TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 D D D D D D D D D D Very Low Power Consumption Typical Supply Current . . . 200 A (Per Amplifier) Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Common-Mode Input Voltage Range Includes VCC+ Output Short-Circuit Protection High Input Impedance . . . JFET-Input Stage Internal Frequency Compensation Latch-Up-Free Operation High Slew Rate . . . 3.5 V/s Typ description TL061, TL061A, TL061B D, JG, P, OR PW PACKAGE (TOP VIEW) OFFSET N1 IN- IN+ VCC- 1 8 2 7 3 6 4 5 NC VCC+ OUT OFFSET N2 TL061 . . . U PACKAGE (TOP VIEW) NC OFFSET N1 IN- IN+ VCC- *1 10 2 9 3 8 4 7 5 6 NC NC VCC+ OUT OFFSET N2 TL062, TL062A, TL062B D, JG, P, OR PW PACKAGE (TOP VIEW) The JFET-input operational amplifiers of the TL06_ series are designed as low-power versions of the TL08_ series amplifiers. They feature high input impedance, wide bandwidth, high slew rate, and low input offset and input bias currents. The TL06_ series feature the same terminal assignments as the TL07_ and TL08_ series. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. 1OUT 1IN- 1IN+ VCC- 1 8 2 7 3 6 4 5 VCC+ 2OUT 2IN- 2IN+ TL062 . . . U PACKAGE (TOP VIEW) NC 1OUT 1IN- 1IN+ VCC- The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from -40C to 85C, and the M-suffix devices are characterized for operation over the full military temperature range of -55C to 125C. *1 10 2 9 3 8 4 7 5 6 NC VCC+ 2OUT 2IN- 2IN+ TL064 . . . D, J, N, PW, OR W PACKAGE TL064A, TL064B . . . D OR N PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ VCC+ 2IN+ 2IN- 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN- 4IN+ VCC- 3IN+ 3IN- 3OUT NC - No internal connection Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 TL061 . . . FK PACKAGE (TOP VIEW) 5 17 6 16 7 15 8 14 9 10 11 12 13 NC 1IN- NC 1IN+ NC NC VCC+ NC OUT NC 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 1IN- 1OUT NC 4OUT 4IN- NC 2OUT NC 2IN- NC 1IN+ NC VCC+ NC 2IN+ 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 4IN+ NC VCC- NC 3IN+ 2IN- 2OUT NC 3OUT 3IN- 3 2 1 20 19 18 NC VCC- NC 2IN+ NC 4 NC VCC- NC OFFSET N2 NC NC IN- NC IN+ NC TL064 . . . FK PACKAGE (TOP VIEW) NC 1OUT NC VCC+ NC NC OFFSET N1 NC NC NC TL062 . . . FK PACKAGE (TOP VIEW) NC - No internal connection AVAILABLE OPTIONS PACKAGE TA 0C to 70C VIOMAX AT 25C SMALL OUTLINE (D008) 15 mV 6 mV 3 mV TL061CD TL061ACD TL061BCD TL061CP TL061ACP TL061BCP TL061CPW 15 mV 6 mV 3 mV TL062CD TL062ACD TL062BCD TL062CP TL062ACP TL062BCP TL062CPW 15 mV 6 mV 3 mV SMALL OUTLINE (D014) TL064CD TL064ACD TL064BCD PLASTIC DIP (N) PLASTIC DIP (P) TSSOP (PW) TL064CN TL064ACN TL064BCN TL064CPW PACKAGE TA VIOMAX AT 25C -40C 40 C to 85C 6 mV -55C to 125C 6 mV 9 mV SMALL OUTLINE (D008) SMALL OUTLINE (D014) TL061ID TL062ID TL064ID CHIP CARRIER (FK) TL062MFK TL064MFK CERAMIC DIP (J) CERAMIC DIP (JG) PLASTIC DIP (N) PLASTIC DIP (P) TL064IN TL061IP TL062IP TL062MJG TL064MJ The D package is available taped and reeled. Add the suffix R to the device type (e.g., TL061CDR). 