GlobalOptoisolator The MOC5007, MOC5008 and MOC5009 have a gallium arsenide IRED optically coupled to a high-speed integrated detector with Schmitt trigger output. Ideal for applications requiring electrical isolation, fast response time, noise immunity and digital logic compatibility. * * * * * * Guaranteed Switching Times -- ton, toff 4 < s Built-In ON/OFF Threshold Hysteresis High Data Rate, 1 MHz Typical (NRZ) Wide Supply Voltage Capability Microprocessor Compatible Drive To order devices that are tested and marked per VDE 0884 requirements, the suffix "V" must be included at end of part number. VDE 0884 is a test option. Applications * Interfacing Computer Terminals to Peripheral Equipment * Digital Control of Power Supplies * Line Receiver -- Eliminates Noise * Digital Control of Motors and Other Servo Machine Applications * Logic to Logic Isolator * Logic Level Shifter -- Couples TTL to CMOS 1 STANDARD THRU HOLE SCHEMATIC MAXIMUM RATINGS (TA = 25C unless otherwise noted) Rating 6 Symbol Value Unit Reverse Voltage VR 6 Volts Forward Current -- Continuous Forward Current -- Peak Pulse Width = 300 s, 2% Duty Cycle IF 60 1.2 mA Amp LED Power Dissipation @ TA = 25C Derate above 25C PD 120 1.41 mW mW/C Output Voltage Range Vo 0 -16 Volts Supply Voltage Range 1 6 2 5 3 4 INPUT LED OUTPUT DETECTOR VCC 3 -16 Volts Output Current IO 50 mA Detector Power Dissipation @ TA = 25C Derate above 25C PD 150 1.76 mW mW/C PD 250 2.94 mW mW/C TA - 40 to + 85 C Tstg - 55 to +150 C TOTAL DEVICE Total Device Power Dissipation @ TA = 25C Derate above 25C Maximum Operating Temperature Storage Temperature Rang Soldering Temperature (10 s) Isolation Surge Voltage(1) (Peak ac Voltage, 60 Hz, 1 Second Duration) TL 260 C VISO 7500 Vac(pk) 1. Isolation surge voltage is an internal device dielectric breakdown rating. 1. For this test, Pins 1 and 2 are common, and Pins 4, 5 and 6 are common. PIN 1. 2. 3. 4. ANODE CATHODE NC OPEN COLLECTOR OUTPUT 5. GROUND 6. VCC MOC5007, MOC5008, MOC5009 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)(1) Symbol Min Typ1) Max Unit Reverse Leakage Current (VR = 3 V, RL = 1 M) IR -- 0.05 10 A Forward Voltage (IF = 10 mA) Forward Voltage (IF = 0.3 mA) VF -- 0.75 1.2 0.95 1.5 -- Volts Capacitance (VR = 0 V, f = 1 MHz) C -- 18 -- pF VCC 3 -- 15 Volts ICC(off) -- 1 5 mA IOH -- -- 100 A ICC(on) -- 1.6 5 mA VOL -- 0.2 0.4 Volts Characteristic INPUT LED OUTPUT DETECTOR Operating Voltage Supply Current (IF = 0, VCC = 5 V) Output Current, High (IF = 0, VCC = Vo = 15 V) COUPLED Supply Current (IF = IF(on), VCC = 5 V) Output Voltage, Low (RL = 270 , VCC = 5 V, IF = IF(on)) Threshold Current, ON (RL = 270 , VCC = 5 V) MOC5007 MOC5008 MOC5009 IF(on) -- -- -- 1.2 -- -- 1.6 4 10 mA Threshold Current, OFF (RL = 270 , VCC = 5 V) MOC5007 MOC5008, 5009 IF(off) 0.3 0.3 0.75 -- -- -- mA Hysteresis Ratio (RL = 270 , VCC = 5 V) IF(off) IF(on) 0.5 0.75 0.9 Isolation Voltage(2) 60 Hz, AC Peak, 1 second, TA = 25C VISO 7500 -- -- Vac(pk) ton -- 1.2 4 s tf -- 0.1 -- toff -- 1.2 4 tr -- 0.1 -- Turn-On Time RL = 270 (3) VCC = 5 V, IF = IF(on) TA = 25C Fall Time Turn-Off Time Rise Time 1. Always design to the specified minimum/maximum electrical limits (where applicable). 