TSW-103-07-F-D - Samtec Inc.

DO NOT

SCALE FROM

THIS PRINT

OPTION #1

-BLANK= STRAIGHT

-RA= RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5)

-RE= EXTENDED RIGHT ANGLE (SEE TABLE 3 & 5, FIG 5)(SINGLE ROW ONLY)

-NA= RA OPTION WITH STRAIGHT OPTION BODY

-NE= RE OPTION WITH STRAIGHT OPTION BODY

-LC= LOCKING CLIP (USE LTC-01 FOR -S ROW AND

LTC-02 FOR -D ROW)(STYLES 08 THRU 13 & 22 ONLY) (SEE FIG 2)

(N/A IN -RA OR -RE OPTION AND/OR LESS THAN 4 POSITIONS)

(N/A IN -T OR -Q)

-LA= -RA OPTION WITH -LL OPTION (SEE FIG 5)

-LL= LOCKING LEAD (SEE FIG 4)

(N/A WITH -RE OR -NE OPTION)

(N/A IN SINGLE ROW, 1 OR 2 POSITIONS)

TERMINAL SPECIFICATION

SEE TABLE 1

OPTION #2

-POLARIZING SPECIFICATION

XXX INDICATES POS. TO BE OMITTED (SEE FIG 3)

-1: -01 THRU -50 (-S, -D, -T)

"A" = NO. OF POS. x .100[2.54]

-2: -02 THRU -25 (-S, -D, -T)

"A" = NO OF POS. x .200[5.08] - .100[2.54]

BODY LENGTH SPEC.

EXPRESSED IN # OF POS

(SEE ASSEMBLY INSTRUCTIONS)

-1=.100[2.54] FILL EVERY POSITION

-2= .200[5.08] FILL EVERY OTHER POS.

STARTING W/ 1ST & ENDING

W/ LAST POS. IN BODY)

TERMINAL SPACE SPEC.

ROW SPECIFICATION (SEE TABLE 2)

-S: SINGLE

-D: DOUBLE

-T: TRIPLE

-Q: TRIPLE ROW, FILL OUTER ROWS ONLY

PLATING SPECIFICATION

-G: 10µ" GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL

-T: MATTE TIN CONTACT AND TAIL

-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL

-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-F: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-E: 50µ" EXTRA HEAVY GOLD IN CONTACT AREA, 3µ" GOLD ON TAIL

-TL: TIN/LEAD (90/10 +/-5%) CONTACT AND TAIL

(AVAILABLE ONLY ON LEAD STYLES -07, -08 & -09)

-STL: 30µ" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10 +/-5%) TAIL

(AVAILABLE ONLY ON LEAD STYLES -07, -08, -10, -15, -16, -17, -21, -23 & -24

THROUGH HOLE ONLY)

-TM: MATTE TIN CONTACT AND TAIL

-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL

-SS: 30µ" STRIPE SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL (SEE NOTE 13)

TSW-XXX-XX-XXX-X-XX-XXX

NOTES:

REPRESENTS CRITICAL DIMENSION.

2. MINIMUM TERMINAL PUSHOUT: 3 LBS.

3. MAXIMUM HEIGHT VARIATION: .005 [.13](R.A. TAIL N/A).

4. ASSEMBLE GOLD PLATE END AS SHOWN.

5. STYLE -26: ROUND END TO APPEAR ON BOTTOM.

6. 'C'± FOR STYLE -08, OPTION -LA & -RA ONLY.

7. TOW & SWAY SPEC. OF 2° APPLIES TO ALL

POSITIONS, POST & TAIL, IN ALL DIRECTIONS.

8. ALL DIMENSIONS TO BE ABOUT CL WITHIN ±.005 [.13].

MEASURE FROM THE BEND RADIUS OF THE TERMINALS .

10. TSW-50-D BODY CAN BE USED IF RTSW-50-D IS UNAVAILABLE

11. ORIENTATE PINS TO PREVENT BANDOLIER MARKS FROM SHOWING

IN THE POST AREA. (SEE TABLE 7)

12. MAXIMUM CUT FLASH: .020 [.50]

13. -SS OPTION ONLY AVAILABLE IN STRAIGHT LEAD STYLES -07, -08 &

-09, -RA STYLE -08 ONLY. CAN ONLY MATE WITH SSW, SSQ, SSM,

ESW, ESQ AND BCS.

SHEET OF

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DECIMALS ANGLES

.XX:

.01 [.3] 2

.XXX:

.005 [.13]

.XXXX:

.0020 [.051]

MATERIAL:

.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY

BY:

TSW-XXX-XX-XXX-X-XX-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

08/24/1988

SHEET SCALE: 3:1

c:\enterprisevault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW

BODIES: DUPONT PBT, UL 94 VO, COLOR: BLACK

TERMINALS: PHOS BRONZE

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

REVISION DG

"C"

±.008[0.20]

(SEE TABLE 1, SHT 6)

(SEE NOTE 3 AND 6)

"L"

(SEE TABLE 4, SHT 5)

.100 2.54

REF

MAX SWAY

(EITHER DIRECTION)

MAX SWAY

(EITHER DIRECTION)

SEE NOTE 5

"A"

.010

.015

(SEE CALLOUT)

-1XX=.100[2.54]

-2XX=.200[5.08]

0.38

0.25

[ ]

.100 2.54

REF

MAX SWAY

(EITHER DIRECTION)

MAX SWAY

(EITHER DIRECTION)

