_______________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
MAX11103 Evaluation Kit
Evaluates: MAX11103
19-5728; Rev 0; 1/11
General Description
The MAX11103 evaluation kit (EV kit) is a fully assem-
bled and tested PCB that evaluates the MAX11103
2-channel, 12-bit, SPI™-compatible 3Msps analog-
to-digital converter (ADC). The EV kit also includes
Windows XP®, Windows Vista®, and Windows® 7-com-
patible software that provides a simple graphical user
interface (GUI) for exercising the features of the device.
The EV kit comes installed with a MAX11103AUB+ in a
10-pin FMAX® package with an exposed pad.
Features
S 48MHz SPI Interface
S Windows XP, Windows Vista, and Windows
7-Compatible Software
S Time Domain, Frequency Domain, and Histogram
Plotting in the EV Kit Software
S Frequency, RMS, Min, Max, and Average DC
Calculations in the EV Kit Software
S Collects Up to One Mega Samples
S On-Board Input Buffers
S USB-PC Connection
S Proven PCB Layout
S Fully Assembled and Tested
+Denotes lead(Pb)-free and RoHS compliant.
Ordering Information
Component List
SPI is a trademark of Motorola, Inc.
Windows, Windows XP, and Windows Vista are registered
trademarks of Microsoft Corp.
µMAX is a registered trademark of Maxim Integrated
Products, Inc.
PART TYPE
MAX11103EVKIT+ EV Kit
DESIGNATION QTY DESCRIPTION
AIN1_AC,
AIN1_DC,
AIN2_AC,
AIN2_DC,
CHSEL, CS,
DOUT, REF,
SCLK
9 White test points
AIN1_AC_SMA,
AIN1_DC_SMA,
AIN2_AC_SMA,
AIN2_DC_SMA,
10MHZCLK
550I SMA female jacks
AVDD, OP+,
OVDD, VIN 4 Red test points
BUTTON,
CPU_RESET,
RECONFIGURE
3 Pushbutton switches
DESIGNATION QTY DESCRIPTION
C1, C3 2
1000pF Q 10%, 50V X7R ceramic
capacitors (0603)
Murata GRM188R71H102K
C2, C4, C31,
C34, C36, C42,
C43, C47, C51,
C55–C72, C78,
C79, C80, C82,
C84, C86, C88,
C89, C90, C92,
C98, C99
39
0.1FF Q10%, 25V X7R ceramic
capacitors (0603)
Murata GRM188R71E104K
C5–C29 25
0.1FF Q10%, 16V X7R ceramic
capacitors (0402)
Murata GRM155R71C104K
C30, C35, C91,
C94, C95, C96,
CB1, CB2, CB3
9
1FF Q10%, 16V X7R ceramic
capacitors (0603)
Murata GRM188R71C105K
C32 1
0.01FF Q10%, 16V X7R ceramic
capacitor (0603)
Murata GRM188R71C103K
MAX11103 Evaluation Kit
Evaluates: MAX11103
2 ______________________________________________________________________________________
Component List (continued)
DESIGNATION QTY DESCRIPTION
C33, C38, C39,
C40, C97 5
4.7FF Q10%, 6.3V X5R ceramic
capacitors (0603)
Murata GRM188R60J475K
C37, C41, C44,
C45, C46, C48,
C50, C52, C87,
C73, C93, CP2,
CP3
13
10FF Q10%, 6.3V X5R ceramic
capacitors (0603)
Murata GRM188R60J106M
C49, C53, C74,
C100, C102,
C105, C106
0Not installed, ceramic capacitors
(0603)
C54, C101 0 Not installed, ceramic capacitors
(through hole)
C75, C76 2
18pF Q5%, 50V C0G ceramic
capacitors (0603)
Murata GRM1885C1H180J
C77, C81 2
10FF Q20%, 10V capacitors
(Tant B)
KEMET T491B106M010AT
C83, C85 2
4.7FF Q20%, 25V capacitors
(Tant B)
AVX TAJB475M025R
C103 1
10FF Q10%,10V X7R ceramic
capacitor (0805)
Murata GRM21BR71A106K
C104 0 Not installed, ceramic capacitor
(0805)
CC1–CC4 4
10pF Q5%, 50V C0G ceramic
capacitors (0603)
Murata GRM1885C1H100J
CP1 1
100FF Q20%, 6.3V X5R ceramic
capacitor (1210)
Murata GRM32ER60J107M
GND 9 Black test points
J1 0 Not installed, dual-row, 32-pin
(2 x 16) header
J2 1 USB type-B right-angle PC-mount
receptacle