2. For this test, IRED Pins 1 and 2 are common and Output Gate Pins 4, 5, 6 are common. 3. RL value effect on switching time is negligible. ICC 5V IF 1 IF (on) 6 4 Vin tr = tf = 0.01 s Z = 50 toff ton 2 Vo tf RL tr Figure 1. Switching Test Circuit 5 270 VO (OPEN COLLECTOR OUTPUT) MOC5007, MOC5008, MOC5009 VO, OUTPUT VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS 6 VOH 5 4 IF(off) 3 IF(on) RL = 270 VCC = 5 V TA = 25C 2 1 VOL 0 0 0.75 1 IF, INPUT CURRENT (mA) 2 IF(on), IF(off), THRESHOLD CURRENT (NORMALIZED) IF, THRESHOLD CURRENT (NORMALIZED) Figure 2. Transfer Characteristics for MOC5007 1.6 1.4 TURN ON THRESHOLD 1.2 1 TURN OFF THRESHOLD 0.8 0.6 IF NORMALIZED TO IF(on) AT VCC = 5 V TA = 25C 0.4 0 2 4 6 8 10 12 VCC, SUPPLY VOLTAGE (VOLTS) 14 1.6 1.4 1.2 1 0.8 NORMALIZED TO VCC = 5 V TA = 25C 0.6 -50 0 25 50 TA, TEMPERATURE (C) 75 100 Figure 4. Threshold Current versus Temperature 1 TA = 0C 25C 70C 0.5 6 IC , SUPPLY CURRENT (mA) VOL , OUTPUT VOLTAGE, LOW (VOLTS) Figure 3. Threshold Current versus Supply Voltage -25 0.2 0.1 0.05 0.02 1 2 5 10 20 IO, LOAD CURRENT (mA) 50 100 Figure 5. Output Voltage, Low versus Load Current IF = 5 mA 4 0C 25C 70C 2 0 0 2 IF = 0 mA 4 6 8 10 12 VCC, SUPPLY VOLTAGE (VOLTS) 14 Figure 6. Supply Current versus Supply Voltage 16 MOC5007, MOC5008, MOC5009 PACKAGE DIMENSIONS -A- 6 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. -B- 1 STYLE 5: PIN 1. 2. 3. 4. 5. 6. 3 F 4 PL C N -T- L ANODE CATHODE NC OUTPUT GROUND VCC DIM A B C D E F G J K L M N K SEATING PLANE J 6 PL 0.13 (0.005) G M E 6 PL D 6 PL 0.13 (0.005) M T A M B M T B M A M M INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.300 BSC 0_ 15 _ 0.015 0.100 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 7.62 BSC 0_ 15 _ 0.38 2.54 THRU HOLE -A- 6 4 -B- 1 S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3 F 4 PL L H C -T- G J K 6 PL E 6 PL 0.13 (0.005) D 6 PL 0.13 (0.005) M T A M B M SEATING PLANE T B M A M M SURFACE MOUNT DIM A B C D E F G H J K L S INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.020 0.025 0.008 0.012 0.006 0.035 0.320 BSC 0.332 0.390 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.51 0.63 0.20 0.30 0.16 0.88 8.13 BSC 8.43 9.90 MOC5007, MOC5008, MOC5009 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. -A- 6 4 -B- 1 3 L N F 4 PL C -T- SEATING PLANE G J K D 6 PL E 6 PL 0.13 (0.005) M T A M B M 0.4" LEAD SPACING DIM A B C D E F G J K L N INCHES MIN MAX 0.320 0.350 0.240 0.260 0.115 0.200 0.016 0.020 0.040 0.070 0.010 0.014 0.100 BSC 0.008 0.012 0.100 0.150 0.400 0.425 0.015 0.040 MILLIMETERS MIN MAX 8.13 8.89 6.10 6.60 2.93 5.08 0.41 0.50 1.02 1.77 0.25 0.36 2.54 BSC 0.21 0.30 2.54 3.81 10.16 10.80 0.38 1.02 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (c) 2000 Fairchild Semiconductor Corporation