The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 1mm Pitch Connector for Vertical Connection FX5 Series Connecting Height: Low profile FX5_*P_SH ( 3.6 ) FX5_*S2A_DSA PCB Features Connecting Height: High profile 1. Header Side : 2 Types Available Two header types, low profile and high profile, are prepared according to the contact number variation and the connecting height variation, considering unit connections of HDD, FDD, CDROM and so on. FX5_*S2A_DSA FX5_*P_SH3 The connecting sequence is designed with 2 stages so that the end user side can maintain. 3. Mating Guide In the connecting process, the self-alignment is 1mm high sufficient to the guide level, and the guide rib is provided to achieve easy mating. 4. SMT Coplanarity The coplanarity of SMT soldered area secures the high accuracy of 0.1mm. 5. Miniaturization The connector is miniaturized about 30% in the mounting area, compared with the conventional half pitch connector (1.27mm). Applications Note PC , other business equipments A128 ( 6.6 ) 2. Two-stages Sequential Structure PCB The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose websiteFX5 RoHSSeries1mm search at www.hirose-connectors.com, or contact your Hirose sales representative. Pitch Connector for Vertical Connection Product Specifications Current rating Rating Operating Temperature Range -55c to +85c (Note 1) Storage Temperature Range -10c to +60c (Note 2) 0.5A Voltage rating 100V AC Operating Humidity Range Item 40% to 80% Storage Humidity Range Specifications 40% to 70% Condition 1. Insulation Resistance 100M ohms min. 250V DC 2. Withstanding voltage No flashover or insulation breakdown. 300V AC/1 minute 3. Contact Resistance 50m ohms max. 100mA 4. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Moisture Resistance Contact resistance: 60m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40c and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 60m ohms max. Insulation resistance: 100M ohms min. (-55c: 30 minutes, 15 to 35c: 2 to 3 minutes (-85c: 30 minutes, 15 to 35c: 2 to 3minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 60m ohms max. 500 cycles SMT Reflow: At the recommended temperature profile Manual soldering: 360c for 5 seconds DIP Solder Bath: 260c for 10 seconds Manual soldering: 360c for 5 seconds 8. Resistance to Soldering heat No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Part Material Finish Remarks Insulator Polyamide Beige Header Contact Brass Contact area : Gold plated UL94V-0 ________ Receptacle Contact Phosphor bronze Lead area : Tin plated ________ Note : The black dots on the insulater will not affect performance. Ordering Information Header FX5 - * P - SH 3 q q Series Name w e r t t Connector Height : FX5 w Number of Contacts : 20, 40, 52, 56, 68, 80 Blank : 6.5mm e Connector Type 3 : 9.5mm P: Header r Contact type SH : Right angle SMT type Note: The 56 contact header is for SH 3 type only. Receptacle FX5 - * S 2 A - DSA L q q Series Name w e r : FX5 w Number of Contacts : 20, 40, 52, 56, 68, 80 e Connector Type S: Receptacle r Contact Sequence 2 : 2 Stages Sequence t y u y Contact type DSA : Straight through hole type u Board prefixed pin Blank : Without board prefixed pin L : With board Prefixed pin t Serial No. : A A129 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX5 Series1mm Pitch Connector for Vertical Connection Header