TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 D Outstanding Combination of dc Precision D D and AC Performance: Unity-Gain Bandwidth . . . 15 MHz Typ Vn . . . . . 3.3 nV/Hz at f = 10 Hz Typ, 2.5 nV/Hz at f = 1 kHz Typ VIO . . . . 25 V Max AVD . . . . 45 V/V Typ With RL = 2 k, 19 V/V Typ With RL = 600 Available in Standard-Pinout Small-Outline Package Output Features Saturation Recovery Circuitry Macromodels and Statistical information OFFSET N1 IN - IN + VCC - 1 8 2 7 3 6 4 5 OFFSET N2 VCC + OUT NC FK PACKAGE (TOP VIEW) NC OFFSET N1 NC OFFSET N2 NC D D, JG, OR P PACKAGE (TOP VIEW) description NC IN - NC IN + NC 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC VCC + NC OUT NC NC VCC - NC NC NC The TLE20x7 and TLE20x7A contain innovative circuit design expertise and high-quality process control techniques to produce a level of ac performance and dc precision previously unavailable in single operational amplifiers. Manufactured using Texas Instruments state-of-the-art Excalibur process, these devices allow upgrades to systems that use lower-precision devices. In the area of dc precision, the TLE20x7 and TLE20x7A offer maximum offset voltages of 100 V and 25 V, respectively, common-mode rejection ratio of 131 dB (typ), supply voltage rejection ratio of 144 dB (typ), and dc gain of 45 V/V (typ). AVAILABLE OPTIONS PACKAGED DEVICES TA 0C to 70C -40 40C to 105C 55C to 125C -55 CHIP FORM (Y) VIOmax AT 25C SMALL OUTLINE (D) CHIP CARRIER (FK) 25 V TLE2027ACD TLE2037ACD -- -- -- -- TLE2027ACP TLE2037ACP TLE2027Y TLE2037Y 100 V TLE2027CD TLE2037CD -- -- -- -- TLE2027CP TLE2037CP TLE2027Y TLE2037Y 25 V TLE2027AID TLE2037AID -- -- -- -- TLE2027AIP TLE2037AIP -- 100 V TLE2027ID TLE2037ID -- -- -- -- TLE2027IP TLE2037IP -- 25 V TLE2027AMD TLE2037AMD TLE2027AMFK TLE2037AMFK TLE2027AMJG TLE2037AMJG TLE2027AMP TLE2037AMP -- 100 V TLE2027MD TLE2037MD TLE2027MFK TLE2037MFK TLE2027MJG TLE2037MJG TLE2027MP TLE2037MP -- CERAMIC DIP (JG) PLASTIC DIP (P) The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2027ACDR). Chip forms are tested at 25C only. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. Copyright (c) 2002-2006, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. www.ti.com 1 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 description (continued) The ac performance of the TLE2027 and TLE2037 is highlighted by a typical unity-gain bandwidth specification of 15 MHz, 55 of phase margin, and noise voltage specifications of 3.3 nV/Hz and 2.5 nV/Hz at frequencies of 10 Hz and 1 kHz respectively. The TLE2037 and TLE2037A have been decompensated for faster slew rate (-7.5 V/s, typical) and wider bandwidth (50 MHz). To ensure stability, the TLE2037 and TLE2037A should be operated with a closed-loop gain of 5 or greater. Both the TLE20x7 and TLE20x7A are available in a wide variety of packages, including the industry-standard 8-pin small-outline version for high-density system applications. The C-suffix devices are characterized for operation from 0C to 70C. The I-suffix devices are characterized for operation from - 40C to 105C. The M-suffix devices are characterized for operation over the full military temperature range of - 55C to 125C. symbol OFFSET N1 IN + + IN - - OUT OFFSET N2 2 * POST OFFICE BOX 655303 DALLAS, TEXAS 75265 POST OFFICE BOX 1443 HOUSTON, TEXAS 77251-1443 * TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE202xY chip information This chip, when properly assembled, displays characteristics similar to the TLE202xC. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. The chip may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS (6) (4) (8) (7) (6) OFFSET N1 IN + IN - OFFSET N2 (1) (3) (2) VCC+ (7) + (6) - OUT (4) (8) VCC - (5) 90 (3) (7) (4) (2) CHIP THICKNESS: 15 MILS TYPICAL BONDING PADS: 4 x 4 MILS MINIMUM TJmax = 150C TOLERANCES ARE 10%. (1) (2) (3) (8) (1) ALL DIMENSIONS ARE IN MILS. PIN (4) IS INTERNALLY CONNECTED TO BACKSIDE OF CHIP. 73 3 4 IN - IN + Q1 Q3 Q2 Q4 OFFSET N1 OFFSET N2 Q6 Q5 Q7 Q8 Q9 equivalent schematic Q11 R1 Q10 R2 www.ti.com R3 Q16 Q15 Q12 Q14 Q18 Q17 Q13 R5 R4 Q20 C1 R11 R12 Q29 Q30 Q34 C3 Q33 R14 Q31 R13 Q32 R18 C4 R17 R16 Q37 61 26 1 4 Resistors epiFET Capacitors TLE2027 Transistors Q38 VCC - Q35 Q36 R15 4 1 26 61 TLE2037 ACTUAL DEVICE COMPONENT COUNT R7 R10 Q26 C2 COMPONENT R6 Q22 Q21 R8 Q25 Q28 Q23 Q24 Q19 Q27 R9 V CC+ R19 Q40 Q41 Q39 R20 Q46 Q45 Q47 Q44 R22 Q43 R21 Q42 R23 R25 Q54 Q57 Q56 Q55 Q60 Q59 Q58 R24 R26 Q52 Q53 Q50 Q51 Q48 Q49 Q62 OUT Q61 44 4 4 4 4 4 4 4 SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V Supply voltage, VCC - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 19 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 V Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Input current, II (each Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current into VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Total current out of VCC - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 105C M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 125C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Case temperature for 60 seconds, TC: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . 300C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC + and VCC - . 