IRFN150
2www.irf.com
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter Min Typ Max Units T est Conditions
BVDSS Drain-to-Source Breakdown Voltage 100 — — V VGS = 0V, ID = 1.0mA
∆BVDSS/∆TJTemperature Coefficient of Breakdown — 0.13 — V/°C Reference to 25°C, ID = 1.0mA
Voltage
RDS(on) Static Drain-to-Source On-State — — 0.07 VGS = 10V, ID = 21A
Resistance — — 0.081 VGS = 10V, ID = 34A
VGS(th) Gate Threshold Voltage 2.0 — 4.0 V VDS = VGS, ID = 250µA
gfs Forward Transconductance 9.0 — — S ( )V
DS > 15V, IDS = 21A ➃
IDSS Zero Gate Voltage Drain Current — — 25 VDS= 80V ,VGS=0V
— — 250 VDS = 80V,
VGS = 0V, TJ = 125°C
IGSS Gate-to-Source Leakage Forward — — 100 VGS = 20V
IGSS Gate-to-Source Leakage Reverse — — -100 VGS = -20V
QgTotal Gate Charge — — 125 VGS =10V, ID = 34A
Qgs Gate-to-Source Charge — — 22 nC VDS = 50V
Qgd Gate-to-Drain (‘Miller’) Charge — — 65
td(on) Turn-On Delay Time — — 35 VDD = 50V, ID = 34A,
trRise Time — — 190 VGS =10V, RG = 2.35Ω
td(off) Turn-Off Delay Time — — 170
tfFall Time — — 130
LS + LDTotal Inductance — 4.0 —
Ciss Input Capacitance — 3700 — VGS = 0V, VDS = 25V
Coss Output Capacitance — 1100 — pF f = 1.0MHz
Crss Reverse Transfer Capacitance — 200 —
nA
Ω
➃
nH
ns
µA
Note: Corresponding Spice and Saber models are available on the G&S Website.
For footnotes refer to the last page
Thermal Resistance
Parameter Min Typ Max Units T est Conditions
RthJC Junction-to-Case — — 0.83
RthJ-PCB Junction-to-PC board — 3.0 — Soldered to a copper-clad PC board
°C/W
Source-Drain Diode Ratings and Characteristics
Parameter Min Typ Max Units T est Conditions
ISContinuous Source Current (Body Diode) — — 34
ISM Pulse Source Current (Body Diode) ➀— — 136
VSD Diode Forward Voltage — — 1.8 V Tj = 25°C, IS = 34A, VGS = 0V ➃
trr Reverse Recovery Time — — 500 nS Tj = 25°C, IF = 34A, di/dt ≤ 100A/µs
QRR Reverse Recovery Charge — — 2.9 µC VDD ≤ 30V ➃
ton Forward Turn-On Time Intrinsic tur n-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
A
Measured from the center of drain
pad to center of source pad.
Ω