Low profile High profile a2 1 A B0.3 C0.5 D0.3 Polarity Mark a1 a* 0 1_0.2 9.30.3 9.30.3 0 1_0.2 a2 1 * == (number of contacts)/2 A B0.3 C0.5 D0.3 Polarity Mark 1.70.3 a* * * b1 a1 60.3 b1 * * 9.50.3 b* a1 60.3 a1 b* b2 ( 3.5 ) b2 b1 1.70.3 E F0.3 t0.20.05w0.20.05 2_O2.30.15 6.350.3 G0.1 1.40.3 2.50.3 E F0.3 3.20.2 2.50.3 6.350.3 b* a* 0.5 ( O1.3 ) t0.20.05w0.20.05 2_O2.30.15 3.20.2 2.50.3 b2 a1 b1 a2 1.40.3 2.50.3 ( 1.3 ) ( O1.3 ) b* a* b2 0.5 a1 b1 a2 ( 1.3 ) 6.50.3 ( 0.5) b1 G0.1 Unit: mm Part Number A130 CL No. FX5-20P-SH(71) 575-0001-7-71 FX5-20P-SH3(71) 575-0041-1-71 FX5-40P-SH(71) 575-0005-8-71 FX5-40P-SH3(71) 575-0045-2-71 FX5-52P-SH(71) 575-0006-0-71 FX5-52P-SH3(71) 575-0046-5-71 FX5-56P-SH3(71) 575-1001-2-71 FX5-68P-SH(71) 575-0008-6-71 FX5-68P-SH3(71) 575-0048-0-71 FX5-80P-SH(71) 575-0009-9-71 FX5-80P-SH3(71) 575-0049-3-71 Number of Contacts A B C D E F G 20 9 24 22.9 19 9.5 20 13.6 40 19 34 32.9 29 19.5 30 23.6 52 25 40 38.9 35 25.5 36 29.6 56 27 42 40.9 37 27.5 38 31.6 68 33 48 46.9 43 33.5 44 37.6 80 39 54 52.9 49 39.5 50 43.6 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose websiteFX5 RoHSSeries1mm search at www.hirose-connectors.com, or contact your Hirose sales representative. Pitch Connector for Vertical Connection A 0.2 a2 a1 1 a* * * b1 a1 60.3 4.250.2 Receptacle * = (number of contacts)/2 b* b1 b2 5.90.2 B 0.3 +0.1 -0.2 F 3.40.3 E F-F 3.30.3 E-E C F E 1.50.2 D 0.3 1.50.2 0.60.3 1.50.2 30.3 t0.250.03xw0.40.05 Polarity Mark Unit: mm Part Number CL No. FX5-20S2A-DSA(71) 575-0101-1-71 FX5-20S2A-DSAL(71) 575-0121-9-71 FX5-40S2A-DSA(71) 575-0105-2-71 FX5-40S2A-DSAL(71) 575-0125-0-71 FX5-52S2A-DSA(71) 575-0106-5-71 FX5-52S2A-DSAL(71) 575-0126-2-71 FX5-56S2A-DSA(71) 575-0107-8-71 FX5-56S2A-DSAL(71) 575-0127-5-71 FX5-68S2A-DSA(71) 575-0108-0-71 FX5-68S2A-DSAL(71) 575-0128-8-71 FX5-80S2A-DSA(71) 575-0109-3-71 FX5-80S2A-DSAL(71) 575-0129-0-71 Number of Contacts A B C 20 9 19 15.08 40 19 29 25.08 52 25 35 31.08 56 27 37 33.08 68 33 43 39.08 80 39 49 45.08 D Order of Contact Sequence(Contact No.) 1 2 __ a1,a2,a9,a10 a3 to a8 15 __ b1,b2,b9,b10 b3 to b8 a1,a2,a19,a20 a3 to a18 25 __ b1,b2,b19,b20 b3 to b18 a1,a2,a25,a26 a3 to a24 31 __ b1,b2,b25,b26 b3 to b24 a1,a2,a27,a28 a3 to a26 33 __ b1,b2,b27,b28 b3 to b26 a1,a2,a33,a34 a3 to a32 39 __ b1,b2,b33,b34 b3 to b32 a1,a2,a39,a40 a3 to a38 45 b1,b2,b39,b40 b3 to b38 RoHS YES A131 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX5 Series1mm Pitch Connector for Vertical Connection BPCB mounting pattern Header FX5-*-SH, FX5-*-SH3 40.1 A 0.1 40.1 B 0.05 C 0.05 2.050.05 0.30.03 (Land pattern) 0.250.03 (Metal mask) 3.150.1 0.50.02 a* a2 2-O2.3 b* D0.1 +0.1 0 2-O1.40.05 3.40.1 b2 b1 (Polarity mark position) 2.150.1 a1 2.10.1 2.550.1 (5.95) (Mating side) * = (number of contacts)/2 Receptacle FX5-*S2A-DSA 1.50.05 E 0.1 10.05 a2 a1 a* a3 1.50.05 a4 b2 b4 O0.6 +0.1 0 b3 b* 1.50.05 b1 b* 1.50.05 (Polarity mark position) * = (number of contacts)/2 FX5-*S2A-DSAL F 0.1 30.05 1.50.05 E 0.1 10.05 a2 a* a3 a1 a4 2-O2.3 +0.1 0 1.50.05 (Polarity mark position) b1 b2 b4 O0.6 +0.1 0 b3 * = (number of contacts)/2 Unit: mm Number of Contacts A B C D E F 20 16 13.6 9.5 20 9 15 40 26 23.6 19.5 30 19 25 52 32 29.6 25.5 36 25 31 56 34 31.6 27.5 38 27 33 68 40 37.6 33.5 44 33 39 80 46 43.6 39.5 50 39 45 Note: If the connector is installed in the board beyond the above