitance Cinegligible
Max. output voltage Uo25.1 V
Max. output current Io188 mA
Max. output power Po1.18 W
Group IIB/IIIC
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page4/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Technical data
Safety data
Max. external inductivity Lo4 mH
Max. external capacitance Co0.83 µF
Additional text simple circuit
Group IIB/IIIC
Max. external inductivity Lo2 mH
Max. external capacitance Co300 nF
Additional text mixed circuit
Group IIB/IIIC
Max. external inductivity Lo1 mH
Max. external capacitance Co370 nF
Additional text mixed circuit
Group IIB/IIIC
Max. external inductivity Lo0.5 mH
Max. external capacitance Co460 nF
Additional text mixed circuit
Group IIB/IIIC
Max. external inductivity Lo0.1 mH
Max. external capacitance Co790 nF
Additional text mixed circuit
Safety-related maximum voltage Um253 VAC (125 V DC)
Standards and Regulations
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Conformance CE-compliant, additionally EN 61326
ATEX  II (1) G [Ex ia Ga] IIB/IIA
 II (1) D [Ex ia Da] IIIC
 II 3 (1)G Ex nA [ia IIB Ga] IIC T4 Gc X
IECEx [Ex ia Ga] IIB/IIA
[Ex ia Da] IIIC
Ex nA [ia IIB Ga] IIC T4 Gc
UL, USA/Canada Class I Div 2; IS for Class I, II, III Div 1
DNV GL-Temperature B
DNV GL-Humidity B
DNV GL-Vibration A
DNV GL-EMC A
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page5/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Technical data
Standards and Regulations
DNV GL-Enclosure Required protection according to the Rules shall be provided upon
installation on board
Group IIB/IIIC
IIB/IIIC
IIB/IIIC
IIB/IIIC
IIB/IIIC
Conformance/approvals
Designation CE
Identification CE-compliant
Additional text and EN61326
Designation ATEX
Identification  II (1) G [Ex ia Ga] IIB/IIA
 II (1) D [Ex ia Da] IIIC
 II 3 (1)G Ex nA [ia IIB Ga] IIC T4 Gc X
Certificate IBExU 07 ATEX 1133X
Designation IECEx
Identification [Ex ia Ga] IIB/IIA
[Ex ia Da] IIIC
Ex nA [ia IIB Ga] IIC T4 Gc
Certificate IECEx IBE 08.0002X
Designation UL, USA/Canada
Identification UL 61010 Listed
Class I, Div. 2, Groups A, B, C, D T4
Class I, Div. 2, Groups IIC, IIB, IIA T4
Associated apparatus for use in Class I, Division 1, Groups C,D
Associated apparatus for use in Class II, Div.1 Groups E,F,D
Associated apparatus for use in Class III, Division 1
Associated apparatus for use in Class I, Zone 0,1,2, Groups IIB, IIA
Certificate , C.D.-No 83104549
Designation UL, USA/Canada
Identification Class I Div 2; IS for Class I, II, III Div 1
Certificate , C.D.-No 83104549
Designation Shipbuilding approval
Certificate DNV GL TAA000020C
Designation Safety Integrity Level (SIL, IEC61508)
Identification 3
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page6/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Technical data
Conformance/approvals
Designation INMETRO
Identification [Ex ia Ga] IIB/IIA
[Ex ia Da] IIIC
Ex nA [ia IIB Ga] IIC T4 Gc
Certificate DNV 18.0115 X
Designation EACEx
Identification  [Ex ia Ga] IIC
 [Ex ia Da] IIIC
Certificate RU C-DE.AB72.B.00093/19
Temperature B
Humidity B
Vibration A
EMC A
Enclosure Required protection according to the Rules shall be provided upon
installation on board
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page7/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Block diagram
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page8/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Diagram
Dimensional drawing
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page9/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Classifications
eCl@ss
eCl@ss 10.0.1 27210120
eCl@ss 4.0 27210100
eCl@ss 4.1 27210100
eCl@ss 5.0 27210100
eCl@ss 5.1 27210100
eCl@ss 6.0 27210100
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
eCl@ss 9.0 27210120
ETIM
ETIM 4.0 EC002653
ETIM 5.0 EC002653
ETIM 6.0 EC002653
ETIM 7.0 EC002653
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008
UNSPSC 18.0 39121008
UNSPSC 19.0 39121008
UNSPSC 20.0 39121008
UNSPSC 21.0 39121008
Approvals
Approvals
Approvals
DNV GL / UL Listed / cUL Listed / Functional Safety / UL Listed / cUL Listed / DNV GL / Functional Safety
Ex Approvals
IECEx / ATEX / UL Listed / cUL Listed / INMETRO / EAC Ex / IECEx / ATEX / UL Listed / cUL Listed / EAC Ex / INMETRO
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page10/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Approvals
Approval details
DNV GL https://approvalfinder.dnvgl.com/ TAA000020C
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
Functional Safety 16/04-017
R025 V1R1
UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330267
DNV GL https://approvalfinder.dnvgl.com/ TAA000020C
Functional Safety 16/04-017
R025 V1R1
Accessories
Accessories
Device marking
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page11/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Accessories
Plastic label-UC-EMLP (11X9)-0819291
Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels:
10
Plastic label-UC-EMLP (11X9) YE-0822602
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels:
10
Plastic label-UC-EMLP (11X9) SR-0828094
Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED,
PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels:
10
Plastic label-US-EMLP (11X9)-0828789
Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 135
Plastic label-US-EMLP (11X9) YE-0828871
Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 135
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page12/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Accessories
Plastic label-US-EMLP (11X9) SR-0828872
Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, THERMOMARK
PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm,
Number of individual labels: 135
Device marker-LS-EMLP (11X9) WH-0831678
Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255
Device marker-LS-EMLP (11X9) YE-0831732
Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255
Device marker-LS-EMLP (11X9) SR-0831705
Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, mounting type:
adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255
Insulating sleeve
Insulating sleeve-MPS-IH BK-0201731
Insulating sleeve, color: black
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page13/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Accessories
Insulating sleeve-MPS-IH GY-0201728
Insulating sleeve, color: gray
Insulating sleeve-MPS-IH GN-0201702
Insulating sleeve, color: green
Insulating sleeve-MPS-IH YE-0201692
Insulating sleeve, color: yellow
Insulating sleeve-MPS-IH BU-0201689
Insulating sleeve, color: blue
Insulating sleeve-MPS-IH RD-0201676
Insulating sleeve, color: red
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page14/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Accessories
Insulating sleeve-MPS-IH WH-0201663
Insulating sleeve, color: white
Labeled device marker
Plastic label-UC-EMLP (11X9) CUS-0824547
Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Plastic label-UC-EMLP (11X9) YE CUS-0824548
Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm
Plastic label-UC-EMLP (11X9) SR CUS-0828098
Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive,
lettering field size: 11 x 9 mm, Number of individual labels: 10
Module carrier
Module carrier-TC-D37SUB-ADIO16-EX-P-UNI-2924854
Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-
SUB connector, 37-pos. (1:1 connection)
https://www.phoenixcontact.com/us/products/2865515
08/25/2020Page15/15
Solenoid driver-MACX MCR-EX-SL-SD-21-60-LP-2865515
Accessories
Module carrier-TC-D37SUB-AIO16-EX-PS-UNI-2902932
Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-
SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection
Power module
Power and error message module-MACX MCR-PTB-2865625
Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN
rail connector
Power and error message module-MACX MCR-PTB-SP-2924184
Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY
DIN rail connector
Test plug terminal block
Test plugs-MPS-MT-0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com