Loose R.46 X2 CLASS (IEC 60384-14) - MKP Series Taped Fig.1 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Fig.2 Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R46 Insulated rigid leads O d 0.05 Insulated flexible leads 0.5mm2 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1 Note: R.46 series has replaced the 1.40 series and 1.47 series. For new design we suggest the use of the R.46 series. *See size table. All dimensions are in mm. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 GENERAL TECHNICAL DATA test method and performance Dielectric: polypropylene film. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Test conditions 1st Winding: non-inductive type. Temperature: Relative humidity (RH): Test duration: Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Operating temperature range: -40 to +110C Rated voltage (VR): IEC 60384-14, EN 60384-14. Capacitance range: 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc Endurance: Test conditions Temperature: Test duration: Voltage applied: 0.01F to 10F Capacitance values: E6 series (IEC 60063 Norm). 10 (6)* at 1kHz * Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: Performance 1x105 M (5x105 M )* 30000 s (150000 s )* * Typical value +25C5C 1 min 100 Vdc Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s Performance Capacitance change |C/C|: 2% Winding scheme for C0.33F for C>0.33F Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C5C 09/2008 +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M); tolerance 5% (J) available upon request Dissipation factor (DF): tg 10-4 at +25C 5C: Typical value +60C 2C 95% 2% 500 hours Performance Climatic category: 40/110/56 IEC 60068-1 electrical characteristics +40C 2C 93% 2% 56 days Test conditions 2nd Temperature: Relative humidity (RH): Test duration: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Related documents: L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 single sided metallized polypropylene film 150 R.46 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS Rated Cap. 275 Vac / 560 Vdc Std dimensions Od Max dv/dt at 390Vdc (V/ s) B H L p 0.010 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2100 - - N0 - 0.015 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2150 - - N0 - 0.022 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2220 - - N0 - 0.033 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2330 - - M1 - 0.047 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2470 - - N0 - 0.068 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 2680 - - M1 - 0.10 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - M1 M 0.010 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - 01 - 0.015 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - 01 - 0.022 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - 01 - 0.033 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - 01 - 0.047 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - 01 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - 01 - 0.10 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - M1 - 0.15 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - M2 - 0.15 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - L2 - 0.22 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - M2 - 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - L2 - 0.22 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - 02 - 0.33 F 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3330 - - N0 - 0.33 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - M1 - 0.33 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - N1 M 0.33 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - 02 - 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - 01 - 0.47 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - 02 M 0.47 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - N0 M 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - M1 - 0.56 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - N0 - 0.60 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3600 - - N0 - 0.15 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3150 - - 01 - 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - M1 - 0.33 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - N0 - 0.47 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - N0 - 0.68 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - M2 - 1.0 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - N2 M 1.0 F 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - N1 - 0.47 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - 01 - (**) ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 (up to 1F, 85C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1F, 85C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 (**)ENEC mark has replaced all the following European National marks: Table 1 P2 (mm) Fig. (No.) Pitch (mm) Ordering code (Digit 10 to 11) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK Standard packaging style Lead length (mm) 0.68 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - M1 - 1.0 F 