recommended size, it may cause the connector to board mounting failure or the soldering failure. It is desirable to implement the board process on the recommended PCB mounting pattern. A132 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose websiteFX5 RoHSSeries1mm search at www.hirose-connectors.com, or contact your Hirose sales representative. Pitch Connector for Vertical Connection BRecommended Temperature Profile 260 HRS test conditions Test boardGlass epoxy 110mm40mm1.6mm thick Solder method :Reflow Solder composition :Paste, 96.5%Sn/3%Ag/0.5%Cu Metal mask : 0.15mm thick Reflow cycles : 1 cycles (MAX240c) 240 220 200c Temperature (c) 200 180 160 140 0 150c (90 to 120s) Pre-heating time (150 to 200c) (MAX 60s) Soldering Time (220c min.) Time (s) The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. BCleaning Conditions 1. Organic Solvent Cleaning Solvent Cold Cleaning Heat Cleaning IPA (Isopropyl alcohol) HCFC (Hydrochlorophloro carbon) *Methylene chroride isn't suitable for this product solvent. 2. Liquid Cleaning When liquid detergents (such as terpene, alkali saponifier) are used, please select the cleaning detergent according to the influence table on metal or resin which is issued from each detergent manufacturer.In addition, please do not leave the connector outdoor, in which moisture remains. 3. Cautions for Cleaning As for organic solvent or liquid cleaning, if flux or detergent remains on the connector, it can cause electrical performance degradation. Therefore, please make sure that the connector is thoroughly cleaned so that neither flux nor detergent is found on the connector. A133 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FX5 Series1mm Pitch Connector for Vertical Connection BConnector Precautions 1 1. Tolerance Clearance on Mating Side The effective connection clearance of the product is 1.6mm. Please use the product so as to specify within 1mm the clearance between the header and the receptacle in the connection process. 2. Header Connector Height The SMT connector height doesn't include the solder paste thickness. Thus, please consider that the stacking height will slightly increase after the mounting process. Mating Height: Low profile Mating Height: High profile FX5-*P-SH3 PCB ( 6.6) ( 3.6) FX5-P-SH PCB 3. Screw Fastening Torque (SMT Type) When the screw is fastened, please use the M2 screw. The recommended fastening torque is 0.15(N.m) max. Nut (M2) Plain sheet (t = 0.3) Board (t = 1.6) Screw (M2) Spring sheet (t = 0.5) 4. Prefixed Process to Board (Through hole Type) If the prefixed process is required for board mounting, please use the prefixed pin type. (Applicable Thickness t = 1.60.1) Note: When the connector is mounted on the board, the dip post is guided into the board through-hole in order to prevent the dip post damage, and then insert the board in parallel to the connector so as to push in the prefixed pin. Prefixed pin PCB Dip post 5. Plug and Play When the connector is inserted or extracted in the active line state, please contact HRS company. 6. Others It is noted that the forced excessive insertion/extraction will result in damage. Avoid holding the board with the connector only, and fix the board by any other means except for the connector. The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot, but the difference doesn't affect the performance. A134