SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 * * * DW OR N PACKAGE (TOP VIEW) Local Bus-Latch Capability Choice of True or Inverting Logic Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (N) 300-mil DIPs DEVICE OUTPUT LOGIC SN74ALS620A 3 state Inverting SN74ALS621A Open collector True SN74ALS623A, SN74AS623 3 state OEAB A1 A2 A3 A4 A5 A6 A7 A8 GND True description 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 VCC OEBA B1 B2 B3 B4 B5 B6 B7 B8 These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing. These devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending upon the logic levels at the output-enable (OEAB and OEBA) inputs. The output-enable inputs disable the device so that the buses are effectively isolated. The dual-enable configuration gives the transceivers the capability to store data by simultaneously enabling OEAB and OEBA. Each output reinforces its input in this transceiver configuration. When both OEAB and OEBA are enabled and all other data sources to the two sets of bus lines are in the high-impedance state, both sets of bus lines (16 total) remain at their last states. The 8-bit codes appearing on the two sets of buses are identical for the SN74ALS621A, SN74ALS623A, and SN74AS623 or complementary for the SN74ALS620A. The -1 versions of the SN74ALS620A and SN74ALS621A are identical to the standard versions, except that the recommended maximum IOL is increased to 48 mA in the -1 versions. The SN74ALS620A, SN74ALS621A, SN74ALS623A, and SN74AS623 are characterized for operation from 0C to 70C. FUNCTION TABLE INPUTS OPERATION OEBA OEAB SN74ALS620A SN74ALS621A SN74ALS623A SN74AS623 L L B data to A bus B data to A bus H H A data to B bus A data to B bus H L Isolation Isolation H B data to A bus, A data to B bus B data to A bus, A data to B bus L Copyright 1995, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 logic symbols SN74ALS620A 19 OEBA EN1 1 OEAB EN2 2 A1 2 3 A2 A3 A4 A5 A6 A7 A8 18 1 17 4 16 5 15 6 14 7 13 8 12 9 11 19 OEAB A1 A2 A3 A4 A5 A6 A7 A8 1 2 3 19 EN1 OEBA EN2 OEAB 18 1 2 17 4 16 5 15 6 14 7 13 8 12 9 11 B1 B2 A1 A2 B3 A3 B4 A4 B5 B6 B7 B8 A5 A6 A7 A8 1 2 3 B3 B4 B5 B6 B7 B8 POST OFFICE BOX 655303 EN1 EN2 18 1 2 17 4 16 5 15 6 14 7 13 8 12 9 11 These symbols are in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2 B2 SN74ALS623A, SN74AS623 SN74ALS621A OEBA B1 * DALLAS, TEXAS 75265 B1 B2 B3 B4 B5 B6 B7 B8 SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 logic diagrams (positive logic) SN74ALS620A OEBA OEAB SN74ALS621A 19 OEBA 1 OEAB 19 1 18 A1 18 2 B1 A1 2 To Seven Other Transceivers B1 To Seven Other Transceivers SN74ALS623A, SN74AS623 OEBA OEAB A1 19 1 2 18 B1 To Seven Other Transceivers absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI: All inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V I/O ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range, TA: SN74ALS620A, SN74ALS623A . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 recommended operating conditions SN74ALS620A SN74ALS623A VCC VIH Supply voltage VIL IOH Low-level input voltage IOL TA High-level input voltage UNIT MIN NOM MAX 4.5 5 5.5 2 V V 0.8 V High-level output current - 15 mA Low-level output current 24 mA 70 C Operating free-air temperature 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS SN74ALS620A SN74ALS623A MIN VIK VOH VOL II Control inputs A or B ports VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = - 18 mA IOH = - 0.4 mA VCC = 4 4.5 5V IOH = - 3 mA IOH = - 15 mA VCC = 4 4.5 5V IOL = 12 mA IOL = 24 mA VCC = 5 5.5 5V VI = 7 V VI = 5.5 V IIH Control inputs A or B ports VCC = 5 5.5 5V V, VI = 2 2.7 7V IIL Control inputs A or B ports 5V VCC = 5 5.5 V, 4V VI = 0 0.4 VCC = 5.5 V, VO = 2.25 V Outputs high IO SN74ALS620A VCC = 5.5 V ICC SN74ALS623A VCC = 5.5 V TYP UNIT MAX - 1.2 VCC - 2 2.4 V V 3.2 2 0.25 0.4 0.35 0.5 0.1 0.1 20 20 - 0.1 - 0.1 - 30 - 112 24 34 Outputs low 31 44 Outputs disabled 33 47 Outputs high 32 43 Outputs low 39 50 Outputs disabled 42 V mA A mA mA mA 55 All typical values are at VCC = 5 V, TA = 25C. Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V For I/O ports, the parameters IIH and IIL include the off-state output current. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 , R2 = 500 , TA = MIN to MAX SN74ALS620A tPLH tPHL A B tPLH tPHL B A tPZH tPZL OEBA A tPHZ tPLZ OEBA A tPZH tPZL OEAB B tPHZ tPLZ OEAB B UNIT SN74ALS623A MIN MAX MIN MAX 2 10 2 13 2 10 3 11 2 10 2 13 2 10 3 11 3 17 5 22 5 25 5 22 2 12 2 16 3 18 2 19 3 18 5 22 5 25 5 22 2 12 2 16 3 18 2 19 ns ns ns ns ns ns For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI: All inputs and I/O ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Operating free-air temperature range, TA: SN74ALS621A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SN74ALS621A MIN NOM MAX 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL VOH Low-level input voltage 0.8 High-level output voltage 5.5 V Low level output current Low-level 24 48 mA 70 C IOL High-level input voltage 2 TA Operating free-air temperature Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 0 V V V mA 5 SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER SN74ALS621A TYP MAX TEST CONDITIONS MIN VIK IOH VCC = 4.5 V, VCC = 4.5 V, II = - 18 mA VOH = 5.5 V VOL 5V VCC = 4 4.5 IOL = 24 mA IOL = 48 mA VCC = 5 5.5 5V VI = 7 V VI = 5.5 V II Control inputs A or B ports IIH Control inputs A or B ports VCC = 5 5.5 5V V, VI = 2 2.7 7V IIL Control inputs A or B ports VCC = 5 5.5 5V V, VI = 0 0.4 4V VCC = 5 5.5 5V ICC - 1.5 0.1 0.35 0.5 0.35 0.5 0.1 0.1 20 20 - 0.1 - 0.1 Outputs high 29 40 Outputs low 35 48 UNIT V mA V mA A mA mA All typical values are at VCC = 5 V, TA = 25C. Applies only to the -1 version and only if VCC is between 4.75 V and 5.25 V For I/O ports, the parameters IIH and IIL include the off-state output current. switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 680 , TA = MIN to MAX UNIT SN74ALS621A tPLH tPHL A B tPLH tPHL B A tPLH tPHL OEBA A tPLH tPHL OEAB B MIN MAX 10 33 5 20 10 33 5 20 10 39 12 35 10 39 12 35 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 ns ns ns ns SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI: All inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V I/O ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V Operating free-air temperature range, TA: SN74AS623 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. recommended operating conditions SN74AS623 MIN NOM MAX 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IOH Low-level input voltage 0.8 V High-level output current - 15 mA IOL TA Low-level output current 64 mA 70 C High-level input voltage 2 Operating free-air temperature V V 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH VOL II TEST CONDITIONS VCC = 4.5 V, VCC = 4.5 V to 5.5 V, II = - 18 mA IOH = - 2 mA VCC = 4 4.5 5V IOH = - 3 mA IOH = - 15 mA VCC = 4.5 V, Control inputs A or B ports VCC = 5 5.5 5V VCC = 5 5.5 5V V, VI = 2 2.7 7V IIL Control inputs A or B ports 5V VCC = 5 5.5 V, 4V VI = 0 0.4 VCC = 5.5 V, VO = 2.25 V Outputs high VCC = 5.5 V VCC - 2 2.4 Outputs low UNIT V V 3.2 2 0.35 0.55 0.1 VI = 5.5 V Control inputs A or B ports ICC - 1.2 IOL = 64 mA VI = 7 V IIH IO SN74AS623 TYP MAX MIN 0.1 20 70 - 0.5 - 0.75 - 30 - 150 57 93 16 189 V mA A mA mA mA Outputs disabled 71 116 All typical values are at VCC = 5 V, TA = 25C. For I/O ports, the parameters IIH and IIL include the off-state output current. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 switching characteristics (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 , R2 = 500 , TA = MIN to MAX UNIT SN74AS623 tPLH tPHL A B tPLH tPHL B A tPZH tPZL OEBA A tPHZ tPLZ OEBA A tPZH tPZL OEAB B tPHZ tPLZ OEAB B MIN MAX 1 9 1 8 1 9 1 8.5 2 11 2 10 1 7.5 1 11.5 2 11.5 2 11 1 7 1 9 For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 ns ns ns ns ns ns SN74ALS620A, SN74ALS621A, SN74ALS623A, SN74AS623 OCTAL BUS TRANSCEIVERS SDAS226A - DECEMBER 1982 - REVISED JANUARY 1995 PARAMETER MEASUREMENT INFORMATION SERIES 54ALS/74ALS AND 54AS/74AS DEVICES 7V