JTAG1, JTAG2 0 Not installed, dual-row, 10-pin
(2 x 5) headers
DESIGNATION QTY DESCRIPTION
JU1–JU4,
JU10–JU16,
JU18, JU21
13 3-pin headers
JU5–JU8, JU17,
JU19, JU20,
JU22, JU23
9 2-pin headers
JUC1–JUC7 0 Not installed, headers—shorted
by PCB trace
L1 1 Ferrite bead (0603)
TDK MMZ1608R301A
L3 0 Not installed, inductor—shorted
by PCB trace
LED1–LED4 4 Red LEDs (0603)
OP- 1 Brown test point
R1, R2, R5, R6,
R7 5100kI Q5% resistors (0603)
R3, R4, R38,
R39, R40, R44,
R45, R47
81kI Q5% resistors (through hole)
R10, R33 2 22I Q5% resistors (0603)
R11–R21 11 5.1kI Q5% resistors (0603)
R22–R25, R28,
R34, R35, R41 810kI Q1% resistors (0603)
R26 1 16.5kI Q1% resistor (0603)
R27 1 4.42kI Q1% resistor (0603)
R29 1 20kI Q1% resistor (0603)
R30, RC1–RC7 8 10kI Q5% resistors (0603)
R31, R37, R46 0 Not installed, resistors (0603)
R32 1 12.1kI Q1% resistor (0603)
R36 1 0I Q5% resistor (0603)
R42, R43 2 10I Q1% resistors (0603)
RC8, RC9,
RC10 31kI Q5% resistors (0603)
RL1–RL4 4 120I Q5% resistors (0603)
RN14–RN21 8 22I, 8-pin SMT resistor networks
RN22 1 5.1kI, 8-pin SMT resistor network
RN25 1 10kI, 8-pin SMT resistor network
RSENSE1,
RSENSE2 20.1I Q1% 1/2W sensing resistors
(1206)
MAX11103 Evaluation Kit
Evaluates: MAX11103
_______________________________________________________________________________________ 3
Component List (continued)
Component Suppliers
MAX11103 EV Kit Files
Note: Indicate that you are using the MAX11103 when contacting these component suppliers.
SUPPLIER PHONE WEBSITE
Altera Corp. 800-800-3753 www.altera.com
AVX Corporation 843-946-0238 www.avxcorp.com
KEMET Corp. 864-963-6300 www.kemet.com
Murata Electronics North America, Inc. 770-436-1300 www.murata-northamerica.com
TDK Corp. 847-803-6100 www.component.tdk.com
FILE DESCRIPTION
INSTALL.EXE Installs the EV system files on your computer
MAX11103.EXE Application program
SLSUSB.DLL Software library file
SLSUSB.INF USB device driver file
SLSUSB.SYS USB device driver file
SLS_USB_Driver_Help_100.PDF USB driver installation file
DESIGNATION QTY DESCRIPTION
S1 1 4-position SMT half-pitch DIP
switch
U1 1
12-bit, 3Msps ADC
(10 FMAX-EP)
Maxim MAX11103AUB+
U2 1 Altera Cyclone III FPGA
Altera EP3C25F324C8N
U5 1 256Kx36 SSRAM (100 TQFP)
ISSI IS61LPS25636A-200TQLI
U6 0
Not installed, 32Mx16 Flash
(64 EBGA)
Numonyx/Intel PC28F256P30BFA
U7 1 EPCS16 (8 SO)
Altera EPCS16SI8N
U8, U20 2
Current-sense amplifiers
(8 FMAX)
Maxim MAX9929FAUA+
U9, U16 2 Op amps (5 SOT23)
Maxim MAX4430EUK+
DESIGNATION QTY DESCRIPTION
U10, U11, U12 3 LDOs (16 TSSOP-EP)
Maxim MAX1793EUE50+
U13 1 LDO (6 SOT23)
Maxim MAX1983EUT+
U14 1 SRAM (48 TSOP)
Cypress CY62167DV30LL-55ZXI
U15 1 USB PHY (SOT617-1)
ST Ericsson ISP1504ABS
U17 1 3V voltage reference (8 SO)
Maxim MAX6126AASA30+
U18, U19 2 Dual buffers (6 SC70)
Y1 1 50MHz oscillator
Y2 1 19.2MHz, 18pF SMD crystal
— 1 USB high-speed A-to-B cables,
6ft
— 22 Shunts
— 1 PCB: MAX11103 EVALUATION
KIT+
MAX11103 Evaluation Kit
Evaluates: MAX11103
4 ______________________________________________________________________________________
Quick Start
Required Equipment
• MAX11103EVkit
• 5.5V,500mADCpowersupply
• WindowsXP,WindowsVista,orWindows7PCwith
a spare USB port
• Functiongenerator
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and under-
lined refers to items from the Windows operating system.