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 FLAT PACK (U) FLAT PACK (W) TL062MU TL064MW TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 symbol (each amplifier) IN+ + OUT - IN- OFFSET N1 OFFSET N2 Offset Null/Compensation TL061 Only schematic (each amplifier) VCC+ IN+ 50 IN- 100 C1 OFFSET N1 OFFSET N2 OUT VCC- TL061 Only C1 = 10 pF on TL061, TL062, and TL064 Component values shown are nominal. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) TL06_C TL06_AC TL06_BC TL06_I TL06_M UNIT Supply voltage, VCC+ (see Note 1) 18 18 18 V Supply voltage, VCC- (see Note 1) -18 -18 -18 V Differential input voltage, VID (see Note 2) 30 30 30 V V 15 15 15 Unlimited Unlimited Unlimited Input voltage, VI (see Notes 1 and 3) Duration of output short circuit (see Note 4) Continuous total dissipation See Dissipation Rating Table Storage temperature range, Tstg -65 to 150 -65 to 150 -65 to 150 C Case temperature for 60 seconds FK package 260 C Lead temperature 1,6 1 6 mm (1/16 inch) from case for 60 seconds J,, JG,, U,, or W package 300 C Lead temperature 1,6 1 6 mm (1/6 inch) from case for 10 seconds D, N, P, or PW package 260 C 260 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values except differential voltages are with respect to the midpoint between VCC+ and VCC-. 2. Differential voltages are at IN+ with respect to IN-. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. DISSIPATION RATING TABLE 4 PACKAGE TA 25C POWER RATING DERATING FACTOR DERATE ABOVE TA TA = 70C POWER RATING TA = 85C POWER RATING TA = 125C POWER RATING N/A D (8 pin) 680 mW 5.8 mW/C 33C 465 mW 378 mW D (14 pin) 680 mW 7.6 mW/C 60C 604 mW 490 mW N/A FK 680 mW 11.0 mW/C 88C 680 mW 680 mW 273 mW J 680 mW 11.0 mW/C 88C 680 mW 680 mW 273 mW JG 680 mW 8.4 mW/C 69C 672 mW 546 mW 210 mW N 680 mW 9.2 mW/C 76C 680 mW 597 mW N/A P 680 mW 8.0 mW/C 65C 640 mW 520 mW N/A PW (8 pin) 525 mW 4.2 mW/C 25C 336 mW N/A N/A PW (14 pin) 700 mW 5.6 mW/C 25C 448 mW N/A N/A U 675 mW 5.4 mW/C 25C 432 mW 351 mW 135 mW W 680 mW 8.0 mW/C 65C 640 mW 520 mW 200 mW POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 electrical characteristics, VCC = 15 V (unless otherwise noted) PARAMETER TL061C TL062C TL064C TEST CONDITIONS MIN VIO V IO IIO IIB TA = 25C TA = Full range TYP MAX 3 15 Input offset voltage VO = 0,, RS = 50 Temperature coefficient of input offset voltage VO = 0, RS = 50 , TA = Full range Input offset current VO = 0 TA = 25C TA = Full range 5 VO = 0 TA = 25C TA = Full range 30 I Input t bias bi currentt TL061AC TL062AC TL064AC MIN 3 20 200 5 400 30 10 11 -12 to 15 11 -12 to 15 13.5 10 13.5 Common-mode input voltage range VOM Maximum peak output voltage swing RL = 10 k, TA = 25C TA = Full range 10 RL 10 k, AVD Large-signal g g differential voltage amplification VO = 10 V,, RL 10 k TA = 25C TA = Full range 3 B1 ri Unity-gain bandwidth RL = 10 k, TA = 25C Input resistance CMRR Common-mode rejection ratio TA = 25C VIC = VICRmin, VO = 0, RS = 50 , TA = 25C kSVR Supply-voltage y g rejection j ratio (VCC/VIO) PD Total power dissipation (each amplifier) VCC = 9 V to 15 V, VO = 0 0, RS = 50 , TA = 25C VO = 0, TA = 25C, No load ICC Supply current (each amplifier) VO = 0, No load 6 10 100 pA 3 nA 200 pA 7 nA V V 10 6 4 3 6 V/mV 4 1 12 10 mV V/C 10 5 VICR MAX 7.5 10 TA = 25C TYP UNIT 1 12 10 MHz 70 86 80 86 dB 70 95 80 95 dB TA = 25C, 6 7.5 6 7.5 mW 200 250 200 250 A VO1/VO2 Crosstalk attenuation AVD = 100, TA = 25C 120 120 dB All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for TA is 0C to 70C for TL06_C, TL06_AC, and TL06_BC and -40C to 85C for TL06_I. Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in Figure 15. Pulse techniques are used to maintain the junction temperature as close to the ambient temperature as possible. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 electrical characteristics, VCC = 15 V (unless otherwise noted) PARAMETER TL061BC TL062BC TL064BC TEST CONDITIONS MIN VIO V IO IIO IIB TA = 25C TA = Full range MAX 2 3 VO = 0,, RS = 50 Temperature coefficient of input offset voltage VO = 0, RS = 50 , TA = Full range Input offset current VO = 0 TA = 25C TA = Full range 5 VO = 0 TA = 25C TA = Full range 30 Common-mode input voltage range VOM Maximum peak output voltage swing RL = 10 k, RL 10 k, TA = 25C TA = Full range AVD Large-signal g g differential voltage amplification VO = 10 V,, RL 10 k TA = 25C TA = Full range Unity-gain bandwidth RL = 10 k, Input resistance MIN TA = 25C TA = 25C TA = 25C VIC = VICRmin, VO = 0, RS = 50 , TA = 25C UNIT TYP MAX 3 6 5 9 10 VICR B1 ri TYP Input offset voltage I Input t bias bi currentt TL061I TL062I TL064I V/C 10 100 5 3 200 30 7 11 -12 to 15 11 -12 to 15 10 13.5 10 13.5 4 10 100 pA 10 nA 200 pA 20 nA V V 10 6 4 4 6 V/mV 4 1 1012 mV 1 1012 MHz CMRR Common-mode rejection ratio kSVR Supply-voltage y g rejection j ratio (VCC/VIO) VCC = 9 V to 15 V, VO = 0 0, RS = 50 , TA = 25C PD Total power dissipation (each amplifier) VO = 0, No load TA = 25C, 6 7.5 6 7.5 mW ICC Supply current (each amplifier) VO = 0, No load TA = 25C, 200 250 200 250 A 80 86 80 86 dB 80 95 80 95 dB VO1/VO2 Crosstalk attenuation AVD = 100, TA = 25C 120 120 dB All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. Full range for TA is 0C to 70C for TL06_C, TL06_AC, and TL06_BC and -40C to 85C for TL06_I. Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in Figure 15. Pulse techniques are used to maintain the junction temperature as close to the ambient temperature as possible. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 electrical characteristics, VCC = 15 V (unless otherwise noted) TL061M TL062M TEST CONDITIONS PARAMETER MIN VIO V IO IIO VO = 0,, RS = 50 Temperature coefficient of input offset voltage VO = 0, RS = 50 , TA = -55C to 125C Input offset current IIB MAX 3 6 5 VO = 0 30 TA = -55C TA = 125C UNIT TYP MAX 3 9 15 10 TA = 25C TA = -55C VO = 0 MIN 9 TA = 125C TA = 25C Input bias current TYP TA = 25C TA = -55C to 125C Input offset voltage TL064M V/C 10 100 5 100 20* 20* 20 20 200 30 mV 200 50* 50* 50 50 pA nA pA nA 11.5 -12 to 15 11.5 -12 to 15 TA = 25C TA = -55C to 125C 10 13.5 10 13.5 VO = 10 V,, RL 10 k TA = 25C TA = -55C to 125C 4 TA = 25C Input resistance RL = 10 k, TA = 25C CMRR Common-mode rejection ratio VIC= VICRmin, VO = 0, RS = 50 , TA = 25C 80 86 kSVR Supply-voltage rejection ratio (VCC/VIO) VCC= 9 V to 15 V, VO = 0, RS = 50 , TA = 25C 80 95 PD Total power dissipation (each amplifier) VO = 0, No load TA = 25C, 6 7.5 6 7.5 mW ICC Supply current (each amplifier) VO = 0, No load TA = 25C, 200 250 200 250 A VICR Common-mode input voltage range TA = 25C VOM Maximum peak output voltage swing RL = 10 k, RL 10 k, AVD Large-signal differential g g voltage amplification Unity-gain bandwidth B1 ri 10 V V 10 6 4 4 6 V/mV 4 MHz 1012 80 86 dB 80 95 dB 1012 VO1/VO2 Crosstalk attenuation AVD = 100, TA = 25C 120 120 dB * This parameter is not production tested. All characteristics are measured under open-loop conditions with zero common-mode voltage, unless otherwise specified. Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in Figure 15. Pulse techniques are used to maintain the junction temperature as close to the ambient temperature as possible. operating characteristics, VCC = 15 V, TA = 25C PARAMETER SR tr TEST CONDITIONS Slew rate at unity gain (see Note 5) Rise time Overshoot factor Vn Equivalent input noise voltage NOTE 5: Slew rate at -55C to 125C is 0.7 V/s min. VI = 10 V, CL = 100 pF,, RL = 10 k, See Figure 1 C and I suffix VI = 20 V,, CL = 100 pF, RL = 10 k,, See Figure 1 RS = 20 , f = 1 kHz POST OFFICE BOX 655303 MIN TYP 1.5 3.5 2 3.5 MAX UNIT V/s M suffix * DALLAS, TEXAS 75265 0.2 10% 42 s nV/Hz 7 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 PARAMETER MEASUREMENT INFORMATION 10 k - VI 1 k - OUT + VI OUT RL = 2 k + CL = 100 pF RL Figure 1. Unity-Gain Amplifier Figure 2. Gain-of-10 Inverting Amplifier - IN- TL061 OUT + IN+ N2 N1 100 k 1.5 k VCC- Figure 3. Input Offset-Voltage Null Circuit 8 CL = 100 pF POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 TYPICAL CHARACTERISTICS Table of Graphs FIGURE Maximum peak output voltage vs Supply voltage 4 Maximum peak output voltage vs Free-air temperature 5 Maximum peak output voltage vs Load resistance 6 Maximum peak output voltage vs Frequency 7 Differential voltage amplification vs Free-air temperature 8 Large-signal differential voltage amplification vs Frequency 9 Phase shift vs Frequency 9 Supply current vs Supply voltage 10 Supply current vs Free-air temperature 11 Total power dissipation vs Free-air temperature 12 Common-mode rejection ratio vs Free-air temperature 13 Normalized unity-gain bandwidth vs Free-air temperature 14 Normalized slew rate vs Free-air temperature 14 Normalized phase shift vs Free-air temperature 14 Input bias current vs Free-air temperature 15 Voltage-follower large-signal pulse response vs Time 16 Output voltage vs Elapsed time 17 Equivalent input noise voltage vs Frequency 18 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 TYPICAL CHARACTERISTICS MAXIMUM PEAK OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE MAXIMUM PEAK OUTPUT VOLTAGE vs SUPPLY VOLTAGE 15 VOM VOM - Maximum Peak Output Voltage - V VOM - Maximum Peak Output Voltage - V VOM 15 RL = 10 k TA = 25C See Figure 2 12.5 10 7.5 AA AA 5 12.5 10 7.5 AA AA 2.5 0 2 0 4 6 8 10 12 14 5 2.5 0 -75 16 VCC = 15 V RL = 10 k See Figure 2 -50 -25 MAXIMUM PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE VOM - Maximum Peak Output Voltage - V VOM VOM - Maximum Peak Output Voltage - V VOM 15 VCC = 15 V TA = 25C See Figure 2 10 7.5 5 2.5 0 200 400 700 1 k 75 100 125 MAXIMUM PEAK OUTPUT VOLTAGE vs FREQUENCY 15 100 50 Figure 5 Figure 4 AA AA 25 TA - Free-Air Temperature - C |VCC| - Supply Voltage - V 12.5 0 2k 4k AAAA AAAA AAAA AAAA VCC = 15 V RL = 10 k TA = 25C See Figure 2 12.5 VCC = 12 V 10 7.5 5 AA AA AA 7 k 10 k AAAAA AAAAA VCC = 5 V 2.5 0 1k RL - Load Resistance - 10 k 100 k 1M 10 M f - Frequency - Hz Figure 6 Figure 7 Data at high and low temperatures are applicable only within the specified operating free-air temperature ranges of the various devices. 