2. Differential voltages are at IN+ with respect to IN -. Excessive current flows if a differential input voltage in excess of approximately 1.2 V is applied between the inputs unless some limiting resistance is used. 3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 105C POWER RATING TA = 125C POWER RATING D 725 mW 5.8 mW/C 464 mW 261 mW 145 mW FK 1375 mW 11.0 mW/C 880 mW 495 mW 275 mW JG 1050 mW 8.4 mW/C 672 mW 378 mW 210 mW P 1000 mW 8.0 mW/C 640 mW 360 mW 200 mW recommended operating conditions C SUFFIX Supply voltage, VCC Common mode input voltage, voltage VIC Common-mode TA = 25C TA = Full range M SUFFIX MIN MAX MIN MAX MIN MAX 4 19 4 19 4 19 -11 11 -11 11 -11 11 -10.5 10.5 -10.4 10.4 -10.2 10.2 0 70 -40 105 -55 125 Operating free-air temperature, TA I SUFFIX UNIT V V C Full range is 0C to 70C for C-suffix devices, - 40C to 105C for I-suffix devices, and - 55C to 125C for M-suffix devices. www.ti.com 5 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7C electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TEST CONDITIONS TA 25C VOM + VOM - AVD Common mode input Common-mode voltage range Maximum positive peak p voltage g swing g output Maximum negative peak output voltage swing Large-signal Large signal differential voltage amplification RS = 50 100 1 0.006 1 V/mo 25C 6 90 6 90 150 15 25C 10.5 Full range 10 25C 12 -10 25C - 12 Full range - 11 Full range zo IO = 0 CMRR Common-mode Common mode rejection ratio VIC = VICRmin, RS = 50 kSVR Supply voltage rejection Supply-voltage ratio (VCC /VIO) 25C Full range 25C Full range 5 15 2 -13 to 13 12.9 10.5 12 -13 -10.5 11 -13 -10 -13.5 - 12 - 11 45 10 45 4 38 8 38 19 5 19 2 25C 50 50 94 VCC = 4 V to 18 V, RS = 50 Full range 92 V/ V V/V 2.5 8 25C V -13.5 8 VCC = 4 V to 18 V, RS = 50 V 13.2 25C 98 nA 12.9 10 13.2 nA V -10.5 to 10.5 0.5 100 90 150 -11 to 11 1 25C No load -13 to 13 2 3.5 Full range 0 VO = 0, 90 11 -10.5 Full range RL = 2 k Open-loop output impedance -11 to 11 Full range VO = 10 V, 150 150 -10.5 to 10.5 25C Input capacitance V V 0.006 RL = 2 k RL = 1 k 70 25C VO = 11 V, VO = 10 V V, 25 V/C 25C RL = 2 k 10 UNIT 1 Full range RL = 600 MAX 0.2 RS = 50 RL = 2 k TYP 1 25C RL = 600 MIN 0.4 Full range Ci Supply current 20 Full range VO = 10 V, RL = 600 ICC MAX 145 Full range VIC = 0, TLE20x7AC TYP Full range 25C VICR TLE20x7C MIN 131 117 pF 131 dB 114 144 110 144 dB 25C Full range 106 3.8 5.3 5.6 3.8 5.3 5.6 mA Full range is 0C to 70C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 6 www.ti.com TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7C operating characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise specified) PARAMETER SR Slew rate at unity gain Vn voltEquivalent input noise volt age (see Figure 2) VN(PP) Peak-to-peak equivalent input noise voltage In curEquivalent input noise cur rent THD Total harmonic distortion TEST CONDITIONS TLE20x7C MIN TYP TLE20x7AC MAX MIN TYP RL = 2 k, CL = 100 pF pF, See Figure 1 TLE2027 1.7 2.8 1.7 2.8 TLE2037 6 7.5 6 7.5 RL = 2 k, CL = 100 pF, TA = 0C to 70C, See Figure 1 TLE2027 1.2 1.2 TLE2037 5 5 MAX V/s RS = 20 , f = 10 Hz 3.3 8 3.3 4.5 RS = 20 , f = 1 kHz 2.5 4.5 2.5 3.8 50 250 50 130 f = 0.1 Hz to 10 Hz UNIT f = 10 Hz 10 25 10 25 f = 1 kHz 0.8 1.8 0.8 1.8 VO = + 10 V, AVD = 1, See Note 5 TLE2027 < 0.002% < 0.002% VO = + 10 V, AVD = 5, See Note 5 TLE2037 < 0.002% < 0.002% B1 Unity-gain bandwidth (see Figure 3) RL = 2 k, CL = 100 pF TLE2027 9(6) 13 9(6) 13 GBW Gain bandwidth product RL = 2 k, CL = 100 pF TLE2037 35 50 35 50 BOM Maximum output output-swing swing bandwidth RL = 2 k m Phase margin at unity gain (see Figure 3) RL = 2 k, CL = 100 pF nV/Hz nV pA/Hz MHz TLE2027 30 30 TLE2037 80 80 TLE2027 55 55 TLE2037 50 50 kHz NOTE 5: Measured distortion of the source used in the analysis was 0.002%. NOTE 6: This parameter is not production tested www.ti.com 7 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7I electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TEST CONDITIONS TA 25C VOM + VOM - Common mode input Common-mode voltage range Maximum positive peak p voltage g swing g output Maximum negative peak output voltage swing RS = 50 Large-signal Large signal differential voltage amplification RL = 2 k VO = 10 V V, RL = 1 k Input capacitance zo Open-loop output impedance IO = 0 CMRR Common-mode Common mode rejection ratio VIC = VICRmin, RS = 50 kSVR Supply voltage rejection Supply-voltage ratio (VCC /VIO) 25C 0.006 1 0.006 1 V/mo 25C 6 90 6 90 150 15 -11 to 11 Full range -10.4 to 10.4 25C 10.5 Full range 10 25C 12 -10 25C - 12 Full range - 11 Full range 25C Full range 25C Full range 90 -13 to 13 15 5 12.9 10.5 13.2 12 -13 -10.5 12.9 -13 -10 -13.5 - 12 - 11 45 10 45 3.5 38 8 38 19 5 19 1.1 25C 50 50 94 VCC = 4 V to 18 V, RS = 50 Full range 90 V/ V V/V 2.2 8 25C V -13.5 8 VCC = 4 V to 18 V, RS = 50 V 13.2 25C 96 nA 11 0.5 100 nA V 10 1 2 -13 to 13 -10.4 to 10.4 2 3.5 90 150 -11 to 11 11 -10.5 Full range 25C 150 150 25C No load V V V/C Full range VO = 0, 0 25 105 UNIT 1 25C RL = 2 k 10 MAX 0.2 Full range RL = 600 TYP 1 RS = 50 RL = 600 MIN 0.4 25C Ci Supply current 100 Full range VO = 10 V V, RL = 600 ICC 20 Full range VO = 11 V, RL = 2 k VO = 10 V, RL = 2 k AVD MAX 180 Full range VIC = 0, TLE20x7AI TYP Full range 25C VICR TLE20x7I MIN 131 117 pF 131 dB 113 144 110 144 dB 25C Full range 105 3.8 5.3 5.6 3.8 5.3 5.6 mA Full range is - 40C to 105C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 8 www.ti.com TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7I operating characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise specified) PARAMETER SR Slew rate at unity gain Vn Equivalent input noise voltage (see Figure 2) VN(PP) Peak-to-peak equivalent input noise voltage