(2.00 mm) .0787"
TMM–130–05–L–S–SM
(2.00 mm)
.0787" pitch
Available with optional
• Pick & place pads
• Alignment pins
• Tape & reel packaging
(2.00 mm)
.0787"
pitch
(2.77 mm)
.109" Low Profile
TMM–110–01–S–D–SM
TMM–112–01–F–S–SM
Board Mates:
CLT, SQT, SQW, ESQT,
TLE, SMM, MMS
Cable Mates:
TCSD
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
TMM 1NO. PINS
PER ROW
LEAD
STYLE
OTHER
OPTION
PLATING
OPTION
ROW
OPTION SM
–S
= Single
Row
–D
= Double
Row
Specify
LEAD
STYLE
from
chart
below.
–A
= Alignment Pin
(Metal or plastic at
Samtec’s discretion)
(5 positions minimum)
(–D only)
–“XXX”
= Polarized Position
(Specify position of
omitted pin)
–P
= Pick & Place Pad
(3 positions minimum)
–TR
= Tape & Reel Packaging
(3 thru 36 positions only)
02 thru 40
–P
For complete specifications and
recommended PCB layouts
see www.samtec.com?TMM
Insulator Material:
Black Liquid Crystal Polymer
Terminal Material:
Phosphor Bronze
Plating:
Sn or Au over
50 µ" (1.27 µm) Ni
Current Rating:
3.2 A per pin
(2 pins powered)
Operating Temp Range:
-55 °C to +105 °C with Tin;
-55 °C to +125 °C with Gold
Voltage Rating:
281 VAC mated with SQW;
250 VAC mated with SQT
RoHS Compliant:
Ye s
–F
= Gold flash on post,
Matte Tin on tail
–L
= 10 µ" (0.25 µm)
Gold on post,
Matte Tin on tail
–S
= 30 µ" (0.76 µm)
Gold on post,
Matte Tin on tail
–T
= Matte Tin
LOW-PROFILE SMT HEADER
For complete scope
of recognitions see
www.samtec.com/quality
ALSO AVAILABLE
(MOQ Required)
• Other platings
TMM SERIES
–D –S
(7.06)
.278
(4.83)
.190
(1.27)
.050
(1.27)
.050 TYP
A
(3.94)
.155
(1.50)
.059
(2.00)
.0787
(0.50) .020 SQ
(1.97)
.078
01
02
40
01
(5.08)
.200
(5.00)
.197
No. of positions x
(2.00) .0787
79
80
FILE NO. E111594
EXTENDED LIFE
PRODUCT
10 YEAR MFG
WITH 30 µ" GOLD
HIGH MATING
CYCLES
Lead–Free Solderable:
Ye s
SMT Lead Coplanarity:
(0.15 mm) .006" max*
*(.004" stencil solution
may be available; contact
IPG@samtec.com)
Note:
Some sizes, styles and
options are non-standard,
non-returnable.
SPECIFICATIONS
PROCESSING
RECOGNITIONS
LEAD STYLE AMATES WITH
–01 (3.20) .126 SQT, SQW, ESQT,
TLE, SMM, MMS, TCSD
–04 (1.91) .075 CLT
–05 (1.65) .065
–06 (4.27) .168 CLT-BE
Other Solutions
2 mm Shunt
Specify
2SN–BK–G
for 2 mm
shunt with
Gold plating.
Through-
hole
(4.45)
.175
(3.99)
.157
(1.95)
.077
HIGH-SPEED CHANNEL PERFORMANCE
Rating based on Samtec reference
channel. For full SI performance data
visit Samtec.com or contact
SIG@samtec.com Gbps
8
F-219 (Rev 23JAN19)