Procedure
The EV kit is fully assembled and tested. Follow the
steps below to verify board operation. Caution: Do not
turn on the power supply until all connections are
completed.
1) Uncompress the 11103Rxx.ZIP file in a temporary
folder.
2) Install the EV kit software on your computer by run-
ning the INSTALL.EXE program inside the tempo-
rary folder. The program files are copied to your PC
and icons are created in the Windows All Programs
menu. During software installation, some versions
of Windows may show a warning message indicat-
ing that this software is from an unknown publisher.
This is not an error condition and it is safe to pro-
ceed with installation. Administrator privileges are
required to install the software on Windows.
3) Verify that all jumpers are in their default positions,
as shown in Table 1.
4) Connect the positive terminal of the 5.5V power
supply to the VIN connector on the board. Connect
the negative terminal of the same power supply to
the GND connector on the board.
5) Set the signal source to generate a 100kHz, 1V
peak-to-peak sinusoidal wave with 2V offset.
6) Connect the positive terminal of the signal gen-
erator to the AIN1_DC or AIN1_DC_SMA connector.
Connect the negative terminal of the signal genera-
tor to the GND connector.
7) Turn on the power supply.
8) Turn on the function generator.
9) Connect the USB cable from the PC to the
EV kit board. Follow the instructions on the
SLS_USB_Driver_Help_100.PDF file to manually
install the USB driver. Administrator privileges are
required to install the USB device driver on Windows.
10) Start the EV kit software by opening its icon in the
Windows All Programs menu. The EV kit software
main window appears, as shown in Figure 1.
11) The main window should display Hardware
Connected at the bottom-left corner
12) Check the Remove DC checkbox.
13) Press the Start Conversion button.
14)
Verify that the Frequency displayed in the Calculation
group box reads approximately 100000Hz.
Detailed Description of Software
The main window of the evaluation software
(Figure 1) contains a Device Configuration group box,
a Datalogging group box, and four tab sheets to display
the sampled data.
Device Configuration
Use the Channel Select drop-down list in the Device
Configuration group box to select the analog input
channel for analog-to-digital conversion.
Data Logging
In the Datalogging group box, the user can select
the desired number of conversions in the Number of
Samples drop-down list. Enter the desired sampling rate
in the Sample Rate (ksps) edit box. The actual sampling
rate is displayed at the right of the Sample Rate (ksps)
edit box. Press the Start Conversion button to start
sampling. After sampling is finished, the user can save
the data to a file by pressing the Save to File button.
The Save to File button is not active until the sampling
is done.
Time Domain, Frequency Domain,
Histogram, and Single Conversion Tabs
After the Start Conversion button in the Datalogging
group box is pressed, the sampled data in the time
domain is plotted in the Time Domain tab sheet. The
sampled data in the frequency domain is plotted in the
Frequency Domain tab sheet, and the histogram of the
sampled signal is plotted in the Histogram tab sheet.