In Equivalent input noise current THD Total harmonic distortion TLE20x7I TEST CONDITIONS MIN TYP TLE20x7AI MAX MIN TYP RL = 2 k, CL = 100 pF pF, See Figure 1 TLE2027 1.7 2.8 1.7 2.8 TLE2037 6 7.5 6 7.5 RL = 2 k, CL = 100 pF, TA = - 40C to 85C, See Figure 1 TLE2027 1.1 1.1 TLE2037 4.7 4.7 MAX V/s RS = 20 , f = 10 Hz 3.3 8 3.3 4.5 RS = 20 , f = 1 kHz 2.5 4.5 2.5 3.8 50 250 50 130 f = 0.1 Hz to 10 Hz UNIT f = 10 Hz 10 25 10 25 f = 1 kHz 0.8 1,8 0.8 1.8 VO = + 10 V, AVD = 1, See Note 5 TLE2027 < 0.002% < 0.002% VO = + 10 V, AVD = 5, See Note 5 TLE2037 < 0.002% < 0.002% B1 Unity-gain bandwidth (see Figure 3) RL = 2 k, CL = 100 pF TLE2027 9(6) 13 9(6) 13 GBW Gain bandwidth product RL = 2 k, CL = 100 pF TLE2037 35 50 35 50 BOM Maximum output output-swing swing bandwidth RL = 2 k m Phase margin at unity gain (see Figure 3) RL = 2 k , CL = 100 pF nV/Hz nV pA/Hz MHz TLE2027 30 30 TLE2037 80 80 TLE2027 55 55 TLE2037 50 50 kHz NOTE 5: Measured distortion of the source used in the analysis was 0.002%. NOTE 6: This parameter is not production tested. www.ti.com 9 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7M electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Temperature coefficient of input offset voltage Input offset voltage long-term drift (see Note 4) IIO Input offset current IIB Input bias current TEST CONDITIONS TA 25C VOM + VOM - AVD Common mode input Common-mode voltage range Maximum positive peak p voltage g swing g output Maximum negative peak output voltage swing Large-signal L i l diff differential ti l voltage amplification RS = 50 RL = 2 k 25C 0.006 1* 0.006 1* V/mo 25C 6 90 6 90 15 -11 to 11 Full range -10.3 to 10.3 25C 10.5 Full range 10 25C 12 -10 25C - 12 Full range - 11 Full range 2.5 25C 3.5 Full range 1.8 IO = 0 CMRR Common-mode Common mode rejection ratio VIC = VICRmin, RS = 50 5 2 -13 to 13 -11 to 11 -13 to 13 12.9 10.5 12 -13 -10.5 11 -13 -10 -13.5 - 12 - 11 45 10 45 3.5 38 8 38 94 VCC = 4 V to 18 V, RS = 50 Full range 90 V/V 2.2 19 5 19 50 25C V -13.5 50 VCC = 4 V to 18 V, RS = 50 V 13.2 25C 96 nA 12.9 10 13.2 nA V -10.4 to 10.4 8 100 90 150 8 25C No load 15 25C Full range VO = 0, 0 90 11 -10.5 Full range 25C 150 150 VO = 10 V, RL = 2 k Open-loop output impedance Supply current 150 25C zo V V V/C VO = 11 V, RL = 2 k V, RL = 1 k VO = 10 V 25 105 UNIT 1* 25C RL = 2 k 10 MAX 0.2 Full range RL = 600 TYP 1* RS = 50 RL = 600 MIN 0.4 25C Ci ICC 100 Full range Input capacitance Supply voltage rejection Supply-voltage ratio (VCC /VIO) 20 Full range VO = 10 V V, RL = 600 kSVR MAX 200 Full range VIC = 0, TLE20x7AM TYP Full range 25C VICR TLE20x7M MIN 131 117 pF 131 dB 113 144 110 144 dB 25C Full range 105 3.8 5.3 5.6 3.8 5.3 5.6 mA * On products compliant to MIL-PRF-38535, this parameter is not production tested. Full range is - 55C to 125C. NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 10 www.ti.com TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7M operating characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise specified) PARAMETER SR Slew rate at unity gain Vn Equivalent input noise voltage (see Figure 2) VN(PP) Peak-to-peak equivalent input noise voltage In Equivalent input noise current THD Total harmonic distortion TLE20x7M TEST CONDITIONS MIN TYP TLE20x7AM MAX MIN TYP MAX RL = 2 k, CL = 100 pF pF, See Figure 1 TLE2027 1.7 2.8 1.7 2.8 TLE2037 6* 7.5 6* 7.5 RL = 2 k, CL = 100 pF, TA = - 55C to 125C, See Figure 1 TLE2027 1 1 TLE2037 4.4* 4.4* RS = 20 , f = 10 Hz 3.3 8* 3.3 8* RS = 20 , f = 1 kHz 2.5 4* 2.5 4* 225 375* 225 375* f = 0.1 Hz to 10 Hz V/s f = 10 Hz 25 25 f = 1 kHz 2.5 2.5 VO = + 10 V, AVD = 1, See Note 5 TLE2027 < 0.002% < 0.002% VO = + 10 V, AVD = 5, See Note 5 TLE2037 < 0.002% < 0.002% B1 Unity gain bandwidth Unity-gain (see Figure 3) RL = 2 k, CL = 100 pF BOM Maximum output output-swing swing bandwidth RL = 2 k m Phase margin at unity gain (see Figure 3) RL = 2 k, CL = 100 pF UNIT TLE2027 7* 13 9* 13 TLE2037 35 50 35 50 TLE2027 30 30 TLE2037 80 80 TLE2027 55 55 TLE2037 50 50 nV/Hz nV pA/Hz MHz kHz * On products compliant to MIL-PRF-38535, this parameter is not production tested. NOTE 5: Measured distortion of the source used in the analysis was 0.002%. www.ti.com 11 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7Y electrical characteristics, VCC = 15 V, TA = 25C (unless otherwise noted) PARAMETER VIO TEST CONDITIONS Input offset voltage Input offset current IIB Input bias current VIC = 0, VICR Common-mode input voltage range VOM + Maximum positive peak output voltage swing VOM - Maximum negative peak output voltage swing AVD MIN TYP 20 Input offset voltage long-term drift (see Note 4) IIO TLE20x7Y RS = 50 UNIT V V/mo 6 nA 15 nA RS = 50 -13 to 13 V RL = 600 12.9 RL = 2 k 13.2 -13 RL = 600 RL = 2 k Large-signal differential voltage amplification 0.006 MAX -13.5 VO = 11 V, RL = 2 k 45 VO = 10 V, RL = 1 k 38 VO = 10 V, RL = 600 19 50 8 V V V/V Ci Input capacitance zo Open-loop output impedance IO = 0 CMRR Common-mode rejection ratio VIC = VICRmin, RS = 50 131 dB kSVR Supply-voltage rejection ratio (VCC VCC = 4 V to 18 V, RS = 50 144 dB ICC Supply current VO = 0, 3.8 mA /VIO) No load pF NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150C extrapolated to TA = 25C using the Arrhenius equation and assuming an activation energy of 0.96 eV. 12 www.ti.com TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TLE20x7Y operating characteristics at specified free-air temperature, VCC = 15 V PARAMETER SR Slew rate at unity gain