MCMX Series * SIP SSR * Ratings to 5A @ 60 VDC, 10A @ 60 VDC and 6A @ 100 VDC * MOSFET output * DC control * Low on-state impedance PRODUCT SELECTION Control Voltage 3-10 VDC 5A 6A 10A MCMX60D5 MCMX100D6 MCMX60D10 0-60 100 5 0 .10 60 0.5 0-100 100 6 0 .040 100 0.24 0-60 100 (4) 10 0 .018 100 0.18 OUTPUT SPECIFICATIONS (1)(3) Description Operating Voltage [VDC] Maximum Off-State Leakage Current @ Rated Voltage [Adc] Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum On-State Resistence [Ohm] (2) Maximum Surge Current (10msec) [Apk] Maximum On-State Voltage Drop @ Rated Current [VDC] INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typycal Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [sec] 3.0-10.0 VDC 3.0 VDC 1 .0 VDC 15 mAdc 300 Ohm 1.0 300 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation GENERAL NOTES 1) 2) 3) 4) All parameters at 25C unless otherwise noted. Dielectric and insulation resistance are measured between input and output. Inductive loads should be diode suppressed. At 55 Vdc. Parameters 2500 Vrms 109 Ohm 15 pF -40 to 80C -40 to 125C 0.7 oz. (20g) Thermally Conductive Epoxy MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS UL/cUL E116950 (6 and 10A models only) Rev. 120210 ANNEX - ENVIROMENTAL INFORMATION