NEW PRODUCT
NEW PRODUCT
Wire to Board Connector
LBT
LBTCONNECTOR
CONNECTOR A
ATYPE
TYPE
■General Specifications
・Temperature range
25℃〜+85℃(Including the temperature rise in
applying electrical current)
・Current rating
【Power supply】 5.0A (When using AWG#24)
【Power supply】 6.0A (When using AWG#22)
【Power supply】 7.0A (When using AWG#20)
【Signal】 0.5A (When using AWG#28)
・Voltage rating
50V
・Applicable wire
【Power supply】Wire range: AWG#24〜AWG#20
【Power supply】Insulation O.D.: φ1.11〜φ1.44
【Signal】Wire range: AWG#28
Insulation O.D.: φ0.60〜φ0.80
・Circuit No.
【Mass】 3circuits，5circuits ，7circuits，9circuits
・Part No.
【Base】SM(*)B-LBTAKS-TD-N2T-K(HF)
【Socket Housing】LBTAR-(*)V-2K-K(HF)
【Socket contact for power supply】SLBTAD-01T-M0.5
【Socket contact for signal】SSH-003T-P0.2-H
Note:Number of circuits is indicated in (*)
Example：
3circuits：SM03B-LBTAKS-TD-N2T-K(HF)
LBTAR-03V-2K-K(HF)
9circuits：SM09B-LBTAKS-TD-N2T-K(HF)
LBTAR-09V-2K-K(HF)
In order to connect to the lithium polymer ba ttery and DC IN,
the contacts for signal and the contacts for power supply are
clearly separated and the contact for power supply connects
to the counterpart earlier than the contact for signal.
Due to the structure to radiate heat, the low profile (space
saving type) connector to which the high current can be
applied is realiz ed.
■Features
・Low profile (Small size)
Height:3.0mm×Length(When mating):9.9mm
Width:3circuits 09.1mm
Width:5circuits 11.1mm
Width:7circuits 13.1mm
Width:9circuits 15.1mm
・Hybrid
3circuits:2-ways of power supply (both sides)
and 1-way of signal (center).
5circuits:2-ways of power supply (both sides)
and 3-way of signal (center).
7circuits:2-ways of power supply (both sides)
and 5-way of signal (center).
9circuits:2-ways of power supply (both sides)
and 7-way of signal (center).
・Structure to radiate heat (Patent pending)
The structure to radiate heat is designed for
header contact in order to decrease the heat filled
inside connector.
・Sequence
It is designed that the contacts for power supply
(both sides) connect to the counterpart earlier
than the contact for signal.
・High strength
Dipping type reinforcement tabs are installe d,
and the strength of fixing toPCB strengthened.
(Contacts for power supply and signal are SMT
type.)
・Prevention of insufficient mating
In order to avoid the insufficient mating, rib on
socket housing was designed
3circuit s Power supply 3.45mmPitch
5circuit s Power supply 5.45mmPitch
7circuit s Power supply 7.45mmPitch
9circuit s Power supply 9.45mmPitch
Signal 1.0mmPitch
JAN.29.2015 VER.4