Vn Equivalent input noise voltage (see Figure 2) VN(PP) Peak-to-peak equivalent input noise voltage In Equivalent input noise current THD Total harmonic distortion TLE20x7Y TEST CONDITIONS RL = 2 k, CL = 100 pF, See Figure 1 MIN TYP TLE2027 2.8 TLE2037 7.5 RS = 20 , f = 10 Hz 3.3 RS = 20 , f = 1 kHz 2.5 f = 0.1 Hz to 10 Hz 50 f = 10 Hz 10 f = 1 kHz 0.8 VO = + 10 V, AVD = 1, See Note 5 TLE2027 < 0.002% VO = + 10 V, AVD = 5, See Note 5 TLE2037 < 0.002% TLE2027 13 TLE2037 50 TLE2027 30 TLE2037 80 TLE2027 55 TLE2037 50 B1 Unity gain bandwidth (see Figure 3) Unity-gain RL = 2 k k, BOM Maximum output-swing output swing bandwidth RL = 2 k m Phase margin at unity gain (see Figure 3) RL = 2 k k, CL = 100 pF CL = 100 pF MAX UNIT V/ s V/s nV/Hz nV pA/Hz MHz kHz NOTE 5: Measured distortion of the source used in the analysis was 0.002%. www.ti.com 13 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 PARAMETER MEASUREMENT INFORMATION 2 k Rf 15 V 15 V - - VO VO RI + + VI CL = 100 pF (see Note A) - 15 V RL = 2 k 20 20 - 15 V NOTE A: CL includes fixture capacitance. Figure 1. Slew-Rate Test Circuit Figure 2. Noise-Voltage Test Circuit Rf 10 k VI 100 15 V 15 V - - VI + -15 V CL = 100 pF (see Note A) + CL = 100 pF (see Note A) - 15 V 2 k NOTE A: CL includes fixture capacitance. 2 k NOTES: A. CL includes fixture capacitance. B. For the TLE2037 and TLE2037A, AVD must be 5. Figure 3. Unity-Gain Bandwidth and Phase-Margin Test Circuit (TLE2027 Only) 14 VO RI VO Figure 4. Small-Signal PulseResponse Test Circuit www.ti.com TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 typical values Typical values presented in this data sheet represent the median (50% point) of device parametric performance. initial estimates of parameter distributions In the ongoing program of improving data sheets and supplying more information to our customers, Texas Instruments has added an estimate of not only the typical values but also the spread around these values. These are in the form of distribution bars that show the 95% (upper) points and the 5% (lower) points from the characterization of the initial wafer lots of this new device type (see Figure 5). The distribution bars are shown at the points where data was actually collected. The 95% and 5% points are used instead of 3 sigma since some of the distributions are not true Gaussian distributions. The number of units tested and the number of different wafer lots used are on all of the graphs where distribution bars are shown. As noted in Figure 5, there were a total of 835 units from two wafer lots. In this case, there is a good estimate for the within-lot variability and a possibly poor estimate of the lot-to-lot variability. This is always the case on newly released products since there can only be data available from a few wafer lots. The distribution bars are not intended to replace the minimum and maximum limits in the electrical tables. Each distribution bar represents 90% of the total units tested at a specific temperature. While 10% of the units tested fell outside any given distribution bar, this should not be interpreted to mean that the same individual devices fell outside every distribution bar. SUPPLY CURRENT vs FREE-AIR TEMPERATURE IIIIIIII IIIIIIII IIIIIIII IIIIIIII I CC - Supply Current - mA 5 4.5 95% point on the distribution bar (5% of the devices fell above this point.) VCC = 15 V VO = 0 No Load Sample Size = 835 Units From 2 Water Lots 90% of the devices were within the upper and lower points on the distribution bar. 5% point on the distribution bar (5% of the devices fell below this point.) 4 3.5 3 2.5 - 75 - 50 - 25 0 25 50 75 100 125 150 TA - Free-Air Temperature - C Figure 5. Sample Graph With Distribution Bars www.ti.com 15 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS Table of Graphs FIGURE VIO Input offset voltage Distribution 6, 7 VIO Input offset voltage change vs Time after power on 8, 9 IIO Input offset current vs Free-air temperature 10 IIB Input bias current vs vs Free-air Free air temperature Common-mode input voltage 11 12 II Input current vs Differential input voltage VO(PP) Maximum peak-to-peak output voltage vs Frequency 14, 15 VOM Maximum (positive/negative) peak output voltage vs vs Load resistance Free-air temperature 16, 17 18, 19 AVD Large signal differential voltage amplification Large-signal vs vs vs vs Supply voltage Load resistance Frequency Free-air temperature 20 21 22 - 25 26 zo Output impedance vs Frequency 27 CMRR Common-mode rejection ratio vs Frequency 28 kSVR Supply-voltage rejection ratio vs Frequency 29 IOS Short-circut Short circut output current vs vs vs Supply voltage Elapsed time Free-air temperature 30, 31 32, 33 34, 35 ICC Supply current vs vs Supply voltage Free-air temperature 36 37 Voltage follower pulse response Voltage-follower Small signal Large signal Equivalent input noise voltage vs Noise voltage (referred to input) Over 10-second interval 43 Unity gain bandwidth Unity-gain vs vs Supply voltage Load capacitance 44 45 Gain bandwidth product vs vs Supply voltage Load capacitance 46 47 Slew rate vs Free-air temperature 48, 49 Phase margin vs vs vs Supply voltage Load capacitance Free-air temperature 50, 51 52, 53 54, 55 Phase shift vs Frequency 22 - 25 Vn B1 SR m 16 www.ti.com Frequency 13 38, 40 39, 41 42 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS DISTRIBUTION INPUT OFFSET VOLTAGE Percentage of Amplifiers - % 14 12 IIIIIIIIIIII IIII 1568 Amplifiers Tested From 2 Wafer Lots VCC = +15 V TA = 25C D Package 10 8 6 4 2 0 - 120 - 90 - 60 - 30 0 30 60 90 120 VIO - Input Offset Voltage - V INPUT OFFSET VOLTAGE CHANGE vs TIME AFTER POWER ON AVIO VIO - Change in Input Offset Voltage - V 16 12 10 8 6 IIIIIIIIIII AAAAAA AAAAAA AA IIIIIIIIIII AA IIII AAAAAA AA IIII 4 50 Amplifiers Tested From 2 Wafer Lots VCC = 15 V TA = 25C D Package 2 0 0 10 20 30 40 50 t - Time After Power On - s Figure 6 Figure 7 INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE 6 30 5 25 3 IIIIIIIIIII IIIIIIIIIII AA IIII AA IIII 2 50 Amplifiers Tested From 2 Wafer Lots VCC = 15 V TA = 25C P Package 1 0 0 20 40 60 80 IIO I IO - Input Offset Current - nA AVIO VIO - Change in Input Offset Voltage - V INPUT OFFSET VOLTAGE CHANGE vs TIME AFTER POWER ON 4 AAAAAAA AAAAAAA AAAAAAA AAAAAAA VCC = 15 V VIC = 0 Sample Size = 833 Units From 2 Wafer Lots 20 15 10 5 0 - 75 - 50 - 25 100 120 140 160 180 t - Time After Power On - s 0 25 50 75 100 125 150 TA - Free-Air Temperature - C Figure 8 60 Figure 9 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com 17 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE VCC = 15 V VIC = 0 Sample Size = 836 Units From 2 Wafer Lots IIIB IB - Input Bias Current - nA 50 40 30 20 10 0 40 35 IIIB IB - Input Bias Current - nA AAAAAAAA AAAAAAAA AAAAAAAA AAAAAAAA 60 INPUT BIAS CURRENT vs COMMON-MODE INPUT VOLTAGE 30 25 20 15 10 -10 5 -20 -75 -50 -25 0 25 50 75 100 125 150 TA - Free-Air Temperature - C 0 -12 Figure 10 IIII - Input Current - mA 0.6 0.4 AAAAA AAAAA AAAAA VCC = 15 V VIC = 0 TA = 25C 0.2 0 - 0.2 - 0.4 - 0.6 - 0.8 -1 - 1.8 - 1.2 - 0.6 0 0.6 1.2 1.8 VID - Differential Input Voltage - V 18 IIIII IIIII IIIII 30 VCC = 15 V RL = 2 k 25 20 15 TA = 125C 10 5 TA = - 55C 0 10 k 100 k 1M f - Frequency - Hz Figure 13 Figure 12 12 TLE2027 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY VO(PP) - Maximum Peak-to-Peak Output Voltage - V 0.8 -8 -4 0 4 8 VIC - Common-Mode Input Voltage - V Figure 11 INPUT CURRENT vs DIFFERENTIAL INPUT VOLTAGE 1 VCC = 15 V TA = 25C Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com 10 M TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS 20 IIII IIII 15 TA = 125C 10 TA = - 55C 5 0 10 k 100 k 1M 10 M 100 M f - Frequency - Hz Figure 14 - 14 - 12 - 10 -8 -6 AAAAA AAAAA AA AAAAA AA AA -4 0 100 VCC = 15 V TA = 25C 1k RL - Load Resistance - 12 10 8 6 4 AAAAAA AAAAAAAA AAAAAAAA AA VCC = 15 V TA = 25C 2 0 100 1k RL - Load Resistance - 10 k 10 k MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 13.5 13.4 13.3 IIIII IIIII IIIII IIIIII IIIIIII IIIIII IIIIIII VCC = 15 V RL = 2 k Sample Size = 832 Units From 2 Wafer Lots 13.2 13.1 AA AA AA Figure 16 14 Figure 15 MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE -2 VVOM+ OM + - Maximum Positive Peak Output Voltage - V VCC = 15 V RL = 2 k 25 AAA AAA AAA VVOM- OM - - Maximum Negative Peak Output Voltage - V IIIII AAAAA AAAAA IIIII AAAAA IIIII 30 MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE VVOM+ OM + - Maximum Positive Peak Output Voltage - V VO(PP) VO(PP) - Maximum Peak-to-Peak Output Voltage - V TLE2037 MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE vs FREQUENCY 13 12.9 - 75 - 50 - 25 0 25 50 75 100 125 150 TA - Free-Air Temperature - C Figure 17 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com 19 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE IIIII IIIII IIIIIIII IIIIIIII IIIIII IIIIII - 13 VCC = 15 V RL = 2 k Sample Size = 831 Units From 2 Wafer Lots - 13.2 - 13.4 AA AA AA - 13.6 - 13.8 AAA AAA AAA 50 AVD AVD - Large-Signal differential Voltage Amplification - V/ V VVOM- OM - - Maximum Negative Peak Output Voltage - V TYPICAL CHARACTERISTICS - 14 - 75 - 50 - 25 25 50 75 100 125 150 TA = 25C RL = 2 k 40 RL = 1 k 30 20 RL = 600 10 0 0 IIII 4 0 8 12 16 VCC - Supply Voltage - V TA - Free-Air Temperature - C Figure 19 Figure 18 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs LOAD RESISTANCE 50 AAAA AAAA AAAA AVD AVD - Large-Signal differential Voltage Amplification - V/ V VCC = 15 V AA AA AA 40 TA = 25C 30 20 10 0 100 200 400 1k 2k 4k 10 k RL - Load Resistance - Figure 20 20 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com 20 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS TLE2027 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 160 75 Phase Shift 100 125 120 AVD 100 150 80 175 60 200 AA AA 40 0 225 VCC = 15 V RL = 2 k CL = 100 pF TA = 25C 20 250 100 100 k f - Frequency - Hz 0.1 Phase Shift AVD AVD- Large-Signal Differential Voltage Amplification - dB 140 275 100 M Figure 21 TLE2037 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY IIIII IIIII II II AVD AVD - Large-Signal Differential Voltage Amplification - dB 140 A A A Phase Shift 120 AVD 100 80 60 40 20 AAAAA AAAAA AAAAA AAAAA 0 0.1 75 100 125 150 175 200 VCC = 15 V 225 RL = 2 k CL = 100 pF TA = 25C 250 100 100 k Phase Shift 160 275 100 M f - Frequency - MHz Figure 22 www.ti.com 21 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS AA AA AA 6 100 3 125 0 150 -3 175 AVD 200 -6 Phase Shift 225 -9 IIIII IIIII IIIII - 12 - 18 250 VCC = 15 V RL = 2 k CL = 100 pF TA = 25C - 15 10 20 Phase Shift AVD AVD- Large-Signal Differential Voltage Amplification - dB TLE2027 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 275 40 70 300 100 f - Frequency - MHz Figure 23 TLE2037 LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT vs FREQUENCY 30 100 III IIIII AVD 20 150 15 175 10 200 5 225 AA AAAAA AA AAAAA AAAAA AAAAA VCC = 15 V RL = 2 k CL = 100 pF TA = 25C 0 -5 -10 1 