MAX11103 Evaluation Kit
Evaluates: MAX11103
_______________________________________________________________________________________ 5
Figure 1. MAX11103 EV Kit Software Main Window
The Single Conversion tab sheet displays one sampled
data.
Check the Auto Convert checkbox to automatically
and repeatedly do the ADC conversions and update the
active tab sheet.
Time Domain Tab
In the Time Domain tab sheet (Figures 2a and 2b),
check the Remove DC check box to remove the DC
component of the sampled signal. In the Scope Display
Control Vertical group box, when the Auto Scale
checkbox is checked, the software automatically scales
the vertical axis in the plot. If the Auto Scale checkbox is
unchecked, enter the appropriate values into the Y-MAX
and Y-MIN edit boxes and press the Set button to set the
boundaries for the vertical axis. The software automati-
cally calculates the Frequency, RMS, MIN, MAX, and
Avg DC of the sampled signal and displays the calcu-
lated values in the Calculation group box.
Frequency Domain Tab
The Frequency Domain tab sheet (Figure 3) displays
the FFT plot of the signal shown in the Time Domain tab
sheet.
MAX11103 Evaluation Kit
Evaluates: MAX11103
6 ______________________________________________________________________________________
Figure 2a. Time Domain Tab
MAX11103 Evaluation Kit
Evaluates: MAX11103
_______________________________________________________________________________________ 7
Figure 2b. Time Domain Tab (Zoomed In)
MAX11103 Evaluation Kit
Evaluates: MAX11103
8 ______________________________________________________________________________________
Histogram Tab
The Histogram tab sheet (Figure 4) displays the histo-
gram of the signal shown in the Time Domain tab sheet.
The software automatically calculates the Mean and the
Std Dev (standard deviation, sigma) and displays the
calculated values in the Calculation group box.
The Histogram Display Control radio group box pro-
vides three options to scale the horizontal axis on the
histogram:
1) (Mean - 3 sigma) to (Mean + 3 sigma)
2) (Mean - 6 sigma) to (Mean + 6 sigma)
3) User Define range
Single Conversion
The ADC Value Display group box in the Single
Conversion tab sheet (Figure 5) displays the ADC Code
and calculated Voltage values for a single sample. Press
the Start Conversion button in the Datalogging group
box to update the status of the ADC Value Display
group box.
Figure 3. Frequency Domain Tab
MAX11103 Evaluation Kit
Evaluates: MAX11103
_______________________________________________________________________________________ 9
Figure 4. Histogram Tab
MAX11103 Evaluation Kit
Evaluates: MAX11103
10 _____________________________________________________________________________________
Figure 5. Single Conversion Tab
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 11
Detailed Description of Hardware
The MAX11103 EV kit is a fully assembled and tested
PCB that evaluates the MAX11103 2-channel, 12-bit,
SPI-compatible 3Msps ADC. The EV kit comes installed
with a MAX11103AUB+ in a 10-pin FMAX package with
an exposed pad.
Power Supply
A 5.5V power supply is required to power up the EV kit.
Connect the positive terminal of the power supply to the
VIN connector and the negative terminal to the GND
connector.
On-Board Input Buffer
On-board input buffers (U9 and U16) are provided on
the EV kit. To power the on-board buffer, connect the
+5V, GND, and -5V terminals of the power supply to the
OP+, GND, and OP- connectors, respectively.
Analog Input 1
Move the shunt on jumper JU18 to the 2-3 position and
remove the shunts on jumpers JU19 and JU20. The
user can connect the AC signal to the AIN1_AC_SMA
or AIN1_AC connector and connect the DC offset to the
AIN1_DC_SMA or AIN1_DC connector. If the measur-
ing signal has already been shifted above the ground
level, short the AC input to ground by installing a shunt
on JU19 and connecting the measuring signal to the
AIN1_DC_SMA or AIN1_DC connector. To bypass the
buffer and connect the measuring signal directly to the
AIN1 input of the ADC, move the shunt on JU18 to the
1-2 position. Then connect the measuring signal to the
AIN1_DC_SMA or AIN1_DC connector.