.200 5.08

.300 7.62

REF

.100 2.54

.200 5.08

REF

.100 2.54

.300 7.62

REF

.200 5.08

.596 15.15

REF

"F"

"G"

REF

-D

-T

-Q

FIG 2

(TSW-1XX-XX-XX-S-LC SHOWN)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

-S

FIG 1

(TSW-1XX-XX-XX-S SHOWN)

SHEET OF

.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY

BY:

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

08/24/1988

SHEET SCALE: 3:1

REVISION DG

c:\enterprisevault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

TSW-XXX-XX-XXX-X-XX-XXX

.04 1.0

LTC-01 LTC-02

SEE CRIMP DETAIL

.008 0.20

(TYP)

.031 0.79

MIN

CRIMP DETAIL

SCALE: 4:1

(TYP ALL CRIMPS)

SINGLES

DOUBLES

TRIPLES

-Q:

(FILL OUTER ROWS ONLY)

-Q:

(FILL OUTER ROWS ONLY)

FIG 3

-1: .100[2.54] TERMINAL SPACING

(SAME AS FIG 1, DIFFERENT AS SHOWN)

-2: .200[5.08] TERMINAL SPACING

FIG 4

LOCKING LEAD

(NOTE: END VIEWS SHOWN)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

SINGLE

-LC-LL

DOUBLE

-LC-LL

SINGLE STRAIGHT

-LL

DOUBLE STRAIGHT

-LL

TRIPLE STRAIGHT

-LL

SINGLES SINGLES

DOUBLES DOUBLES

DOUBLESDOUBLES

TRIPLES TRIPLES

TRIPLESTRIPLES

SINGLES SINGLES

STRAIGHT VERSION

ODD POSITIONS

STRAIGHT VERSION

EVEN POSITIONS

RIGHT ANGLE VERSION

EVEN POSITIONS

RIGHT ANGLE VERSION

ODD POSITIONS

LOCKING LEAD

= CRIMP LOCATION

TWO CENTER MOST PINS TO BE CRIMPED.

ODD POSITIONS, CRIMP CENTER POSITION AND POSITION CLOSEST TO PIN ONE.

IF CRIMP POSITION IS POLARIZED, MOVE ONE POSITION TOWARDS PIN ONE.

01 01

02 03

5049

99 100 150

73 75

148

148 150

73 75

SHEET OF

.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY

BY:

TSW-XXX-XX-XXX-X-XX-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

08/24/1988

SHEET SCALE: 2:1

REVISION DG

c:\enterprisevault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

"D"

(SEE TABLE 3)

.04 1.0

90°

"E"

REF

(SEE TABLE 5)

.119 3.02

REF

FIG 5

(RIGHT ANGLE)

(-LA OPTION IS SHOWN ON ALL RIGHT ANGLES

FOR DIMENSIONAL AND LOCATION PURPOSES.)

(SEE CRIMP DETAIL VIEW, SHT 3)

(SAME AS FIG 1, DIFFERENT AS SHOWN)

PIN #1

90°

.100 2.54

(SEE NOTE 9)

"E"

REF

(SEE TABLE 5)

.06 1.5

.04 1.0

.219 5.56

REF

PIN #1

PIN #2

90°

.06 1.5

.100 2.54

.200 5.08

(SEE NOTE 9)

"E"

REF

(SEE TABLE 5)

.04 1.0

.320 8.13

REF

PIN #1

PIN #2

PIN #3

-S

-D

-T

SHEET OF

.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY

BY:

TSW-XXX-XX-XXX-X-XX-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

08/24/1988

SHEET SCALE: 3:1

REVISION DG

c:\enterprisevault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

BANDOLIER (REF)

POST AREA

TAIL AREA

IN PROCESS 1

(SAME AS FIG. 1, DIFFERENT AS SHOWN)

-T PLATING ONLY

(SEE NOTE 11)

(SEE TABLE 7)

SHEET OF

.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY

BY:

TSW-XXX-XX-XXX-X-XX-XXX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

08/24/1988

SHEET SCALE: 3:1

REVISION DG

c:\enterprisevault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

.018 0.46

REF (TYP)

.025

0.64

REF (TYP)

(1) .230[5.84] POST FOR -RA OR -RE OPTION

(2) OMIT WITH -Q ROW SPECIFICATION

(3) NOT AVAILABLE IN -RA OR -RE OPTION

(4) NOT AVAILABLE IN -RE OPTION

* SQUARE END OF PIN (T-1RS7-01-XXX-2 SHOULD BE LOCATED AT "C" DIMENSION DURING FILL PROCESS.

(SEE FIG. 6)

.005[0.13]

.008[0.20]

(5) AVAILABLE IN -LL OPTION

(6) AVAILABLE IN -LA OPTION

(7) ON STYLE -08 -LA, RA: "C" = .230[5.84]±

(8) 1.220[30.99] POST FOR STRAIGHT PIN VERSION

FIG 6

(-26 LEAD STYLE)

(SAME AS FIG. 1, DIFFERENT AS SHOWN)

SHEET OF

.025[0.64] SQ. POST TERMINAL STRIP ASSEMBLY

BY:

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

08/24/1988

SHEET SCALE: 3:1

REVISION DG

c:\enterprisevault\DWG\MISC\MKTG\TSW-XXX-XX-XXX-X-XX-XXX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

TSW-XXX-XX-XXX-X-XX-XXX