2 250 275 4 10 20 f - Frequency - MHz Figure 24 22 125 Phase Shift www.ti.com 40 100 300 Phase Shift AVD AVD - Large-Signal Differential Voltage Amplification - dB 25 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREE-AIR TEMPERATURE OUTPUT IMPEDANCE vs FREQUENCY 60 AAAAA AA AAAAA AA 100 AA AA AA VCC = 15 V TA = 25C IIIII IIIII IIIII 50 zo z o - Output Impedance - AVD AVD - Large-Signal differential Voltage Amplification - V/ V VCC = 15 V RL = 2 k RL = 1 k 0 25 50 75 10 100 1k 10 k 100 k 1M 10 M 100 M Figure 26 COMMON-MODE REJECTION RATIO vs FREQUENCY SUPPLY-VOLTAGE REJECTION RATIO vs FREQUENCY IIIII AAAA AAAA IIIII IIII AAAA VCC = 15 V TA = 25C 120 100 80 60 40 20 100 1k 10 k 100 k 1 M f - Frequency - Hz IIIIII AAAA AAAA IIII 140 KSVR - Supply-Voltage Rejection Ratio - dB CMRR - Common-Mode Rejection Ratio - dB -10 f - Frequency - Hz NOTE A: For this curve, the TLE2027 is AVD = 1 and the TLE2037 is AVD = 5. 10 M 100 M Figure 27 AVD = 10 Figure 25 140 10 See Note A 1 -100 100 125 150 TA - Free-Air Temperature - C 0 AVD = 100 AA AA 40 30 -75 -50 -25 10 VCC = 15 V TA = 25C 120 IIII 100 kSVR - 80 III III 60 kSVR + 40 20 0 10 100 1k 10 k 100 k 1 M f - Frequency - Hz 10 M 100 M Figure 28 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com 23 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE SHORT-CIRCUIT OUTPUT CURRENT vs SUPPLY VOLTAGE AAAAA AAAAA AAAAA AAAAA IIII VID = 100 mV VO = 0 TA = 25C P Package -40 -38 -36 -34 AA AA -32 -30 0 2 4 6 8 10 12 14 16 VCC - Supply Voltage - V 18 AAAAAA AAAAAA AAAAAA AAAAAA 44 IIOS OS - Short-Circuit Output Current - mA IIOS OS - Short-Circuit Output Current - mA -42 20 VID = - 100 mV VO = 0 TA = 25C P Package 42 40 38 36 34 AA AA 32 30 0 2 4 6 8 10 12 14 16 VCC - Supply Voltage - V Figure 29 44 VCC = 15 V VID = 100 mV VO = 0 TA = 25C P Package - 41 IIOS OS - Short-Circuit Output Current - mA IIOS OS - Short-Circuit Output Current - mA SHORT-CIRCUIT OUTPUT CURRENT vs ELAPSED TIME AAAAA AAAAA AAAAA AAAAA IIII - 43 - 39 AAA AAA AAA - 37 - 35 0 30 60 90 120 t - Elasped Time - s 150 180 AA AA Figure 31 24 20 Figure 30 SHORT-CIRCUIT OUTPUT CURRENT vs ELAPSED TIME - 45 18 42 40 AAAAA AAAAA AAAAA AAAAA IIIII AAAAA VCC = 15 V VID = 100 mV VO = 0 TA = 25C P Package 38 36 34 0 30 60 90 120 t - Elasped Time - s Figure 32 www.ti.com 150 180 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE AAAAA AAAAA AAAAA AAAAA - 48 - 44 - 40 - 36 - 32 AA AA AA - 28 - 24 - 75 - 50 - 25 0 25 50 75 100 125 150 TA - Free-Air Temperature - C 38 34 AA AA AA 30 26 - 75 - 50 - 25 0 25 50 75 100 125 150 TA - Free-Air Temperature - C Figure 34 SUPPLY CURRENT vs FREE-AIR TEMPERATURE SUPPLY CURRENT vs SUPPLY VOLTAGE 5 VO = 0 No Load IIII IIII IIII IIII IIII TA = 125C 4 IICC CC - Supply Current - mA ICC I CC - Supply Current - mA 5 AAAA AAAA TA = 25C 3 TA = - 55C AA AA 2 0 2 4 6 8 10 12 14 16 VCC - Supply Voltage - V 18 20 Figure 35 4.5 4 AAAAAAA AAAAAAA AAAAAAA AAAAAAA VCC = 15 V VO = 0 No Load Sample Size = 836 Units From 2 Wafer Lots 3.5 AA AA 1 0 VCC = 15 V VID = - 100 mV VO = 0 P Package 42 Figure 33 6 AAAAA AAAAA AAAAA AAAAA 46 VCC = 15 V VID = 100 mV VO = 0 P Package IIOS OS - Short-Circuit Output Current - mA IIOS OS - Short-Circuit Output Current - mA SHORT-CIRCUIT OUTPUT CURRENT vs FREE-AIR TEMPERATURE 3 2.5 - 75 - 50 - 25 0 25 50 75 100 125 150 TA - Free-Air Temperature - C Figure 36 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com 25 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS TLE2027 VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE IIIII IIIII IIIII IIIII 100 50 IIIII IIIII IIIII IIIII 15 VCC = 15 V RL = 2 k CL = 100 pF TA = 25C See Figure 4 10 VO - Output Voltage - V VO - Output Voltage - mV TLE2027 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 0 - 50 VCC = 15 V RL = 2 k CL = 100 pF TA = 25C See Figure 1 5 0 -5 - 10 - 100 0 200 400 600 t - Time - ns 800 - 15 1000 0 5 Figure 37 IIIIII IIIIII IIIII IIIII 15 50 - 100 V VO O - Output Voltage - V V VO O - Output Voltage - mV 10 AAAAAA AAAAAA AAAAAA AAAAAA AA AA VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF TA = 25C See Figure 4 - 50 0 100 200 300 400 t - Time - ns Figure 39 26 25 TLE2037 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 100 AA AA 20 Figure 38 TLE2037 VOLTAGE-FOLLOWER SMALL-SIGNAL PULSE RESPONSE 0 10 15 t - Time - s 5 VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF TA = 25C See Figure 1 0 -5 - 10 - 15 0 2 4 6 t - Time - s Figure 40 www.ti.com 8 10 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS AAAAAAA AAAAAAA AAAAAAA AAAAAAA AAAAAAA Vn V n - Equivalent Input Noise Voltage - nVHz nV/ Hz 10 8 6 AAAAAA AAAAAA AAAAAA AAAAAA 50 VCC = 15 V RS = 20 TA = 25C See Figure 2 Sample Size = 100 Units From 2 Wafer Lots VCC = 15 V 40 f = 0.1 to 10 Hz TA = 25C 30 Noise Voltage - nV AA AA AA NOISE VOLTAGE (REFERRED TO INPUT) OVER A 10-SECOND INTERVAL EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 4 2 20 10 0 - 10 - 20 - 30 - 40 0 1 10 100 1k 10 k - 50 100 k 0 2 4 f - Frequency - Hz Figure 41 Gain-Bandwidth Product - MHz B1 - Unity-Gain Bandwidth - MHz AAAAA AAAAA AAAAA AAAAA 52 16 14 12 10 2 4 6 8 10 12 14 16 18 | VCC | - Supply Voltage - V 20 22 f = 100 kHz RL = 2 k CL = 100 pF TA = 25C 51 50 49 48 0 10 TLE2037 GAIN-BANDWIDTH PRODUCT vs SUPPLY VOLTAGE RL = 2 k CL = 100 pF TA = 25C See Figure 3 18 8 Figure 42 TLE2027 UNITY-GAIN BANDWIDTH vs SUPPLY VOLTAGE 20 6 t - Time - s 0 2 4 6 8 10 12 14 16 18 20 VCC - Supply Voltage - V Figure 44 Figure 43 