BC307B Amplifier Transistors PNP Silicon Features * This is a Pb-Free Device* http://onsemi.com COLLECTOR 1 MAXIMUM RATINGS Rating Symbol Value Unit Collector - Emitter Voltage VCEO -45 Vdc Collector - Base Voltage VCBO -50 Vdc VEBO -5.0 Vdc Collector Current - Continuous IC -100 mAdc Total Device Dissipation @ TA = 25C Derate above 25C PD 350 2.8 mW mW/C Total Device Dissipation @ TC = 25C Derate above 25C PD 1.0 8.0 W mW/C TJ, Tstg -55 to +150 C Emitter - Base Voltage Operating and Storage Junction Temperature Range THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction-to-Ambient RqJA 357 C/W Thermal Resistance, Junction-to-Case RqJC 125 C/W 2 BASE 3 EMITTER 1 TO-92 CASE 29 STYLE 17 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAM Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. BC30 7B AYWW G G A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device BC307BRL1G *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2011 May, 2011 - Rev. 5 1 Package Shipping TO-92 (Pb-Free) 2000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: BC307/D BC307B ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Collector -Emitter Breakdown Voltage (IC = -2.0 mAdc, IB = 0) V(BR)CEO -45 - - Vdc Emitter -Base Breakdown Voltage (IE = -100 mAdc, IC = 0) V(BR)EBO -5.0 - - Vdc - - -0.2 -0.2 -15 -4.0 nAdc mA - 200 - 150 290 180 - 460 - - - - -0.10 -0.30 -0.25 -0.3 -0.6 - - - -0.7 -1.0 - - OFF CHARACTERISTICS Collector-Emitter Leakage Current (VCES = -50 V, VBE = 0) (VCES = -50 V, VBE = 0) TA = 125C ICES ON CHARACTERISTICS DC Current Gain (IC = -10 mAdc, VCE = -5.0 Vdc) (IC = -2.0 mAdc, VCE = -5.0 Vdc) (IC = -100 mAdc, VCE = -5.0 Vdc) hFE Collector -Emitter Saturation Voltage (IC = -10 mAdc, IB = -0.5 mAdc) (IC = -10 mAdc, IB = see Note 1) (IC = -100 mAdc, IB = -5.0 mAdc) VCE(sat) Base -Emitter Saturation Voltage (IC = -10 mAdc, IB = -0.5 mAdc) (IC = -100 mAdc, IB = -5.0 mAdc) VBE(sat) Base-Emitter On Voltage (IC = -2.0 mAdc, VCE = -5.0 Vdc) VBE(on) -0.55 -0.62 -0.7 Vdc fT - 280 - MHz Ccbo - - 6.0 pF NF - 2.0 10 dB - Vdc Vdc DYNAMIC CHARACTERISTICS Current -Gain - Bandwidth Product (IC = -10 mAdc, VCE = -5.0 Vdc, f = 100 MHz) Common Base Capacitance (VCB = -10 Vdc, IC = 0, f = 1.0 MHz) Noise Figure (IC = -0.2 mAdc, VCE = -5.0 Vdc, RS = 2.0 kW, f = 1.0 kHz) 1. IC = -10 mAdc on the constant base current characteristic, which yields the point IC = -11 mAdc, VCE = -1.0 V. http://onsemi.com 2 BC307B TYPICAL CHARACTERISTICS -1.0 VCE = -10 V TA = 25C 1.5 -0.9 1.0 0.7 0.5 -0.7 VBE(on) @ VCE = -10 V -0.6 -0.5 -0.4 -0.3 VCE(sat) @ IC/IB = 10 -0.1 0 -0.1 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -50 -100 -200 IC, COLLECTOR CURRENT (mAdc) Figure 1. Normalized DC Current Gain -0.5 -1.0 -2.0 -5.0 -10 -20 IC, COLLECTOR CURRENT (mAdc) -50 -100 Figure 2. "Saturation" and "On" Voltages 10 400 300 Cib 7.0 200 C, CAPACITANCE (pF) f T, CURRENT-GAIN -- BANDWIDTH PRODUCT (MHz) VBE(sat) @ IC/IB = 10 -0.2 0.3 0.2 -0.2 VCE = -10 V TA = 25C 150 100 80 60 5.0 TA = 25C 3.0 Cob 2.0 40 30 20 -0.5 -1.0 -2.0 -3.0 -5.0 -10 -20 -30 IC, COLLECTOR CURRENT (mAdc) 1.0 -0.4 -0.6 -50 Figure 3. Current-Gain -- Bandwidth Product 0.3 r b, BASE SPREADING RESISTANCE (OHMS) 0.5 VCE = -10 V f = 1.0 kHz TA = 25C 0.1 0.05 0.03 0.01 -0.1 -0.2 -0.5 -1.0 -2.0 IC, COLLECTOR CURRENT (mAdc) -5.0 -1.0 -2.0 -4.0 -6.0 -10 VR, REVERSE VOLTAGE (VOLTS) -20 -30 -40 Figure 4. Capacitances 1.0 hob, OUTPUT ADMITTANCE (OHMS) TA = 25C -0.8 V, VOLTAGE (VOLTS) hFE, NORMALIZED DC CURRENT GAIN 2.0 150 140 130 120 110 100 -0.1 -10 VCE = -10 V f = 1.0 kHz TA = 25C Figure 5. Output Admittance -0.2 -0.3 -0.5 -1.0 -2.0 -3.0 IC, COLLECTOR CURRENT (mAdc) -5.0 Figure 6. Base Spreading Resistance http://onsemi.com 3 -10 BC307B PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AM A R NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B P T SEATING PLANE G K D X X J V 1 C N SECTION X-X DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --2.04 2.66 1.50 4.00 2.93 --3.43 --- STYLE 17: PIN 1. COLLECTOR 2. BASE 3. EMITTER ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BC307/D