F-219 (Rev 23JAN19) TMM-110-01-S-D-SM 10 YEAR MFG WITH 30 " GOLD TMM-112-01-F-S-SM EXTENDED LIFE PRODUCT HIGH MATING CYCLES TMM-130-05-L-S-SM (2.00 mm) .0787" TMM SERIES LOW-PROFILE SMT HEADER Board Mates: CLT, SQT, SQW, ESQT, TLE, SMM, MMS Cable Mates: TCSD SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?TMM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating: 3.2 A per pin (2 pins powered) Operating Temp Range: -55 C to +105 C with Tin; -55 C to +125 C with Gold Voltage Rating: 281 VAC mated with SQW; 250 VAC mated with SQT RoHS Compliant: Yes (2.00 mm) .0787" pitch Available with optional * Pick & place pads * Alignment pins * Tape & reel packaging (2.77 mm) .109" Low Profile (2.00 mm) .0787" pitch HIGH-SPEED CHANNEL PERFORMANCE 8 Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.15 mm) .006" max* *(.004" stencil solution may be available; contact IPG@samtec.com) TMM 1 G b p s NO. PINS PER ROW RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality LEAD STYLE Specify LEAD STYLE from chart below. 02 thru 40 FILE NO. E111594 PLATING OPTION * Other platings 01 No. of positions x (2.00) .0787 = Gold flash on post, Matte Tin on tail -L 02 80 79 (0.50) .020 SQ 2 mm Shunt Specify 2SN-BK-G for 2 mm shunt with Gold plating. (4.45) .175 (1.95) .077 (3.99) .157 (2.00) .0787 -"XXX" -S = Polarized Position (Specify position of omitted pin) -T = Pick & Place Pad (3 positions minimum) A LEAD STYLE (3.94) .155 01 -D -P = Matte Tin Other Solutions Throughhole = Alignment Pin (Metal or plastic at Samtec's discretion) (5 positions minimum) (-D only) = 30 " (0.76 m) Gold on post, Matte Tin on tail (1.97) .078 -TR = Tape & Reel Packaging (3 thru 36 positions only) MATES WITH -01 SQT, SQW, ESQT, (3.20) .126 TLE, SMM, MMS, TCSD -04 -05 -06 (1.91) .075 CLT (1.65) .065 (4.27) .168 CLT-BE (1.27) .050 TYP (1.50) .059 A (5.00) .197 (1.27) .050 (7.06) .278 -D (4.83) .190 -S (5.08) .200 -P Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM OTHER OPTION -A = Single Row = Double Row = 10 " (0.25 m) Gold on post, Matte Tin on tail 40 Note: Some sizes, styles and options are non-standard, non-returnable. SM -S -F ALSO AVAILABLE (MOQ Required) ROW OPTION All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.