www.ti.com 27 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS TLE2027 UNITY-GAIN BANDWIDTH vs LOAD CAPACITANCE 12 8 4 0 100 1000 CL - Load Capacitance - pF AAAAAA AAAAAA AAAAAA 52 VCC = 15 V RL = 2 k TA = 25C See Figure 3 VCC = 15 V RL = 2 k TA = 25C Gain-Bandwidth Product - MHz B1 - Unity-Gain Bandwidth - MHz 16 TLE2037 GAIN-BANDWIDTH PRODUCT vs LOAD CAPACITANCE 51 50 49 48 100 10000 1000 Figure 45 Figure 46 TLE2027 SLEW RATE vs FREE-AIR TEMPERATURE TLE2037 SLEW RATE vs FREE-AIR TEMPERATURE 3 SR - Slew Rate - V/ s SR - Slew Rate - V/ s 9 2.6 2.2 IIIII IIIII IIIII IIIII VCC = 15 V AVD = 1 RL = 2 k CL = 100 pF See Figure 1 2 - 75 - 50 - 25 0 25 50 75 8 7 5 - 75 - 50 - 25 0 25 50 75 100 125 150 TA - Free-Air Temperature - C 100 125 150 Figure 47 28 VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF See Figure 1 6 TA - Free-Air Temperature - C IIIIII AAAAA AAAAA IIIIII AAAAA AAAAA AAAAA 10 2.8 2.4 10000 CL - Load Capacitance - pF Figure 48 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS TLE2027 PHASE MARGIN vs SUPPLY VOLTAGE 56 m - Phase Margin 54 52 IIIII IIIII IIIII IIIII 52 RL = 2 k CL = 100 pF TA = 25C See Figure 3 50 m - Phase Margin 58 TLE2037 PHASE MARGIN vs SUPPLY VOLTAGE 50 AA AA 48 46 AVD = 5 RL = 2 k CL = 100 pF TA = 25C 46 44 42 40 44 42 48 AAAAA AAAAA AAAAA AAAAA 38 0 2 4 6 8 10 12 14 16 18 20 22 0 | VCC | - Supply Voltage - V AA AA 30 20 12 14 16 18 20 AAAAA AAAAA AAAAA VCC = 15 V RL = 2 k TA = 25C 50 40 30 20 10 10 0 10 60 m - Phase Margin m - Phase Margin 40 8 TLE2037 PHASE MARGIN vs LOAD CAPACITANCE VCC = 15 V RL = 2 k TA = 25C See Figure 3 50 6 Figure 50 TLE2027 PHASE MARGIN vs LOAD CAPACITANCE IIIII IIIII IIIII IIIII 4 VCC - Supply Voltage - V Figure 49 60 2 100 0 100 1000 CL - Load Capacitance - pF 1000 10000 CL - Load Capacitance - pF Figure 51 Figure 52 www.ti.com 29 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 TYPICAL CHARACTERISTICS TLE2027 PHASE MARGIN vs FREE-AIR TEMPERATURE IIIII IIIII IIIII 65 AAAAAA AAAAAA AAAAAA AAAAAA VCC = 15 V AVD = 5 RL = 2 k CL = 100 pF 53 55 m - Phase Margin m - Phase Margin 60 AA AA 55 VCC = 15 V RL = 2 k TA = 25C See Figure 3 TLE2037 PHASE MARGIN vs FREE-AIR TEMPERATURE 50 45 51 49 47 40 35 0 25 50 75 100 - 75 - 50 - 25 TA - Free-Air Temperature - C 125 150 45 - 75 - 50 - 25 30 25 50 75 100 125 150 TA - Free-Air Temperature - C Figure 53 0 Figure 54 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. www.ti.com TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 APPLICATION INFORMATION input offset voltage nulling The TLE2027 and TLE2037 series offers external null pins that can be used to further reduce the input offset voltage. The circuits of Figure 55 can be connected as shown if the feature is desired. If external nulling is not needed, the null pins may be left disconnected. 1 k 10 k VCC + 4.7 k VCC + 4.7 k IN - - - IN - OUT OUT IN + + + IN + VCC - VCC - (a) STANDARD ADJUSTMENT (b) ADJUSTMENT WITH IMPROVED SENSITIVITY Figure 55. Input Offset Voltage Nulling Circuits voltage-follower applications The TLE2027 circuitry includes input-protection diodes to limit the voltage across the input transistors; however, no provision is made in the circuit to limit the current if these diodes are forward biased. This condition can occur when the device is operated in the voltage-follower configuration and driven with a fast, large-signal pulse. It is recommended that a feedback resistor be used to limit the current to a maximum of 1 mA to prevent degradation of the device. Also, this feedback resistor forms a pole with the input capacitance of the device. For feedback resistor values greater than 10 k, this pole degrades the amplifier phase margin. This problem can be alleviated by adding a capacitor (20 pF to 50 pF) in parallel with the feedback resistor (see Figure 56). CF = 20 to 50 pF IF 1 mA RF VCC - VO VI + VCC - Figure 56. Voltage Follower www.ti.com 31 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 APPLICATION INFORMATION macromodel information Macromodel information provided was derived using Microsim PartsTM, the model generation software used with Microsim PSpice TM. The Boyle macromodel (see Note 6) and subcircuit in Figure 57, Figure 58, and Figure 59 were generated using the TLE20x7 typical electrical and operating characteristics at 25C. Using this information, output simulations of the following key parameters can be generated to a tolerance of 20% (in most cases): * * * * * * * * * * * * Maximum positive output voltage swing Maximum negative output voltage swing Slew rate Quiescent power dissipation Input bias current Open-loop voltage amplification Gain-bandwidth product Common-mode rejection ratio Phase margin DC output resistance AC output resistance Short-circuit output current limit NOTE 6: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, "Macromodeling of Integrated Circuit Operational Amplifiers", IEEE Journal of Solid-State Circuits, SC-9, 353 (1974). 