10 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 TYPICAL CHARACTERISTICS DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE AVD - Differential Voltage Amplification - V/mV 10 VCC = 15 V RL = 10 k 7 4 2 1 -75 -50 -25 0 25 50 75 TA - Free-Air Temperature - C 100 125 Figure 8 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY VCC = 15 V Rext = 0 RL = 10 k TA = 25C 10 Phase Shift (right scale) 1 .1 0 45 90 AVD (left scale) .01 Phase Shift AVD - Large-Signal Differential Voltage Amplification - V/mV 100 135 180 .001 1 10 100 1k 10 k 100 k 1M 10 M f - Frequency - Hz Figure 9 Data at high and low temperatures are applicable only within the specified operating free-air temperature ranges of the various devices. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 11 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE SUPPLY CURRENT vs FREE-AIR TEMPERATURE AA AA AA 250 TA = 25C No Signal No Load 200 I CC ICC - Supply Current - A I CC ICC - Supply Current - A 250 150 100 50 200 150 AA AA AA IIIII IIIII IIIII 100 50 0 0 2 4 6 8 10 12 14 16 0 -75 VCC = 15 V No Signal No Load -50 -25 Figure 10 87 CMRR - Common-Mode Rejection Ratio - dB P PD D - Total Power Dissipation - mW 25 TL064 VCC = 15 V No Signal No Load 15 TL062 AA AA 10 TL061 5 -50 -25 0 25 50 75 100 125 ALL EXCEPT TL06_C COMMON-MODE REJECTION RATIO vs FREE-AIR TEMPERATURE 30 0 -75 25 Figure 11 TOTAL POWER DISSIPATION vs FREE-AIR TEMPERATURE 20 0 TA - Free-Air Temperature - C |VCC| - Supply Voltage - V 50 75 100 125 VCC = 15 V RL = 10 k 86 85 84 83 82 81 -75 -50 -25 0 25 50 75 100 125 TA - Free-Air Temperature - C TA - Free-Air Temperature - C Figure 12 Figure 13 Data at high and low temperatures are applicable only within the specified operating free-air temperature ranges of the various devices. 12 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 TYPICAL CHARACTERISTICS 1.03 1.3 1.2 Unity-Gain Bandwidth (left scale) 1.02 Phase Shift (right scale) 1.1 1.01 Slew Rate (left scale) 1 1 0.9 0.8 0.7 -75 0.99 VCC = 15 V RL = 10 k f = B1 for Phase Shift -50 Normalized Phase Shift Normalized Unity-Gain Bandwidth and Slew Rate NORMALIZED UNITY-GAIN BANDWIDTH, SLEW RATE, AND PHASE SHIFT vs FREE-AIR TEMPERATURE 0.98 -25 0 25 50 75 100 TA - Free-Air Temperature - C 0.97 125 Figure 14 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE vs TIME INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE AAAAA IIB IIB - Input Bias Current - nA 40 6 Input VCC = 15 V 4 Input and Output Voltages - V 100 10 4 1 AA AA 0.4 0.1 0 Output -2 VCC = 15 V RL = 10 k CL = 100 pF TA = 25C -4 0.04 0.01 -50 2 -25 0 25 50 75 100 TA - Free-Air Temperature - C 125 -6 0 Figure 15 2 4 6 t - Time - s 8 10 Figure 16 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 13 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 TYPICAL CHARACTERISTICS EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY OUTPUT VOLTAGE vs ELAPSED TIME Vn Vn - Equivalent