Analog Input 2
Move the shunt on jumper JU21 to the 2-3 position and
remove the shunts on jumpers JU22 and JU23.
The
user can connect the AC signal to the AIN2_AC_SMA
or
AIN2_AC connector and connect the DC offset to the
AIN2_DC_SMA or AIN2_DC connector. If the measuring
signal has already been shifted above the ground level,
short the AC input to ground by installing a shunt on
JU23 and connect the measuring signal to the AIN2_
DC_SMA or AIN2_DC connector. To bypass the buffer
and connect the measuring signal directly to the AIN2
input of the ADC, move the shunt on JU21 to the 1-2
position. Finally, connect the measuring signal to the
AIN2_DC_SMA or AIN2_DC connector.
User-Supplied SPI Interface
For a user-supplied SPI interface, first move the shunts
on jumpers JU12–JU15 to the 2-3 position and connect
the user-supplied CS, SCLK, CHSEL, and MISO signals
to the corresponding CS, SCLK, CHSEL, and DOUT
connectors on the EV kit.
Table 1. Jumper Settings (JU1–JU8, JU10–JU23)
JUMPER SHUNT
POSITION DESCRIPTION
JU1 1-2 Connects the USB power to the input of the on-board LDO (U10).
2-3* Connects the external power supply to the input of the on-board LDO (U10).
JU2 1-2 Connects the USB power to the input of the on-board LDO (U11).
2-3* Connects the external power supply to the input of the on-board LDO (U11).
JU3 1-2 Connects the USB power to the input of the on-board LDO (U12).
2-3* Connects the external power supply to the input of the on-board LDO (U12).
JU4 1-2 Connects the USB power to the input of the on-board LDO (U13).
2-3* Connects the external power supply to the input of the on-board LDO (U13).
JU5 1-2* The on-board LDO (U10) provides 3.3V output to the EV kit.
Open Disconnects the output of the on-board LDO (U10).
JU6 1-2* The on-board LDO (U11) provides 1.8V output to the EV kit.
Open Disconnects the output of the on-board LDO (U11).
JU7 1-2* The on-board LDO (U12) provides 2.5V output to the EV kit.
Open Disconnects the output of the on-board LDO (U12).
JU8 1-2* The on-board LDO (U13) provides 1.2V output to the EV kit.
Open Disconnects the output of the on-board LDO (U13).
MAX11103 Evaluation Kit
Evaluates: MAX11103
12 _____________________________________________________________________________________
*Default position.
Table 1. Jumper Settings (continued)
JUMPER SHUNT
POSITION DESCRIPTION
JU10 1-2* Connects the OVDD input of the ADC (U1) to the output of the on-board 3.3V LDO.
2-3 Connects the OVDD input of the ADC (U1) to the OVDD connector.
JU11 1-2* Connects the output of U17 (3.0V) to the REF input of the device.
2-3 Connects the REF pin of the ADC (U1) to the REF connector.
JU12 1-2* Connects the SCLK signal of the ADC (U1) to the FPGA.
2-3 Connects the SCLK signal of the ADC (U1) to the SCLK connector.
JU13 1-2* Connects the DOUT signal of the ADC (U1) to the FPGA.
2-3 Connects the DOUT signal of the ADC (U1) to the DOUT connector.
JU14 1-2* Connects the CS signal of the ADC (U1) to the FPGA.
2-3 Connects the CS signal of the ADC (U1) to the CS connector.
JU15 1-2* Connects the CHSEL signal of the ADC (U1) to the FPGA.
2-3 Connects the CHSEL signal of the ADC (U1) to the CHSEL connector.
JU16 1-2* Connects the AVDD input of the ADC (U1) to the output of the on-board 3.3V LDO.
2-3 Connects the AVDD input of the ADC (U1) to the AVDD connector.
JU17 1-2 Connects OP- to GND. Use this jumper if the negative supply is not available.
Open* Disconnects OP- from GND.
JU18 1-2* Bypasses the on-board input buffer. Connects the AIN1_DC_SMA or the AIN1_DC connector to the
AIN1 input of the ADC (U1).
2-3 Connects the AIN1 input of the ADC (U1) to the output of the on-board buffer (U9).