3 VCC + IN + IN - 1 rp rc1 c1 dp + 13 14 ree cee re2 10 lee 4 - ve 53 dc - ro2 vb r2 gcm 90 hlim C2 6 ga 7 + vlim 8 - 5 + OUT PSpice and Parts are trademarks of MicroSim Corporation. www.ti.com + dip - ro1 54 de Figure 57. Boyle Macromodel 32 dln - fb - + vc Q2 re1 VCC - rc2 12 11 Q1 2 9 egnd 99 + 91 + vip - 92 - + vin TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 APPLICATION INFORMATION macromodel information (continued) q2 12 1 14 qx r2 6 9 100.0E3 rc1 3 11 530.5 rc2 3 12 530.5 re1 13 10 -393.2 re2 14 10 -393.2 ree 10 99 3.571E6 ro1 8 5 25 ro2 7 99 25 rp 3 4 8.013E3 vb 9 0 dc 0 vc 3 53 dc 2.400 ve 54 4 dc 2.100 vlim 7 8 dc 0 vlp 91 0 dc 40 vln 0 92 dc 40 .modeldx D(Is=800.0E-18) .modelqx NPN(Is=800.0E-18 Bf=7.000E3) .ends .subckt TLE2027 1 2 3 4 5 * c1 11 12 4.003E-12 c2 6 7 20.00E-12 dc 5 53 dz de 54 5 dz dlp 90 91 dz dln 92 90 dx dp 4 3 dz egnd 99 0 poly(2) (3,0) (4,0) 0 5 .5 fb 7 99 poly(5) vb vc ve vlp vln 0 954.8E6 -1E9 1E9 1E9 -1E9 ga 6 0 11 12 2.062E-3 gcm 0 6 10 99 531.3E-12 iee 10 4 dc 56.01E-6 hlim 90 0 vlim 1K q1 11 2 13 qx Figure 58. TLE2027 Macromodel Subcircuit .subckt TLE2037 1 2 3 4 5 * c1 11 12 4.003E-12 c2 6 7 7.500E-12 dc 5 53 dz de 54 5 dz dlp 90 91 dz dln 92 90 dx dp 4 3 dz egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5 fb 7 99 poly(5) vb vc ve vip vln 0 923.4E6 A800E6 800E6 800E6 A800E6 ga 6 0 11 12 2.121E-3 gcm 0 6 10 99 597.7E-12 iee 10 4 dc 56.26E-6 hlim 90 0 vlim 1K q1 11 2 13 qx q2 12 1 14 qz r2 6 9 100.0E3 rc1 3 11 471.5 rc2 3 12 471.5 re1 13 10 A448 re2 14 10 A448 ree 10 99 3.555E6 ro1 8 5 25 ro2 7 99 25 rp 3 4 8.013E3 vb 9 0 dc 0 vc 3 53 dc 2.400 ve 54 4 dc 2.100 vlim 7 8 dc 0 vlp 91 0 dc 40 vln 0 92 dc 40 .model dxD(Is=800.0E-18) .model qxNPN(Is=800.0E-18 Bf=7.031E3) .ends Figure 59. TLE2037 Macromodel Subcircuit www.ti.com 33 TLE2027, TLE2037, TLE2027A, TLE2037A, TLE2027Y, TLE2037Y EXCALIBUR LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS SLOS192C - FEBRUARY 1997 - REVISED APRIL 2010 REVISION HISTORY Changes from Revision B (October 2006) to Revision C * 34 Changed values of Vn, VN(PP), and In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . 11 www.ti.com PACKAGE OPTION ADDENDUM www.ti.com 27-Apr-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-9089601MPA ACTIVE CDIP JG 8 1 TBD Call TI Call TI 5962-9089602MPA OBSOLETE CDIP JG 8 TBD Call TI Call TI 5962-9089603Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-9089603QPA ACTIVE CDIP JG 8 1 TBD Call TI Call TI TLE2027ACD OBSOLETE SOIC D 8 TBD Call TI Call TI TLE2027ACP OBSOLETE PDIP P 8 TBD Call TI Call TI TLE2027AID OBSOLETE SOIC D 8 TBD Call TI Call TI TLE2027AIP OBSOLETE PDIP P 8 TBD Call TI Call TI TLE2027AMD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027AMDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027AMFKB ACTIVE LCCC FK 20 1 TBD TLE2027AMJG ACTIVE CDIP JG 8 1 TBD TLE2027AMJGB ACTIVE CDIP JG 8 1 TBD TLE2027CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027CP OBSOLETE PDIP P 8 TLE2027ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 POST-PLATE N / A for Pkg Type A42 N / A for Pkg Type A42 N / A for Pkg Type Call TI Samples (Requires Login) 5962-9089601M2A TBD (3) Call TI PACKAGE OPTION ADDENDUM www.ti.com 27-Apr-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty 2500 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 8 CU NIPDAU Level-1-260C-UNLIM TLE2027IP OBSOLETE PDIP P 8 TLE2027MD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027MDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2027MFKB ACTIVE LCCC FK 20 1 TBD Call TI Call TI POST-PLATE N / A for Pkg Type TLE2027MJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type TLE2027MJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type TLE2037ACD OBSOLETE SOIC D 8 TBD Call TI Call TI TLE2037ACP OBSOLETE PDIP P 8 TBD Call TI Call TI TLE2037AID OBSOLETE SOIC D 8 TBD Call TI Call TI Call TI Call TI TBD TLE2037AIP OBSOLETE PDIP P 8 TLE2037AMD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037AMDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037AMJGB OBSOLETE CDIP JG 8 TLE2037CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037CP OBSOLETE PDIP P 8 TLE2037ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD TBD Addendum-Page 2 Call TI Call TI Samples (Requires Login) TLE2027IDRG4 TBD (3) Call TI Call TI PACKAGE OPTION ADDENDUM www.ti.com 27-Apr-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty 2500 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) TLE2037IDRG4 ACTIVE SOIC D 8 TLE2037IP OBSOLETE PDIP P 8 TLE2037MD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037MDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLE2037MFKB OBSOLETE LCCC FK 20 TBD Call TI Call TI TLE2037MJGB OBSOLETE CDIP JG 8 TBD Call TI Call TI TBD (3) CU NIPDAU Level-1-260C-UNLIM Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF TLE2027, TLE2027A, TLE2027AM, TLE2027M, TLE2037, TLE2037A : Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 27-Apr-2012 * Catalog: TLE2027A, TLE2027 * Automotive: TLE2037-Q1, TLE2037A-Q1 * Enhanced Product: TLE2027-EP, TLE2027-EP * Military: TLE2027M, TLE2027AM NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects * Enhanced Product - Supports Defense, Aerospace and Medical Applications * Military - QML certified for Military and Defense Applications Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2010 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TLE2027CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2027IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2037CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLE2037IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 23-Sep-2010 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLE2027CDR SOIC D 8 2500 340.5 338.1 20.6 TLE2027IDR SOIC D 8 2500 340.5 338.1 20.6 TLE2037CDR SOIC D 8 2500 340.5 338.1 20.6 TLE2037IDR SOIC D 8 2500 340.5 338.1 20.6 Pack Materials-Page 2 MECHANICAL DATA MCER001A - JANUARY 1995 - REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated