CE DF005S THRU DF10S
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.0A
FEATURES
For surface mount application
Reliable low cost construction utilizing molded plastic
technique
Surge overload rating: 50A peak
MECHANICAL DATA
. Terminal: Plated leads solderable per
MIL-STD 202E, method 208C
. Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
. Polarity: Polarity symbol marked on body
. Mounting position: any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Single-phase, half-wave, 60HZ, resistive or inductive load rating at 25 , unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL DF005S DF01S DF02S DF04S DF06S DF08S DF10S units
Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 400 600 800 1000 v
Maximum RMS Voltage Vrms 35 70 140 280 420 560 700 v
Maximum DC blocking Voltage Vdc 50 100 200 400 600 800 1000 v
Maximum Average Forward Rectified
current at Ta=40 If(av) A
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load Ifsm A
Maximum Instantaneous Forward Voltage at
forward current 1.0A Vf V
Maximum DC Reverse Voltage Ta=25 A
at rated DC blocking voltage Ta=125 Ir mA
Typical Junction Capacitance Cj pF
Operating Temperature Range Tj
Storage and operation Junction Temperature Tstg
Note:
1. Measure at 1MHZ and applied reverse voltage of 4.0 volt
500
25
-55 to +125
-55 to +150
1
50
1.1
10.0
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2
CE DF005S THRU DF10S
CHENYI ELECTRONICS SINGLE PHASE GLASS
PASSIVATED SURFACE MOUNT BRIDGE RECTIFIER
Voltage: 50 TO 1000V CURRENT:1.0A
RATINGS AND CHARACTERISTIC CURVES DF005S THRU DF10S
FIG.1-MAXIMUM NON-REPETITIVE FORWARD FIG.2-TYPICAL FORWARD CURRENT
SURGE CURRENT DERATING CURVE
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2