JU19
1-2 Shorts the AC signal input to GND.
Open* Connects the signal from the AIN1_AC_SMA connector to the inverting input of the on-board buffer
(U9) through a 1kI resistor.
JU20
1-2 Shorts the DC signal input to GND.
Open* Connects the signal from the AIN1_DC_SMA connector to the noninverting input of the on-board
buffer (U9) through a 1kI resistor.
JU21 1-2* Bypassing the on-board input buffer. Connects the AIN2_DC_SMA or the AIN2_DC connector to the
AIN2 input of the ADC (U1).
2-3 Connects the AIN2 input of the ADC (U1) to the output of the on-board buffer (U16).
JU22
1-2 Shorts the DC signal input to GND.
Open* Connects the signal from the AIN2_DC_SMA connector to the noninverting input of the on-board
buffer (U16) through a 1kI resistor.
JU23
1-2 Shorts the AC signal input to GND.
Open* Connects the signal from the AIN2_AC_SMA connector to the inverting input of the on-board buffer
(U16) through a 1kI resistor.
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 13
Figure 6a. MAX11103 EV Kit Schematic (Sheet 1 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
14 _____________________________________________________________________________________
Figure 6b. MAX11103 EV Kit Schematic (Sheet 2 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 15
Figure 6c. MAX11103 EV Kit Schematic (Sheet 3 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
16 _____________________________________________________________________________________
Figure 6d. MAX11103 EV Kit Schematic (Sheet 4 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 17
Figure 6e. MAX11103 EV Kit Schematic (Sheet 5 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
18 _____________________________________________________________________________________
Figure 6f. MAX11103 EV Kit Schematic (Sheet 6 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 19
Figure 6g. MAX11103 EV Kit Schematic (Sheet 7 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
20 _____________________________________________________________________________________
Figure 6h. MAX11103 EV Kit Schematic (Sheet 8 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 21
Figure 6i. MAX11103 EV Kit Schematic (Sheet 9 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
22 _____________________________________________________________________________________
Figure 6j. MAX11103 EV Kit Schematic (Sheet 10 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 23
Figure 6k. MAX11103 EV Kit Schematic (Sheet 11 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
24 _____________________________________________________________________________________
Figure 6l. MAX11103 EV Kit Schematic (Sheet 12 of 12)
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 25
Figure 7. MAX11103 EV Kit Component Placement Guide—Top
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
26 _____________________________________________________________________________________
Figure 8. MAX11103 EV Kit PCB Layout—Component Side
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 27
Figure 9. MAX11103 EV Kit PCB Layout—Layer 2
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
28 _____________________________________________________________________________________
Figure 10. MAX11103 EV Kit PCB Layout—Layer 3
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 29
Figure 11. MAX11103 EV Kit PCB Layout—Layer 4
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
30 _____________________________________________________________________________________
Figure 12. MAX11103 EV Kit PCB Layout—Layer 5
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 31
Figure 13. MAX11103 EV Kit PCB Layout—Layer 6
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
32 _____________________________________________________________________________________
Figure 14. MAX11103 EV Kit PCB Layout—Layer 7
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 33
Figure 15. MAX11103 EV Kit PCB Layout—Layer 8
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
34 _____________________________________________________________________________________
Figure 16. MAX11103 EV Kit PCB Layout—Layer 9
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 35
Figure 17. MAX11103 EV Kit PCB Layout—Layer 10
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
36 _____________________________________________________________________________________
Figure 18. MAX11103 EV Kit PCB Layout—Layer 11
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
______________________________________________________________________________________ 37
Figure 19. MAX11103 EV Kit PCB Layout— Bottom Side
1.0”
MAX11103 Evaluation Kit
Evaluates: MAX11103
38 _____________________________________________________________________________________
Figure 20. MAX11103 EV Kit Component Placement Guide—Bottom
1.0”
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 39
© 2011 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX11103 Evaluation Kit
Evaluates: MAX11103
Revision History
REVISION
NUMBER
REVISION
DATE DESCRIPTION PAGES
CHANGED
0 1/11 Initial release —