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - M1 - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - M1 - 2.2 F 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - M2 - 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4220 - - M1 - 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - M2 - 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - M2 - 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4470 - - M1 - 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - M1 - 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - M2 M 2.2 F 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - M1 - 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - M1 - 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - M2 M 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - M1 - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - M2 - 6.8 F 24.0 44.0 41.5 37.5 1.0 100 R46 KW 4680 - - M1 - 10.0 F 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - M1 - Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) Not for new design. Not for use in series with the mains. See www.kemet.com for more information. Part Number REEL O500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads Taping style 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" and contact our Technical Service for choosing the safest solution. All dimensions are in mm E12 Series available upon request 151 09/2008 R.46 X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS Rated Cap. 275 Vac / 560 Vdc Std dimensions B H L Od p Max dv/dt at 390Vdc Part Number (**) (V/ s) 0.033 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2330 - - P0 - 0.047 F 4.0 9.0 13.0 10.0 0.6 500 R46 KF 2470 - - P0 - 0.068 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 2680 - - P0 - 0.1 F 5.0 11.0 13.0 10.0 0.6 500 R46 KF 3100 - - P1 M 0.1 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3100 - - P0 - 0.15 F 6.0 12.0 13.0 10.0 0.6 500 R46 KF 3150 - - P0 M 0.15 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3150 - - P0 - 0.22 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3220 - - P0 - 0.33 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3330 - - P0 - 0.33 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3330 - - P1 0.33 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3330 - - P2 0.47 F 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3470 - - P0 - 0.47 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3470 - - P1 M 0.47 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3470 - - P2 M 0.47 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3470 - - P3 - 0.68 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3680 - - P1 M 0.68 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - P0 - 0.82 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3820 - - P0 M 0.47 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3470 - - P1 - 0.56 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3560 - - P1 M 0.56 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3560 - - P0 - 0.68 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3680 - - P0 - 1.0 F 8.5 17.0 26.5 22.5 0.8 200 R46 KN 4100 - - P1 M 1.0 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - P0 - 1.5 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4150 - - P1 M 1.5 F 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4150 - - P0 - 2.2 F 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4220 - - P0 M 1.0 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 4100 - - P0 - 1.5 F 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4150 - - P0 - 2.2 F 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4220 - - P0 - 3.3 F 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4330 - - P0 - 4.7 F 14.0 28.0 32.0 27.5 0.8 150 R46 KR 4470 - - P1 M 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - P0 - 6.8 F 22.0 37.0 32.0 27.5 0.8 150 R46 KR 4680 - - P0 - 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - P0 - 3.3 F 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4330 - - P0 - 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - P0 - 6.8 F 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4680 - - P0 - 10.0 F 20.0 40.0 41.5 37.5 1.0 100 R46 KW 5100 - - P0 - Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 (up to 1F, 85C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1F, 85C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Not for use in series with the mains. See www.kemet.com for more information. . (**)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) REEL O500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. All dimensions are in mm E12 Series available upon request For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" and contact our Technical Service for choosing the safest solution. 