TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com 400W Transient Voltage Suppressor DEVICES - High Reliability controlled devices - Economical series for thru hole mounting - Unidirectional (A) and Bidirectional (CA) construction - Selections for 5.8 to 342 V standoff voltages (VWM) - Fast response MP4KE6.8A thru MP4KE400CA, e3 LEVELS M, MA, MX, MXL FEATURES High reliability controlled devices with wafer fabrication and assembly lot traceability 100 % surge tested devices Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes specify various screening and conformance inspection options based on MIL-PRF-19500 Refer to MicroNote 129 for more details on the screening options. Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS Compliant devices available by adding "e3" suffix 3 lot norm screening performed on Standby Current I D APPLICATIONS / BENEFITS Suppresses transients up to 400 watts @ 10/1000 s (see Figure 1) 2 Protects sensitive components such as IC's, CMOS, Bipolar, BiCMOS, ECL, DTL, T L, etc. Protection from switching transients & induced RF Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively. Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance: o Class 1: MP4KE5.0A to MP4KE91CA o Class 2: MP4KE5.0A to MP4KE47ACA o Class 3: MP4KE5.0A to MP4KE24CA o Class 4: MP4KE5.0A to MP4KE12CA Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance: o Class 1: MP4KE5.0A to MP4KE30CA o Class 2: MP4KE5.0A to MP4KE15CA DO-41 (DO-204AL) MAXIMUM RATINGS Operating and Storage Temperature: -65 C to +150 C Peak Pulse Power: 400 Watts at 10/1000 s (see Figures 1, 2 and 3 for tW, waveform and derating effects) with impulse repetition rate (duty factor) of 0.01 % or less Thermal Resistance: 50 C /W junction to leads @ 3/8 inch (10 mm) from body, or 110 C/W 2 junction to ambient when mounted on FR4 PC board with 4 mm copper pads (1 oz) and track width 1 mm, length 25 mm Steady-State Power: 2.5 Watts @ TL=25 C at 3/8 inch (10 mm) from body, or 1.13 W at TA = 25 C on FR4 PC board described for thermal resistance Forward Voltage at 25 C: 3.5 V @ 30 A with 8.3 ms half-sine wave (unidirectional only Solder temperatures: 260 C for 10 s (maximum) RF01006 Rev A, June 2010 High Reliability Product Group Page 1 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ MECHANICAL AND PACKAGING Void-free transfer molded thermosetting epoxy body meeting UL94V-0 Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily solderable per MIL-STD-750, method 2026 Body marked with part number Cathode indicated by band. No cathode band on bi-directional devices. Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL standard per EIA-296 (add "TR" suffix to part number) Weight: 0.3 gram (approximately) PACKAGE DIMENSIONS NOTE: Cathode indicated by band. All dimensions in millimeters (inches) SYMBOLS & DEFINITIONS Symbol VWM PPP VBR ID Definition Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current RF01006 Rev A, June 2010 IPP VC IBR Definition Peak Pulse Current Clamping Voltage Breakdown Current for VBR High Reliability Product Group Page 