Input Noise Voltage - nV/ Hz 24 VO - Output Voltage - mV AAAAA AAAAA AAAAA 100 28 Overshoot 20 90% 16 12 8 4 10% VCC = 15 V RL = 10 k TA = 25C 0 tr -4 0 0.2 0.4 0.6 0.8 1 t - Elapsed Time - s 1.2 1.4 AA AA VCC = 15 V RS = 20 TA = 25C 90 80 70 60 50 40 30 20 10 0 10 40 400 1 k 4 k 10 k f - Frequency - Hz Figure 18 Figure 17 14 100 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 40 k 100 k TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 APPLICATION INFORMATION Table of Application Diagrams PART NUMBER FIGURE Instrumentation amplifier TL064 19 0.5-Hz square-wave oscillator TL061 20 High-Q notch filter TL061 21 Audio-distribution amplifier TL064 22 Low-level light detector preamplifier TL061 23 AC amplifier TL061 24 Microphone preamplifier with tone control TL061 25 Instrumentation amplifier TL062 26 IC preamplifier TL062 27 APPLICATION DIAGRAM VCC+ 10 k 0.1% 10 k 0.1% - TL064 100 k + Input A VCC+ VCC- - Output TL064 100 k + VCC+ 1 M VCC+ VCC- Input B + - TL064 - 10 k 0.1% TL064 10 k 0.1% 100 k + 100 k VCC- VCC- Figure 19. Instrumentation Amplifier RF = 100 k VCC+ - Output - TL061 + CF = 3.3 F Input TL061 R1 C3 + 15 V 3.3 k VCC- 1 k -15 V f + 2p C1 3.3 k 1 RF Output R2 R3 C2 R1 = R2 = 2 x R3 = 1.5 M CF fo Figure 20. 0.5-Hz Square-Wave Oscillator POST OFFICE BOX 655303 + C2 + C32 + 110 pF + 2p R11 C1 + 1 kHz C1 9.1 k Figure 21. High-Q Notch Filter * DALLAS, TEXAS 75265 15 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 APPLICATION INFORMATION VCC+ - 1 M TL064 VCC+ Output A + - 1 F TL064 + TL064 Output B + 100 k VCC+ VCC+ - 100 k 100 F VCC+ - Input 100 k TL064 Output C + Figure 22. Audio-Distribution Amplifier 15 V 10 k 10 k 10 k + TIL601 100 pF TL061 - 10 k 10 k 5 k 10 k -15 V Figure 23. Low-Level Light Detector Preamplifier 16 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 Output TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 APPLICATION INFORMATION VCC+ 0.1 F 10 k 10 k 1 M - Output TL061 50 + N2 10 k 0.1 F N1 250 k Figure 24. AC Amplifier 10 k 0.1 F 100 k 0.06 F 0.06 F + TL061 - 1.2 M 47 k 1 k 1 F 10 k 0.002 F 100 k 50 k 2.7 k 270 100 k 0.003 F 0.001 F 10 k 100 k + 50 k 20 F 0.02 F Figure 25. Microphone Preamplifier With Tone Control IN+ + TL062 - Output 100 k 1 k 1 k 100 k IN- - TL062 + Figure 26. Instrumentation Amplifier POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 17 TL061, TL061A, TL061B, TL062, TL062A TL062B, TL064, TL064A, TL064B LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERS SLOS078G - NOVEMBER 1978 - REVISED MAY 2002 APPLICATION INFORMATION IC PREAMPLIFIER RESPONSE CHARACTERISTICS 25 AAAA AAAA AAAA Max Bass 20 VCC = 15 V TA = 25C 15 Voltage Amplification - dB Max Treble 10 5 0 -5 -10 AAAA AAAA -15 -20 -25 20 40 AAA AAA Min Treble Min Bass 100 200 400 1k 2k 4k 10 k 20 k f - Frequency - Hz 220 k 0.00375 F 0.01 F 10 k 27 k MIN 100 k Bass MAX VCC+ 100 1 F Input 100 0.003 F 0.03 F + TL062 - MIN 100 k Treble 10 k 3.3 k VCC+ MAX + TL062 - 0.03 F 0.003 F VCC- VCC- 10 k Balance 10 pF 75 F 47 k + 50 pF 10 pF 5 k Gain + 68 k 47 F Figure 27. IC Preamplifier 18 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 Output IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2002, Texas Instruments Incorporated