GBPC12, 15, 25 and 35 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier GBPC-W Major Ratings and Characteristics GBPC ~ IF(AV) 12 A, 15 A, 25 A, 35 A VRRM 50 V to 1000 V IFSM 200 A, 300 A, 300 A, 400 A IR 5 A VF 1.1 V Tj max. 150 C ~ ~ ~ ~ ~ Features Mechanical Data * UL Recognition file number E54214 * Universal 3-way terminals: snap-on, wire wraparound, or P.C.B. mounting * Typical IR less than 0.3 A * High surge current capability * Low thermal resistance * Solder Dip 260 C, 40 seconds Case: GBPC, GBPC-W Epoxy meets UL-94V-0 Flammability rating Terminals: Nickel plated on faston lugs or Silver plated on wire leads (E4 Suffix), solderable per J-STD-002B and JESD22-B102D. Suffix letter "W" added to indicate wire leads (e.g. GBPC12005W) Polarity: As marked, Positive lead by belevled corner Mounting Torque: 20 inches-lbs. max. Typical Applications General purpose use in ac-to-dc bridge full wave rectification for Power Supply, Home Appliances, Office Equipment, Industrial Automation applications Maximum Ratings Ratings at 25 C ambient temperature unless otherwise specified. Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current (See Fig.1) Peak forward surge current single sinewave superimposed on rated load Rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing Symbols GBPC12 GBPC15 GBPC25 GBPC35 GBPC12 GBPC15 GBPC25 GBPC35 GBPC12 GBPC15 GBPC25 GBPC35 RMS isolation voltage from case to leads Operating junction storage temperature range Document Number 88612 08-Jul-05 VRRM VRMS VDC IF(AV) IFSM I2 t VISO TJ, TSTG 005 50 35 50 01 100 70 100 GBPC12, 15, 25, 35 02 04 06 200 400 600 140 280 420 200 400 600 12 15 25 35 200 300 300 400 160 375 375 660 2500 - 55 to + 150 Units 08 800 560 800 10 1000 700 1000 V V V A A A2 sec V C www.vishay.com 1 GBPC12, 15, 25 and 35 Vishay General Semiconductor Electrical Characteristics Ratings at 25 C ambient temperature unless otherwise specified. Parameter Test condition Symbols GBPC12, 15, 25, 35 005 01 02 04 06 Units 08 10 IF = 6.0 A IF = 7.5 A IF = 12.5 A IF = 17.5 A VF 1.1 V Maximum reverse DC current at rated DC blocking voltage per leg TA = 25 C TA = 125 C IR 5.0 500 A Typical junction capacitance per leg at 4 V, 1 MHz CJ 300 pF Maximum instantaneous forward drop per leg GBPC12 GBPC15 GBPC25 GBPC35 Thermal Characteristics Ratings at 25 C ambient temperature unless otherwise specified. Parameter Symbols GBPC12, 15, 25, 35 005 GBPC12-25 GBPC35 Typical thermal resistance per leg (1) 01 02 04 RJC 06 Units 08 10 1.9 1.4 C/W Notes: (1) Thermal resistance from junction to case per leg (2) Bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #10 screw Ratings and Characteristics Curves (TA = 25 C unless otherwise noted) 40 GBPC35 Bridges Mounted on 9.5 x 3.5 x 4.6" (22.9 x 8.9 x 11.7 cm) AL. Finned Plate 35 30 5 x 6 x 4.9" AL, Finned Plate 25 20 5 x 4 x 3" AL. Finned Plate 15 6 x 2.2 x 2.2" AL. Finned Plate 10 5 0 60 HZ Resistive or Inductive Load 0 25 50 100 125 150 175 200 Figure 1. Maximum Output Rectified Current 2 60 HZ Resistive or Inductive Load 35 RthS-A = 0.5 C/W 30 GBPC25 25 RthS-A = 0.5 C/W 20 GBPC15 RthS-A = 1.0 C/W 15 10 GBPC12 5 RthS-A = 1.0 C/W 0 75 Case Temperature (C) www.vishay.com Average Forward Current (A) Average Forward Current (A) 40 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (C) Figure 2. Maximum Output Rectified Current Document Number 88612 08-Jul-05 GBPC12, 15, 25 and 35 Vishay General Semiconductor 70 Instantaneous Reverse Leakage Current (A) Average Power Dissipation of Bridge (W) 80 60 50 TJ = TJ max. 40 Resistive or Inductive Load 30 20 10 0 TJ = 150 C 10 1 40 30 20 10 50 - 400 V 600 - 1000 V TJ = 25 C 0.1 0.01 0 TJ = 125 C 100 Capacitive Load 0 Average Output Current (A) Figure 3. Maximum Power Dissipation GBPC35 GBPC15 GBPC25 100 10 Reverse Voltage (V) Figure 4. Maximum Non-Repetitive Peak Forward Surge Current Per Leg Figure 7. Typical Junction Capacitance Per Leg 100 1,000 10 Transient Thermal Impedance (CW) Instantaneous Forward Current (A) 100 10 1 100 Number of Cycles at 60 HZ TJ = 25 C Pulse Width = 300 s 1% Duty Cycle 1 0.1 0.6 0.8 1 1.2 1.4 1.6 Instantaneous Forward Voltage (V) Figure 5. Typical Instantaneous Forward Characteristics Per Leg Document Number 88612 08-Jul-05 100 TJ = 25 C f = 1.0 MHZ Vsig = 50MVp-p 50 0.01 0.4 80 GBPC12 1.0 Cycle 1 60 600 TJ = TJ max. 0.5 Single Sine-Wave 100 40 Figure 6. Typical Reverse Leakage Characteristics Per Leg Junction Capacitance (pF) Peak Forward Surge Current (A) 500 20 Percent of Rated Peak Reverse Voltage (%) TJ = 25 C f = 1.0 MHZ Vsig = 50MVp-p 100 10 1 0.01 0.1 1 10 100 t, Heating Time (sec.) Figure 8. Typical Transient Thermal Impedance Per Leg www.vishay.com 3 GBPC12, 15, 25 and 35 Vishay General Semiconductor Package outline dimensions in inches (millimeters) GBPC GBPC-W Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) 1.135 (28.8) 1.115 (28.3) 0.24 (6.0) 0.18 (4.6) 0.042 (1.07) 0.038 (0.97) DIA. 0.310 (7.62) 0.290 (7.36) www.vishay.com 4 0.24 (6.0) 0.18 (4.6) 0.732 (18.6) 0.692 (17.6) 0.470 (11.9) 0.430 (10.9) 0.50 (12.7) 0.44 (11.7) Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) 0.672 (17.1) 0.632 (16.1) AC 0.672 (17.1) 0.632 (16.1) 1.135 (28.8) 1.115 (28.3) 0.582 (14.8) 0.542 (13.8) 0.034 (0.86) 0.030 (0.76) 0.732 (18.6) 0.692 (17.6) 0.094 (2.4) DIA. 1.25 (31.8) MIN. 1.135 (28.8) 1.115 (28.3) 0.034 (0.86) 0.030 (0.76) 0.310 (7.62) 0.290 (7.36) 0.25 (6.35) 0.840 (21.3) 0.740 (18.8) Document Number 88612 08-Jul-05 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1