FUJITSU SEMICONDUCTOR DATA SHEET DS04-13200-3E LINEAR IC 1 CHANNEL 8-BIT D/A CONVERTER MB4072 1 CHANNEL 8-BIT D/A CONVERTER The Fujitsu MB4072 is a High-Speed Digital to Analog Converter IC. The MB4072's current outputs are high impedance open-collector, which provide voltage output with a load or current to voltage converter for various applications with operational amplifiers, microcomputers, etc. Threshold level of digital inputs is variable with the level control input for various interface level. * * * * * * * * * * * * Settling Time : 85ns Linearity Error : 0.19%max. Full-scale Temperature coefficient: 10ppm/C typ. Output Voltage Compliance : -10V to +18V Multiplying Operation True/Complimentary Current Sink Output Adjustable Threshold Level of Digital Inputs :Interface directly with TTL, CMOS, ECL, etc. Wide Supply Voltage Range : 4.5V to 18V Low Power Consumption : 33mW at 5V typ. Operation Temperature : -40C to +85C Compatible with DAC-08 Package : Plastic DIP Package: (Suffix: -P) Plastic FPT Package: (Suffix: -PF) PLASTIC PACKAGE DIP-16P-M04 PLASTIC PACKAGE FPT-16P-M06 PIN ASSIGNMENT ABSOLUTE MAXIMUM RATINGS (TA =25C) Parameter Supply Voltage Digital Input Voltage Threshold Control Voltage Reference Input Voltage Differential Reference Input Voltage Reference Input Current Power Consumption Storage Temp. NOTE: VLC 1 16 COMP IOUT 2 15 VREF(-) V- 3 14 VREF(+) 4 13 V+ 12 B8(LSB) Symbol Value Unit V+ to V- 37 V VI V- to V- +37 V IOUT TOP VIEW VLC V- to V+ V (MSB)B1 5 VREF(+) V- to V+ V B2 6 11 B7 VREF(-) V- to V+ V B3 7 10 B6 VREF(+) to VREF(-) 18.5 V B4 8 9 B5 IREF 5 mA PD 500 mW TSTG -55 to +125 C Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit. 1 MB4072 Fig. 1 - BLOCK DIAGRAM V+ VLC MSB B1 B2 B3 B4 B5 B6 B7 LSB B8 13 1 5 6 7 8 9 10 11 12 INTERFACE LEVEL CONTROL CIRCUIT 4 IOUT BIAS NETWORK ___ 2 IOUT VREF(+) 14 CURRENT SW. + VREF(-) 15 REF Amp 16 3 COMP V- RECOMMENDED OPERATING CONDITIONS Parameter Symbol Unit Min Typ Max V+ +4.5 - +18 V V- -18 - -4.5 V TA -40 - +85 C Supply Voltage Operating Temperature 2 MB4072 ELECTRICAL CHARACTERISTICS (Recommended Operating Conditions unless otherwise noted.) (V+ = +15V, V- = -15V, IREF = 2.0mA, TA = -40C to +85C ) Value Parameter Symbol Unit Min Typ Max Resolution 8 8 8 bits Monotonicity 8 8 8 bits Linearity Error LE - - 0.19 % (FSR) Settling Time (Final Value: 1/2 LSB, TA=25C, On/Off Switching for Each bit/All bits) tS - 85 150 ns tPLH tPHL - 35 60 ns TCIFS - 10 50 ppm/C Output Voltage Range (IFS 1/2 LSB, ROUT 20M typ.) VOC -10 - +18 V Output Current at full-scale (VREF=10.000V, R14=5.000k, R15=5.000k, TA=25C) IFS4 1.94 1.99 2.04 mA Symmetry at full-scale (IFSS=IFS4-IFS2) TFSS - 1.0 8.0 A Output Current at zero scale IZS - 0.2 2.0 A Output Current Range (R14=5.000k, R15=5.000k, VREF=+15.0V, V-=-10V) IOR1 2.1 - - mA Output Current Range (R14=5.000k, R15=5.000k, VREF=+25.0V, V-=-12V) IOR2 4.2 - - mA Low-level Input Voltage (VLC=0V) VIL - - 0.8 V High-level Input Voltage (VLC=0V) VIH 2.0 - - V Low-level Input Current (VLC=0V, VIN=-10V to +0.8V) IIL - -0.2 -10 A High-level Input Current (VLC=0V, VIN=2.0V to 18V) IIH - 0.002 10 A Propagation Delay Time (TA=25C, On/Off Switching for Each bit/All bits) Temperature coefficient at full-scale 3 MB4072 ELECTRICAL CHARACTERISTICS (Continued) (VS=15V, IREF = 2.0mA, TA = -40C to +85C) Value Parameter Symbol Unit Min Typ Max VIS -10 - +18 V VTHR -10 - +13.5 V Reference Bias Current I15 - -1.0 -3.0 A Reference Input Through Rate (REQ=200, RL=100, CL=0pF) dl dt 4.0 8.0 - mA/s Supply Voltage Sensitivity* (V+=+4.5V to +18V, IREF=1mA) PSSIFS+ - 0.0003 0.01 %/% Supply Voltage Sensitivity* (V-=-4.5V to -18V, IREF=1mA) PSSIFS- - 0.002 0.01 %/% I- - 2.3 3.8 mA I- - -4.3 -5.8 mA I- - 2.4 3.8 mA I- - -6.4 -7.8 mA I- - 2.5 3.8 mA I- - -6.5 -7.8 mA (V+=+5V, V-=-5V, IREF=1.0mA) PD - 33 48 mW (V+=+5V, V-=-15V, IREF=2.0mA) PD - 103 136 mW (V+=+15V, V-=-15V, IREF=2.0mA) PD - 135 174 mW Logic Input Voltage Range (V-=-15V) Logic Threshold Voltage Range (V+=+15V, V-=-15V) (V-=+5V, V-=-5V, IREF=1.0mA) Supply Current (V+=+5V, V-=-15V, IREF=2.0mA) (V+=+15V, V-=-15V, IREF=2.0mA) Power Dissipation *Note: 4 IFS PSSIFS=(____ IFS 18-4.5 x 100) / ( _______ x 100) 15 MB4072 Fig. 2 - WAVEFORM SYNTHESIZER Pattern Generator 2mA +10V 14 5k IO 5k __ IO - 4 MB4072 15 5k 5 to 12 2 + VOUT 5k 5 MB4072 PACKAGE DIMENSIONS 16-LEAD PLASTIC DUAL IN-LINE PACKAGE (Case No.: DIP-16P-M04) 15MAX +.008 +0.20 .770 -.012 (19.55 -0.30 ) INDEX-1 .244.010 (6.200.25) .300(7.62) TYP INDEX-2 +.012 .039-0 +.012 -0 (1.52 +0.30 ) -0 .010.002 .060 (0.99+0.30 ) -0 (0.250.05) .172(4.36)MAX .118(3.00)MIN .100(2.54) TYP .050(1.27) MAX 1991 FUJITSU LIMITED D16033S-2C 6 .018.003 .020(0.51)MIN (0.460.08) Dimensions in inches (millimeters) MB4072 PACKAGE DIMENSIONS (Continued) 16-LEAD PLASTIC FLAT PACKAGE (Case No.: FPT-16P-M06) .089(2.25)MAX +.010 +0.25 .400 -.008 (10.15-0.20 ) (MOUNTING HEIGHT) .002(0.05)MIN (STAND OFF HEIGHT) .307.016 (7.800.40) INDEX .209.012 "B" +.016 +0.40 .268 -.008 (6.80 -0.20 ) (5.300.30) .020.008 (0.500.20) .050(1.27) TYP .018.004 O.005(0.13) .006 +.002 (0.15 +0.05 ) -.001 -0.02 M (0.450.10) "A" Details of "A" part .016(0.40) .004(0.10) .350(8.89) REF 1991 FUJITSU LIMITED F16015S-2C .008(0.20) .007(0.18) MAX .027(0.68) MAX Details of "B" part .006(0.15) .008(0.20) .007(0.18) MAX .027(0.68) MAX Dimensions in inches (millimeters) 7 MB4072 FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 1015, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211, Japan Tel: (044) 754-3753 Fax: (044) 754-3329 North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, U.S.A. Tel: (408) 922-9000 Fax: (408) 432-9044/9045 Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LIMITED No. 51 Bras Basah Road, Plaza By The Park, #06-04 to #06-07 Singapore 189554 Tel: 336-1600 Fax: 336-1609 All Rights Reserved. Circuit diagrams utilizing Fujitsu products are included as a means of illustrating typical semiconductor applications. Complete information sufficient for construction purposes is not necessarily given. The information contained in this document has been carefully checked and is believed to be reliable. However, Fujitsu assumes no responsibility for inaccuracies. The information contained in this document does not convey any license under the copyrights, patent rights or trademarks claimed and owned by Fujitsu. Fujitsu reserves the right to change products or specifications without notice. No part of this publication may be copied or reproduced in any form or by any means, or transferred to any third party without prior written consent of Fujitsu. The information contained in this document are not intended for use with equipments which require extremely high reliability such as aerospace equipments, undersea repeaters, nuclear control systems or medical equipments for life support. F9601 FUJITSU LIMITED Printed in Japan 8