TOLERANCE 0-2.99 M = +100.0/25.0mm 3-8.99 M +150.0/25.0mm 9-14.99 M +300.0/-25.0mm 15-OVER M = +450.0/-25.0mm LENGTH (Mx) REVISIONS REV ECO DESCRIP TION DATE BY APPR 01 PRELIMINARY 14AUG15 CHELSEA| KING a WIRING DIAGRAM P41 DRAIN WIRE Smee 12.7MM REF. RED 20AWG X BLACK roawon ao w qd GF WHITE 20AWG 4 FACE VIEW TECHNICAL DATA: 1) MATERIALS: COUPLING NUT: THERMOPLASTIC, NYLON, UL94 V-0 INSULATION INSERT: THERMOPLASTIC, NYLON, UL 94V-0 CONTACT: GOLD FLASH PLATING OVER COPPER ALLOY SEAL:EPDM,RED PREMOLD MATERIAL: HOTMELT; OVERMOLD MATERIAL: THERMOPLASTIC, PVC COLOR: GRAY CABLE, 1P*20AWG, SIGNAL PAIR, DOUBLE FOAM-PE INSULATOR, 1P*20AWG, POWER PAIR, PVC INSULATOR AND NYLON COATED; CABLE RATING: 80C, 300V; CABLE JACKET MATERIAL: PVC FIXED INSTALLATION BENDING RADIUS : 7*OD 2) ELECTRICAL DATA: CURRENT (MAX): 4A VOLTAGE (MAX): 300V DIELECTRIC TEST VOLTAGE: 500V 3) MECHANICAL DATA: TEMPERATURE RANGE: -40C TO 80C PROTECTION: IP67 (MATED CONDITION) MATING CYCLES: >100 4) RoHS COMPLIANT 5 x BLUE roawe X iv) iv) 1 FACE VIEW LABEL DETAI: CLEAR VINYL SECTION AN-NOSPS-Mx DOM: YYMMDD LOT: Amphenol Sine Systems VOLTS: 300 AMPS: 4 Risk of Eloctrical Shock Do Not Disconnect Under Load. Risque de chocs electiques No pas dabrancher sous fansion. customer drawing YEAR MONTH DAY PRODUCT ORDER NUMBER TALI | A1avO SJIWANAS OL SIVA ZILA PARTNUMBER __| DESCRIPTION | | 10 | | as [LO naa | XWN-SdSON-WYV con onc | [ITEM QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) All di are in SIGNATURES DATE 2) Tolerances are as follows: Fractions +1/64 Angles 1 3 PL DEC 30.08 3) Nota reference = LN MATERIAL SPECIFICATIONS: NOTED PROCESS SPECIFICATIONS: NEXT ASSY: DRAWN: FLAN 14AUG15 (CHECKED: CHELSEA 14AUG15 Amphenol ENGINEER: APPROVAL: KING 14AUG15 Sine Systems - www.amphenoksine.com 44724 Morley Drive Clinton Township, MI 48036 CUSTOMER: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY, DESIGN FEATURES, M12 MALE TO FEMALE CABLE MANUFACTURING VARIATIONS. SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL. DIMENSIONS ARE SUBJECT TO NORMAL DATA |sUF TYPE A4|C- DWG NO: AM-NOSPS-Mx REVISION 01 SENONE AM-NOSPS-Mx_ [sieer 1 oF 4