M55342K06B976DP - State of the Art, Inc.

M55342/06 Thin Film Chip Resistor

0705 Size, Surface Mount, Solderable

STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797

Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401

Where Quality Isn't a Goal...It's Our Tradition

PROTECTIVE

ENCAPSULANT

WRAPAROUND

TERMINATIONS

PRETINNED

99.6% ALUMINA CHIP

PRECISION

THIN FILM

RESISTOR

FEATURES

• Tolerances to ± 0.1%

• Operating temperature range :

-55 C to +150 C

• Pretinned (Sn60) nickel barrier

terminations

°°

• TCR's to ± 25 ppm

• Suitable for solder reflow, vapor

phase, or wave solder attachment

PERFORMANCE CHARACTERISTICS

TYPICAL LIFE TEST PERFORMANCE

CURRENT NOISE

POWER DERATING

Resistance Range 5.6 - 1M

Tolerances 0.1%,1%, 2%, 5%,10%

Maximum Power 100 mW

Maximum Voltage 50 Volts

TCR (-55 to +125 C in ppm/ C)

Thermal Shock

Low Temperature Operation

Short-time Overload

Resistance to Bonding Exposure

Moisture Resistance

High Temperature Exposure

Life

°°

<25ppm

±0.02%

±0.03%

See Chart

(1) Resistance range for 0.1% tolerance is 100 ohms to 1 M

ohm.

(2) Maximum Power for E and H TCR is 50 mW.

(3) Typical Resistance change, the maximum is the same as

MIL-PRF-55342. Test methods are per MIL-PRF-55342.

Solderability: Solder coating compatible with Sn60, 62 or

63 solders, provides good wetting with all types of solder

attachment. All product is tested IAW Mil-Std-202,

method 208, including 8 hour steam aging.

PART NUMBERING

M55342 H 06B 100D R

PRODUCT LEVEL DESIGNATOR*

M: 1% per 1000 hrs. R: 0.01% per 1000 hrs.

P: 0.1% per 1000 hrs T: Space Level

C: Non - ER

TCR

E: ±25 ppm H: ±50 ppm K: ±100 ppm

All product levels are based on the same design as our "R" level failure rate Established

Reliability part. Level C is a Non-Established Reliability part requiring no group A, B or C

testing. Established Reliability (failure rates based on life testing) product levels M,P, and R

are subject to group A, B and C testing per MIL-PRF-55342. Space product level T requires

group Aand B tests including 100% power conditioning.

* PRODUCT LEVELS

RESISTANCE AND TOLERANCE CODE

Three significant digits, with a letter indicating the

decimal location, and the tolerance, and the value range

(,K,M)

A: 0.1% D: 1% G: 2% J: 5% M: 10%

B: 0.1%K E: 1%K H: 2%K K: 5%K N: 10%K

C: 0.1%M F: 1%M T: 2%M L: 5%M P: 10%M

WW W

WWWW W

WW W W W

Two packaging options are available:

Waffle Pack - (170 per Tray Max.)

Tape & Reel - (5000 per 8" Inch Reel Max.)

PACKAGING

OPTIONS

Termination type wraparound style (pretinned with a Ni barrier),

and type W (wire bondable) are available. Also available in

thick film MIL-PRF-55342 characteristic K & M. SOTA offers a

full line of component parts in the 0705 size including Standard

Grade, High-Reliability (customer specified testing), and zero-

ohm jumpers. Custom part marking is also available.

10/01/97

MECHANICAL

INCHES

.080 (+.006/-.006)

.050 (±.005)

.015 - .033

.010 - .020

.0045 grams

Length

Width

Thickness

Top Term.

Bottom Term.

Approx. Weight

2.03 (+.15/-.15)

1.27 (±.13)

.38 - .84

.25 - .51

ENVIRONMENTAL PERFORMANCE (3)

POWER DISSIPATION