09/2008 152 R.46 X2 CLASS (IEC 60384-14) - MKP Series Rated Cap. 300 Vac / 630 Vdc Std dimensions Od Max dv/dt at 390Vdc metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Part Number APPROVALS (V/ s) B H L p 0.010 F 4.0 9.0 13.0 10.0 0.6 500 R46 3F 2100 - - N0 - 0.015 F 4.0 9.0 13.0 10.0 0.6 500 R46 3F 2150 - - N0 - 0.022 F 4.0 9.0 13.0 10.0 0.6 500 R46 3F 2220 - - N0 - 0.033 F 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2330 - - M1 - 0.047 F 5.0 11.0 13.0 10.0 0.6 500 R46 3F 2470 - - N0 - 0.068 F 6.0 12.0 13.0 10.0 0.6 500 R46 3F 2680 - - M1 - (**) 0.10 F 6.0 12.0 13.0 10.0 0.6 500 R46 3F 3100 - - M1 M 0.010 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2100 - - 01 - 0.015 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2150 - - 01 - 0.022 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2220 - - 01 - 0.033 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2330 - - 01 - 0.047 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2470 - - 01 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 2680 - - 01 - 0.10 F 5.0 11.0 18.0 15.0 0.6 400 R46 3I 3100 - - M1 - 0.15 F 6.0 12.0 18.0 15.0 0.6 400 R46 3I 3150 - - M2 - 0.15 F 9.0 12.5 18.0 15.0 0.6 400 R46 3I 3150 - - L2 - 0.22 F 7.5 13.5 18.0 15.0 0.6 400 R46 3I 3220 - - M2 - 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 3I 3220 - - L2 - 0.22 F 6.0 17.5 18.0 15.0 0.6 400 R46 3I 3220 - - 02 - 0.33 F 8.5 14.5 18.0 15.0 0.6 400 R46 3I 3330 - - N0 - 0.33 F 10.0 16.0 18.0 15.0 0.8 400 R46 3I 3330 - - M1 - 0.33 F 7.5 18.5 18.0 15.0 0.8 400 R46 3I 3330 - - 02 - 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 3I 3330 - - 01 - 0.47 F 10.0 16.0 18.0 15.0 0.8 400 R46 3I 3470 - - N0 M 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3470 - - M1 - 0.56 F 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3560 - - N0 - 0.60 F 11.0 19.0 18.0 15.0 0.8 400 R46 3I 3600 - - N0 - 0.15 F 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3150 - - 01 - 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3220 - - M1 - 0.33 F 6.0 15.0 26.5 22.5 0.8 200 R46 3N 3330 - - N0 - 0.47 F 7.0 16.0 26.5 22.5 0.8 200 R46 3N 3470 - - N0 - 0.68 F 10.0 18.5 26.5 22.5 0.8 200 R46 3N 3680 - - M2 - 1.0 F 10.0 18.5 26.5 22.5 0.8 200 R46 3N 4100 - - N2 M 1.0 F 11.0 20.0 26.5 22.5 0.8 200 R46 3N 4100 - - N1 - 0.47 F 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3470 - - 01 - 0.68 F 9.0 17.0 32.0 27.5 0.8 150 R46 3R 3680 - - M1 - 1.0 F 11.0 20.0 32.0 27.5 0.8 150 R46 3R 4100 - - M1 - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46 3R 4150 - - M1 - 2.2 F 13.0 25.0 32.0 27.5 0.8 150 R46 3R 4220 - - M2 - 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R46 3R 4220 - - M1 - 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4330 - - M2 - 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 3R 4470 - - M2 - 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R46 3R 4470 - - M1 - 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4150 - - M1 - 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 3W 4220 - - M2 M UL 1414 (up to 1F, 85C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1F, 85C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 FileCQC03001008199 CQC03001008842 Not for use in series with the mains. See www.kemet.com for more information. Table 1 Standard packaging style Lead length 24.0 41.5 37.5 1.0 100 R46 3W 4220 - - M1 - 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4330 - - M1 - 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 3W 4470 - - M2 M 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46 3W 4470 - - M1 - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46 3W 4680 - - M2 - 6.8 F 24.0 44.0 41.5 37.5 1.0 100 R46 3W 4680 - - M1 - 10.0 F 30.0 45.0 41.5 37.5 1.0 100 R46 3W 5100 - - M1 - Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) 13.0 E12 Series available upon request File No.V4413 (**)ENEC mark has replaced all the following European National marks: 2.2 F All dimensions are in mm Class X2 Approved according to IEC 60384-14 According to IEC 60065 3.3 F Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) ENEC IEC 60384-14 REEL O500mm Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" and contact our Technical Service for choosing the safest solution. 153 09/2008 Loose R.46 Taped Fig.1 X2 CLASS (IEC 60384-14) - MKP metallized POLYpropylene film CAPACITOR SELF-HEALING PROPERTIES Fig.2 Typical applications: interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R46 O d 0.05 p 15 p = 22.5 0.6 or 0.8* 0.8 Not for use in series with the mains. See www.kemet.com for more information. NEW 125C *See size table. All dimensions are in mm. GENERAL TECHNICAL DATA Dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/125/56 IEC 60068-1 Operating temperature range: -40 to +125C Related documents: IEC 60384-14; EN 60384-14 Rated Cap. electrical characteristics Rated voltage (VR): Capacitance range: 275 Vac (50/60Hz) / 560 Vdc 0.01F to 1F test method and performance Endurance: Test conditions Temperature: Test duration: +125C2C 1000 h Voltage applied: 1.25 x VR +1000Vac 0.1 s/h Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Approvals (**) ENEC IEC 60384-14 Class X2 File No.CA08.00063 275 Vac / 560 Vdc Std dimensions B H L Od p Max dv/dt at 390Vdc (V/ s) 0.010 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2100 - - H1 - 0.015 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2150 - - H1 - 0.022 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2220 - - H1 - 0.033 F 5.0 11.0 13.0 10.0 0.6 500 R46 K F 2330 - - H1 - 0.047 F 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2470 - - H1 - 0.068 F 6.0 12.0 13.0 10.0 0.6 500 R46 K F 2680 - - H1 M 0.010 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2100 - - H1 - 0.015 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2150 - - H1 - 0.022 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2220 - - H1 - 0.033 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2330 - - H1 - 0.047 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2470 - - H1 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 K I 2680 - - H1 - 0.10 F 6.0 12.0 18.0 15.0 0.6 400 R46 K I 3100 - - H1 - 0.15 F 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3150 - - H2 - 0.15 F 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3150 - - H3 - 0.15 F 7.5 13.5 18.0 15.0 0.6 400 R46 K I 3150 - - H1 - 0.22 F 8.5 14.5 18.0 15.0 0.6 400 R46 K I 3220 - - H1 - 0.22 F 6.0 17.5 18.0 15.0 0.6 400 R46 K I 3220 - - H2 M 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 K I 3220 - - H3 M 0.22 F 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3220 - - H4 - 0.33 F 10.0 16.0 18.0 15.0 0.8 400 R46 K I 3330 - - H1 M 0.33 F 7.5 18.5 18.0 15.0 0.8 400 R46 K I 3330 - - H2 M 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 K I 3330 - - H3 M 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 K I 3470 - - H1 M 0.15 F 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3150 - - H1 - 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 K N 3220 - - H1 - 0.33 F 7.0 16.0 26.5 22.5 0.8 200 R46 K N 3330 - - H1 - 0.47 F 10.0 18.5 26.5 22.5 0.8 200 R46 K N 3470 - - H1 - 0.68 F 11.0 20.0 26.5 22.5 0.8 200 R46 K N 3680 - - H1 - 1.0 F 13.0 22.0 26.5 22.5 0.8 200 R46 K N 4100 - - H1 - UL 1414 (up to 1F, 85C; 250Vac) Across-the-line CSA - C22.2 No.1 (up to 1F, 85C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 300Vac available upon request E12 Series available upon request Approved according to IEC 60384-14 According to IEC 60065 File No.E97797 (**) ENEC mark has replaced all the following European National marks: 09/2008 Part Number All dimensions are in mm For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" and contact our Technical Service for choosing the safest solution. 154 R.46 S Loose X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Taped Fig.1 VERSION Fig.2 Typical applications: This special R46 release is designed for applications in series with the main . PRODUCT CODE: R46 Not for new design. Not for use in series with the mains. See www.kemet.com for more information. O d 0.05 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 *See size table. All dimensions are in mm. Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 GENERAL TECHNICAL DATA test method and performance Dielectric: polypropylene film. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Test conditions 1st Winding: non-inductive type. Temperature: +40C 2C Relative humidity (RH): 93% 2% Test duration: 56 days Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Test conditions 2nd Temperature: +60C 2C Relative humidity (RH): 95% 2% Test duration: 500 hours Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Test conditions 3rd Temperature: +40C 2C Relative humidity (RH): 93% 2% Test duration: 500 hours Voltage value: 230 Vac, 50 Hz Climatic category: 40/110/56 IEC 60068-1 Operating temperature range: -40 to +110C Related documents: IEC 60384-14, EN 60384-14. electrical characteristics Rated voltage (VR): Capacitance range: 275Vac (50/60Hz) / 560 Vdc Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. 0.022F to 10F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). tolerance 5% (J) available upon request Endurance: Test conditions Temperature: Test duration: Voltage applied: Dissipation factor (DF): tg 10-4 at +25C 5C: 15 (8)* at 1kHz * Typical value Temperature: Voltage charge time: Voltage charge: Performance 1x105 M (5x105 M )* 30000 s (150000 s )* * Typical value +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Insulation resistance: Test conditions L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Dielectric strength: +25C5C 1 min 100 Vdc no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions for C0.33F for C>0.33F Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C5C Performance Capacitance change |C/C|: 2% 155 09/2008 R.46 S VERSION X2 CLASS (IEC60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS Rated Cap. (*) 275 Vac / 560 Vdc Std dimensions B H L Od p Max dv/dt at 390Vdc Part Number (**) (V/ s) 0.010 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - S0 - 0.015 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - S0 - 0.022 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - S0 - 0.033 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - S0 - 0.047 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - S1 - 0.068 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - S0 - 0.10 F 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - S1 M 0.10 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3100 - - S0 - 0.15 F 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - S1 M 0.15 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3150 - - S0 - 0.15 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - S3 - 0.22 F 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - S1 M 0.22 F 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3220 - - S0 - 0.22 F 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - S2 - 0.22 F 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - S3 - 0.33 F 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - S1 - 0.33 F 8.5 14.5 18.0 15.0 0.8 400 R46 KI 3330 - - S3 M 0.33 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - S0 - 0.33 F 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - S2 - 0.47 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - S0 - 0.47 F 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - S1 M 0.56 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - S0 - 0.68 F 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - S0 M 0.22 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - S0 - 0.33 F 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - S1 M 0.33 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3330 - - S0 - 0.47 F 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - S1 M 0.47 F 8.5 17.0 26.5 22.5 0.8 200 R46 KN 3470 - - S0 - 0.68 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - S0 - 1.0 F 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - S2 M 1.0 F 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - S1 - 1.2 F 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4120 - - S0 - 0.47 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - S0 - 0.68 F 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - S1 - 1.0 F 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - S1 - 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - S1 - 2.2 F 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - S2 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - S2 4.7 F 18.0 33.0 32.0 27.5 0.8 150 R46 KR 1.5 F 11.0 22.0 41.5 37.5 1.0 100 2.2 F 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - S2 M 2.2 F 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - S1 - 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - S1 - 4.7 F 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - S2 M 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - S1 - 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - S2 - 10.0 F 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - S1 - ENEC IEC 60384-14 Class X2 File No.V4413 UL 1414 (up to 1F, 85C; 250Vac) Across-the-line File No.E97797 CSA - C22.2 No.1 (up to 1F, 85C; 250Vac) Across-the-line certified for Canada File No.E97797 UL 1283 (310 Vac) Electromagnetic Interference Filters File No.E85238 CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference Filters certified for Canada File No.E85238 GB/T 14472 Class X2 File CQC03001008199 CQC03001008842 Approved according to IEC 60384-14 According to IEC 60065 Not for use in series with the mains. See www.kemet.com for more information. (**)ENEC mark has replaced all the following European National marks: Table 1 Standard packaging style Lead length Taping style Ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ - REEL O500mm - REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK 4470 - - S2 - R46 KW 4150 - - S1 - Loose, short leads Loose, long leads Loose, long leads (mm) Loose, insulated rigid leads Loose, insulated flexible leads 04 +2 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Note: Ammo-pack is the preferred packaging for taped version. Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) 300Vac Available upon request E12 Series available upon request All dimensions are in mm 09/2008 Not for new design. 156 Loose R.46+R Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series Taped Fig.1 Fig.2 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Insulated rigid leads Typical applications: interference suppression and across-the-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Insulated flexible leads 0.5mm2 PRODUCT CODE: R46 O d 0.05 P= 22.5 to 27.5 p = 37.5 0.8 1 Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 22.5 27.5 37.5 B +0.2 B +0.2 B +0.3 All All All Damp heat, steady state: Test conditions 1st GENERAL TECHNICAL DATA Temperature: Relative humidity (RH): Test duration: Dielectric: polypropylene film. Performance Plates: metal layer deposited by evaporation under vacuum. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Endurance: Test conditions Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Temperature: Test duration: Voltage applied: Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Operating temperature range: -40 to +110C IEC 60384-14, EN 60384-14. electrical characteristics Capacitance range: Resistance to soldering heat: Test conditions Solder bath temperature: +260C 5C Dipping time (with heat screen):10 s 1 s 0.22F to 10F Capacitance values: E6 series (IEC 60063 Norm). Performance Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Dissipation factor (DF): tg 10-4 at +25C 5C: Typical value 10 (6)* at 1kHz * Capacitance change |C/C|: 2% APPROVALS Insulation resistance: Test conditions Temperature: Voltage charge time: Voltage charge: +25C5C 1 min 100 Vdc Performance 1x105 M (5x105 M )* 30000 s (150000 s )* for C0.33F for C>0.33F * Typical value Test voltage between terminations (on all pieces): +110C 2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Performance Climatic category: 40/110/56 IEC 60068-1 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc +40C 2C 93% 2% 56 days Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Winding: non-inductive type. Rated voltage (VR): L +0.3 L +0.3 L +0.3 test method and performance All dimensions are in mm. Related documents: H +0.1 H +0.1 H +0.1 ENEC IEC 60384-14 Class X2 UL 1283 (310Vac-105C) Electromagnetic Interference File No.E85238 Filters CSA - C22.2 No.8 (310Vac-105C) Electromagnetic Interference File No.E85238 Filters certified for Canada File No.V4413 Approved according to IEC 60384-14 According to IEC 60065. Not for use in series with the mains. See www.kemet.com for more information. 157 09/2008 R.46+R Capacitors with discharge resistor X2 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES PRODUCT CODE: R46 Not for use in series with the mains. See www.kemet.com for more information. Rated Cap. (*) 275 Vac / 560 Vdc Std dimensions B H L Od Max dv/dt at 390Vdc (V/ s) Part Number p Table 1 Standard packaging style 0.22 F 7.0 16.0 26.5 22.5 0.8 200 R46KN 3220 - - 01 - x 0.33 F 8.5 17.0 26.5 22.5 0.8 200 R46KN 3330 - - 01 - x REEL O500mm 0.8 200 R46KN 3470 - - 01 - x 0.68 F 11.0 20.0 26.5 22.5 0.8 200 R46KN 3680 - - 01 - x Loose, short leads Loose, long leads Loose, long leads 0.8 150 R46KR 3470 - - 01 - x 0.68 F 11.0 20.0 32.0 27.5 0.8 150 R46KR 3680 - - M1 - x 1.0 F 13.0 22.0 32.0 27.5 0.8 150 R46KR 4100 - - M1 - x 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R46KR 4150 - - M1 - x 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R46KR 4220 - - M1 - x 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R46KR 4330 - - M2 - x 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R46KR 4470 - - M1 - x Loose, insulated rigid leads Loose, insulated flexible leads 1.0 100 R46KW 4150 - - M1 - x 1 1.0 100 R46KW 4220 - - M1 - x 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R46KW 4330 - - M1 - x R 4 6 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R46KW 4470 - - M1 - x 6.8 F 20.0 40.0 41.5 37.5 1.0 100 R46KW 4680 - - M2 - x 10.0 F 24.0 44.0 41.5 37.5 1.0 100 R46KW 5100 - - M1 - x 300 Vac / 630 Vdc Std dimensions B H L Od Max dv/dt at 390Vdc (V/ s) Part Number p 0.22 F 7.0 16.0 26.5 22.5 0.8 200 R463N 3220 - - 01 - x 0.33 F 8.5 17.0 26.5 22.5 0.8 200 R463N 3330 - - 01 - x 0.47 F 10.0 18.5 26.5 22.5 0.8 200 R463N 3470 - - 01 - x 0.68 F 11.0 20.0 26.5 22.5 0.8 200 R463N 3680 - - 01 - x 2 3 4 5 Digit 1 to 3 Digit 4 Digit 5 Digit 6 to 9 Digit 10 to 11 Digit 12 Digit 13 Digit 14 Digit 15 0.8 150 R463R 3470 - - 01 - x 0.8 150 R463R 3680 - - M1 - x 1.0 F 13.0 22.0 32.0 27.5 0.8 150 R463R 4100 - - M1 - x 1.5 F 13.0 22.0 32.0 27.5 0.8 150 R463R 4150 - - M1 - x R code (x) 2.2 F 14.0 28.0 32.0 27.5 0.8 150 R463R 4220 - - M1 - x 470 k E 3.3 F 18.0 33.0 32.0 27.5 0.8 150 R463R 4330 - - M2 - x 680 k F 4.7 F 22.0 37.0 32.0 27.5 0.8 150 R463R 4470 - - M1 - x 1 M G 1.5 F 11.0 22.0 41.5 37.5 1.0 100 R463W 4150 - - M1 - x 1.2 M L 2.2 F 13.0 24.0 41.5 37.5 1.0 100 R463W 4220 - - M1 - x 1.5 M N 3.3 F 16.0 28.5 41.5 37.5 1.0 100 R463W 4330 - - M1 - x 1.0 100 R463W 4470 - - M1 - x 1.0 100 R463W 4680 - - M2 - x 10.0 F 24.0 44.0 41.5 37.5 1.0 100 R463W 5100 - - M1 - x Pitch (mm) 19.05 2 22.5/27.5 CK +2 04 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 6 7 8 9 10 11 12 13 14 15 - Series code. a.c. rated voltage: K = 275Vac; 3 = 300Vac Pitch: N = 22.5; R = 27.5; W = 37.5 mm Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Mechanical version and/or packaging (table 1) Identifies the dimensions and electrical characteristics. Internal use Capacitance tolerance: K=10%; M=20% Value of the discharge resistor (tolerance10%) 0.68 F 11.0 20.0 32.0 27.5 6.8 F 20.0 40.0 41.5 37.5 Fig. (No.) - 0.47 F 11.0 20.0 32.0 27.5 4.7 F 19.0 32.0 41.5 37.5 P2 (mm) The part number, comprising 15 digits, is formed as follows: 1.5 F 11.0 22.0 41.5 37.5 Rated Cap. (*) Ordering code (Digit 10 to 11) Product code system 2.2 F 13.0 24.0 41.5 37.5 Rated voltage (K=275Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) Value of discharge resistor (Table 2) Taping style (mm) 0.47 F 10.0 18.5 26.5 22.5 0.47 F 11.0 20.0 32.0 27.5 Lead length according to the following table*: Table 2 2.2 M P 3.3 M Q 4.7 M S 6.8 M T 10 M V *Other resistors are avaible upon request. Rated voltage (3=300Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) All dimensions are in mm Value of discharge resistor (Table 2) Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.