2 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ ELECTRICAL CHARACTERISTICS @ 25oC MICROSEMI PART NUMBER (Note 2) REVERSE STANDOFF VOLTAGE VWM BREAKDOWN VOLTAGE VBR @ IBR MAXIMUM CLAMPING VOLTAGE VC@ IPP MAXIMUM STANDBY CURRENT ID @ VWM PEAK PULSE CURRENT (see Fig. 2) IPP MAXIMUM TEMPERATURE COEFFICIENT of VBR V(BR) V VMIN VMAX mA V A A % / C MP4KE6.8A MP4KE7.5A MP4KE8.2A MP4KE9.1A 5.80 6.40 7.02 7.78 6.45 7.13 7.79 8.65 7.14 7.88 8.61 9.55 10 10 10 1 10.5 11.3 12.1 13.4 500 200 100 20 38 35 33 30 .057 .061 .065 .068 MP4KE10A MP4KE11A 8.55 9.40 9.50 10.5 10.5 11.6 1 1 14.5 15.6 5 2 28 26 .073 .075 MP4KE12A MP4KE13A 10.2 11.1 11.4 12.4 12.6 13.7 1 1 16.7 18.2 1 1 24 22 .078 .081 MP4KE15A MP4KE16A 12.8 13.6 14.3 15.2 15.8 16.8 1 1 21.2 22.5 1 1 19 18 .084 .086 MP4KE18A MP4KE20A 15.3 17.1 17.1 19.0 18.0 21.0 1 1 25.2 27.7 1 1 16 14.5 .088 .090 MP4KE22A MP4KE24A 18.8 20.5 20.9 22.8 23.1 25.2 1 1 30.6 33.2 1 1 13 12 .092 .094 MP4KE27A MP4KE30A 23.1 25.6 25.7 28.5 28.4 31.5 1 1 37.5 41.4 1 1 11 9.5 .096 .097 MP4KE33A MP4KE36A 28.2 30.8 31.4 34.2 34.7 37.8 1 1 45.7 49.9 1 1 9.0 8.0 .098 .099 MP4KE39A MP4KE43A 33.3 36.8 37.1 40.9 41.0 45.2 1 1 53.9 59.3 1 1 7.5 7.0 .100 .101 MP4KE47A MP4KE51A 40.2 43.6 44.7 48.5 49.4 53.6 1 1 64.8 70.1 1 1 6.2 5.7 .101 .102 MP4KE56A MP4KE62A 47.8 53.0 53.2 58.9 58.8 65.1 1 1 77.0 85.0 1 1 5.2 4.7 .103 .104 MP4KE68A MP4KE75A 58.1 64.1 64.6 71.3 71.4 78.8 1 1 92.0 103.0 1 1 4.4 3.9 .104 .105 MP4KE82A MP4KE91A 70.1 77.8 77.9 86.5 86.1 95.5 1 1 113.0 125.0 1 1 3.5 3.2 .105 .106 MP4KE100A MP4KE110A 85.5 94.0 95.0 105.0 105.0 116.0 1 1 137.0 152.0 1 1 2.9 2.6 .106 .107 MP4KE120A MP4KE130A 102.0 111.0 114.0 124.0 126.0 137.0 1 1 165.0 179.0 1 1 2.4 2.2 .107 .107 MP4KE150A MP4KE160A 128.0 136.0 143.0 152.0 158.0 168.0 1 1 207.0 219.0 1 1 1.95 1.8 .108 .108 MP4KE170A MP4KE180A 145.0 154.0 162.0 171.0 179.0 189.0 1 1 234.0 246.0 1 1 1.7 1.6 .108 .108 MP4KE200A MP4KE220A 171.0 185.0 190.0 209.0 210.0 231.0 1 1 274.0 328.0 1 1 1.5 1.0 .108 .110 MP4KE250A MP4KE300A 214.0 256.0 237.0 285.0 263.0 315.0 1 1 344.0 414.0 1 1 1.0 1.0 .110 .110 MP4KE350A MP4KE400A 300.0 342.0 333.0 380.0 368.0 420.0 1 1 482.0 548.0 1 1 1.0 1.0 .110 .110 NOTE 1: NOTE 2: Forward Voltage (Vf) @ 30 amps peak, 8.3 ms sine wave equal to 3.5 volts maximum for MP4KE6.8A TO 200A (excluding bidirectional). For bidirectional construction, indicate a CA suffix after part number, e.g. MP4KE170CA. Bidirectional capacitance is half that shown in Figure 4 at zero volts. RF01006 Rev A, June 2010 High Reliability Product Group Page 3 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ GRAPHS Test waveform parameters: tr=10 s, tp=1000 s FIGURE 1 Peak Pulse Power vs. Pulse Time Peak Pulse Power (PPP) or continuous Average Power in Percent of 25oC Rating C - Capacitance - Picofarads FIGURE 2 Pulse Waveform for Exponential Surge Lead or Ambient Temperature oC FIGURE 3 Derating Curve RF01006 Rev A, June 2010 V(BR) - Breakdown Voltage - Volts FIGURE 4 MP4KE Typical Capacitance vs. Breakdown Voltage (Unipolar) High Reliability Product Group Page 4 of 4