RL = R1 = R2 VCC S1 RL R1 Test Point From Output Under Test CL (see Note A) From Output Under Test RL Test Point From Output Under Test CL (see Note A) CL (see Note A) LOAD CIRCUIT FOR BI-STATE TOTEM-POLE OUTPUTS LOAD CIRCUIT FOR OPEN-COLLECTOR OUTPUTS 3.5 V Timing Input Test Point LOAD CIRCUIT FOR 3-STATE OUTPUTS 3.5 V High-Level Pulse 1.3 V R2 1.3 V 1.3 V 0.3 V 0.3 V tsu Data Input tw th 3.5 V 1.3 V 3.5 V Low-Level Pulse 1.3 V 0.3 V 1.3 V 0.3 V VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VOLTAGE WAVEFORMS PULSE DURATIONS 3.5 V Output Control (low-level enabling) 1.3 V 1.3 V 0.3 V tPZL Waveform 1 S1 Closed (see Note B) tPLZ [3.5 V 1.3 V tPHZ tPZH Waveform 2 S1 Open (see Note B) 1.3 V VOL 0.3 V VOH 1.3 V 0.3 V [0 V 3.5 V 1.3 V Input 1.3 V 0.3 V tPHL tPLH VOH In-Phase Output 1.3 V 1.3 V VOL tPLH tPHL VOH Out-of-Phase Output (see Note C) 1.3 V 1.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. When measuring propagation delay items of 3-state outputs, switch S1 is open. D. All input pulses have the following characteristics: PRR 1 MHz, tr = tf = 2 ns, duty cycle = 50%. E. The outputs are measured one at a time with one transition per measurement. Figure 1. Load Circuits and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 11-Nov-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74ALS620ADW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS620ADWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS620ADWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS620ADWR OBSOLETE SOIC DW 20 TBD Call TI SN74ALS620AN ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS620ANE4 ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS621A-1DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621A-1DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621A-1DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621A-1N ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS621A-1NE4 ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS621ADW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621ADWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621ADWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621ADWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621ADWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621ADWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS621AN ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS621ANE4 ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) Call TI SN74ALS623A-1DW OBSOLETE SOIC DW 20 TBD Call TI Call TI SN74ALS623A-1DWR OBSOLETE SOIC DW 20 TBD Call TI Call TI SN74ALS623A-1N OBSOLETE PDIP N 20 TBD Call TI Call TI SN74ALS623ADW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS623ADWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS623ADWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74ALS623AN ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74ALS623AN3 OBSOLETE PDIP N 20 TBD Call TI Addendum-Page 1 Call TI PACKAGE OPTION ADDENDUM www.ti.com 11-Nov-2009 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74ALS623ANE4 ACTIVE PDIP N 20 SN74ALS623ANSR ACTIVE SO NS 20 SN74ALS623ANSRE4 ACTIVE SO NS SN74ALS623ANSRG4 ACTIVE SO SN74AS623DW OBSOLETE SN74AS623DWR SN74AS623N 20 Pb-Free (RoHS) Lead/Ball Finish MSL Peak Temp (3) CU NIPDAU N / A for Pkg Type 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SOIC DW 20 TBD Call TI Call TI OBSOLETE SOIC DW 20 TBD Call TI Call TI OBSOLETE PDIP N 20 TBD Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 29-Jul-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74ALS621ADWR SOIC DW 20 2000 330.0 24.4 10.8 13.0 2.7 12.0 24.0 Q1 SN74ALS623ANSR SO NS 20 2000 330.0 24.4 8.2 13.0 2.5 12.0 24.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 29-Jul-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74ALS621ADWR SOIC DW 20 2000 346.0 346.0 41.0 SN74ALS623ANSR SO NS 20 2000 346.0 346.0 41.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP(R) Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2009, Texas Instruments Incorporated