Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-73 –
010
Sleeve
14 min.
3 min.
L=
=L16 : L±1.5
L20 : L±2.0
Pressure relief +
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
● Low impedance (10 % to 30 % less than FC Se ries)
Miniaturization (30 % to 40 % less than FC Series)
● Endurance : 3000 h to 5000 h at +105 °C
● AEC-Q200 qualifi ed✽
● RoHS directive compliant
Radial Lead Type
Series: FK Type: A
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 35 V.DC
Nominal Cap. Range 180 μF to 12000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV (μA) After 2 minutes
tan d
W.V. 6.3 10 16 25 35
tan d0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 °C)
Add 0.02 per 1000 μF for products of 1000 μF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed bellow.
Duration : 08: 3000 hours , 010: 4000 hours , 012.5 to 018: 5000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 35
180 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 12000 0.75 0.80 0.95 1.00 1.00
■ Frequency correction factor for ripple current
Body Dia. fD810 12.5 1618
Body Length L — — 12.5 to 25 30 to 40 — —
Lead Dia. fd 0.6 0.6 0.6 0.8 0.8 0.8
Lead space F 3.5 5.0 5.0 5.0 7.5 7.5
■ Di men sions in mm (not to scale) (Unit : mm)
✽ This product qualify for AEC-Q200, but it has some deviations.
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-74 –
■ Case size/Impedance/Ripple current
Case size
(0D×L)
Imped ance
(Ω)/(100 kHz)
Ripple Current
(mA r.m.s.)/(100 kHz)
+20 °C –10 °C +105 °C
8 × 11.5 0.090 0.180 630
8 × 15 0.062 0.124 860
8 × 20 0.044 0.088 1220
10 × 12.5 0.063 0.126 900
10 × 16 0.049 0.098 1240
10 × 20 0.035 0.070 1490
10 × 25 0.033 0.066 1680
10 × 30 0.025 0.050 2140
12.5 × 15 0.048 0.096 1400
12.5 × 20 0.029 0.058 1890
12.5 × 25 0.022 0.044 2280
12.5 × 30 0.018 0.036 2720
12.5 × 35 0.016 0.032 2940
12.5 × 40 0.014 0.028 3010
16 × 15 0.038 0.076 1800
16 × 20 0.026 0.052 2330
16 × 25 0.019 0.038 2760
18 × 15 0.036 0.072 2060
18 × 20 0.025 0.050 2640
18 × 25 0.018 0.036 2850
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-75 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C
)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (pcs) (pcs)
6.3
680 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK0J681( ) 200 1000
1000 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK0J102L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK0J102( ) 200 500
1500 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK0J152L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK0J152( ) 200 500
1800 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK0J182S( ) 200 500
2200 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK0J222( ) 200 500
10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK0J222L( ) 200 500
3300
10 30 2140 0.025 4000 0.6 5.0 EEUFK0J332L 100
12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK0J332( ) 200 500
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK0J332S( ) 100 250
4700 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK0J472( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK0J472S( ) 100 250
5600 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK0J562L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK0J562S( ) 100 250
6800 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK0J682L 100
8200
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK0J822L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK0J822( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK0J822S( ) 100 250
12000 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK0J123S( ) 100 250
10
560 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1A561( ) 200 1000
820 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1A821L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1A821( ) 200 500
1200 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1A122L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1A122( ) 200 500
1500 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1A152S( ) 200 500
1800 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1A182( ) 200 500
10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1A182L( ) 200 500
2700
10 30 2140 0.025 4000 0.6 5.0 EEUFK1A272L 100
12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1A272( ) 200 500
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1A272S( ) 100 250
3900 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1A392( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1A392S( ) 100 250
4700 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1A472L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1A472S( ) 100 250
5600 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1A562L 100
6800
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1A682L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1A682( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1A682S( ) 100 250
8200 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1A822S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-76 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C
)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (pcs) (pcs)
16
390 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1C391( ) 200 1000
680 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1C681L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1C681( ) 200 500
820 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1C821L( ) 200 1000
1000 10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1C102( ) 200 500
1200 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1C122( ) 200 500
12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1C122S( ) 200 500
1500 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1C152L( ) 200 500
2200
10 30 2140 0.025 4000 0.6 5.0 EEUFK1C222L 100
12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1C222( ) 200 500
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1C222S( ) 100 250
2700 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1C272( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1C272S( ) 100 250
3300 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1C332L 100
3900 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1C392L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1C392S( ) 100 250
4700 12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1C472L 100
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1C472S( ) 100 250
5600 16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1C562( ) 100 250
6800 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1C682S( ) 100 250
25
270 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1E271( ) 200 1000
390 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1E391L( ) 200 1000
470 10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1E471( ) 200 500
560 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1E561L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1E561( ) 200 500
820 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1E821( ) 200 500
12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1E821S( ) 200 500
1000 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1E102L( ) 200 500
1200 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1E122( ) 200 500
1500 10 30 2140 0.025 4000 0.6 5.0 EEUFK1E152L 100
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1E152S( ) 100 250
1800 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1E182( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1E182S( ) 100 250
2200 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1E222L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1E222S( ) 100 250
2700 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1E272L 100
3300
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1E332L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1E332( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1E332S( ) 100 250
4700 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1E472S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-77 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C
)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (pcs) (pcs)
35
180 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1V181( ) 200 1000
270 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1V271L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1V271( ) 200 500
390 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1V391L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1V391( ) 200 500
560 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1V561( ) 200 500
12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1V561S( ) 200 500
680 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1V681L( ) 200 500
820 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1V821( ) 200 500
1000 10 30 2140 0.025 4000 0.6 5.0 EEUFK1V102L 100
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1V102S( ) 100 250
1200 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1V122( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1V122S( ) 100 250
1500 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1V152L 100
1800 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1V182L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1V182S( ) 100 250
2200
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1V222L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1V222( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1V222S( ) 100 250
3300 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1V332S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
01 May. 2014
