Document Number: 93286 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 03-Nov-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1
Schottky Rectifier, 2 x 6 A
VS-12CWQ04FN-M3
Vishay Semiconductors
FEATURES
Low forward voltage drop
Guard ring for enhanced ruggedness and long
term reliability
Halogen-free according to IEC 61249-2-21
definition
Popular D-PAK outline
Center tap configuration
Small foot print, surface mountable
High frequency operation
Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
Compliant to RoHS Directive 2002/95/EC
DESCRIPTION
The VS-12CWQ04FN-M3 surface mount, center tap,
Schottky rectifier series has been designed for applications
requiring low forward drop and small foot prints on PC
board. Typical applications are in disk drives, switching
power supplies, converters, freewheeling diodes, battery
charging, and reverse battery protection.
PRODUCT SUMMARY
Package D-PAK (TO-252AA)
IF(AV) 2 x 6 A
VR40 V
VF at IF0.48 V
IRM 40 mA at 125 °C
TJ max. 150 °C
Diode variation Common cathode
EAS 9 mJ
Base
common
cathode
Common
cathode
2
4
13
Anode Anode
D-PAK (TO-252AA)
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) Rectangular waveform 12 A
VRRM 40 V
IFSM tp = 5 μs sine 550 A
VF6 Apk, TJ = 125 °C (per leg) 0.48 V
TJRange - 55 to 150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL VS-12CWQ04FN-M3 UNITS
Maximum DC reverse voltage VR40 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average
forward current
See fig. 5
per leg
IF(AV) 50 % duty cycle at TC = 134 °C, rectangular waveform
6
A
per device 12
Maximum peak one cycle
non-repetitive surge current
See fig. 7
IFSM
5 μs sine or 3 μs rect. pulse Following any rated
load condition and with
rated VRRM applied
550
A
10 ms sine or 6 ms rect. pulse 90
Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 1.5 A, L = 8 mH 9 mJ
Repetitive avalanche current per leg IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical 1.2 A
www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 93286
2DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 03-Nov-10
VS-12CWQ04FN-M3
Vishay Semiconductors Schottky Rectifier, 2 x 6 A
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
Note
(1) thermal runaway condition for a diode on its own heatsink
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward
voltage drop per leg
See fig. 1
VFM (1)
6 A TJ = 25 °C 0.53
V
12 A 0.68
6 A TJ = 125 °C 0.48
12 A 0.64
Maximum reverse
leakage current per leg
See fig. 2
IRM (1)
TJ = 25 °C
VR = Rated VR
3
mA
TJ = 125 °C 40
Threshold voltage VF(TO) TJ = TJ maximum 0.28 V
Forward slope resistance rt25.58 m
Typical junction capacitance per leg CTVR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C 405 pF
Typical series inductance per leg LSMeasured lead to lead 5 mm from package body 5.0 nH
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and srorage
temperature range TJ (1), TStg - 55 to 150 °C
Maximum thermal resistance,
junction to case
per leg RthJC
DC operation
See fig. 4
3.0 °C/W
per device 1.5
Approximate weight 0.3 g
0.01 oz.
Marking device Case style D-PAK (similar to TO-252AA) 12CWQ04FN
dPtot
dTJ
------------- 1
RthJA
--------------<
Document Number: 93286 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 03-Nov-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 3
VS-12CWQ04FN-M3
Schottky Rectifier, 2 x 6 A Vishay Semiconductors
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
1
10
100
IF - Instantaneous Forward
Current (A)
VFM - Forward Voltage Drop (V)
0.4 0.8 1.2 2.2
1.41.00.6
0.2
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
0 1.6 1.8 2.0
IR - Reverse Current (mA)
VR - Reverse Voltage (V)
0 102030
0.001
0.1
1
10
100
540
0.01
352515
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 50 °C
TJ = 25 °C
CT - Junction Capacitance (pF)
VR - Reverse Voltage (V)
02030
40 45
100
1000
10
TJ = 25 °C
515
25 35
ZthJC - Thermal Impedance (°C/W)
0.01
0.1
1
10
t1 - Rectangular Pulse Duration (s)
0.00001 0.0001 0.001 0.01 0.1 1
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
Single pulse
(thermal resistance)
PDM
t1
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
www.vishay.com For technical questions within your region, please contact one of the following: Document Number: 93286
4DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Revision: 03-Nov-10
VS-12CWQ04FN-M3
Vishay Semiconductors Schottky Rectifier, 2 x 6 A
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
Allowable Case Temperature (°C)
IF(AV) - Average Forward Current (A)
0894
115
125
130
140
150
155
26
DC
See note (1)
Square wave (D = 0.50)
80 % rated VR applied
1357
120
135
145
0
Average Power Loss (W)
IF(AV) - Average Forward Current (A)
046 9
1
2
3
4
5
28
RMS limit
DC
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
1357
I
FSM
- Non-Repetitive Surge Current (A)
t
p
- Square Wave Pulse Duration (µs)
100
1000
10 100 1000 10 000
At any rated load condition
and with rated V applied
following surge RRM
10
Document Number: 93286 For technical questions within your region, please contact one of the following: www.vishay.com
Revision: 03-Nov-10 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 5
VS-12CWQ04FN-M3
Schottky Rectifier, 2 x 6 A Vishay Semiconductors
ORDERING INFORMATION TABLE
ORDERING INFORMATION (Example)
PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION
VS-12CWQ04FN-M3 75 3000 Antistatic plastic tube
VS-12CWQ04FNTR-M3 2000 2000 13" diameter reel
VS-12CWQ04FNTRL-M3 3000 3000 13" diameter reel
VS-12CWQ04FNTRR-M3 3000 3000 13" diameter reel
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95016
Part marking information www.vishay.com/doc?95176
Packaging information www.vishay.com/doc?95033
2- Current rating (12 A)
3- Center tap configuration-
4
4- Package identifier:
W = D-PAK
5- Schottky “Q” series
6- Voltage rating (04 = 40 V)
7- FN = TO-252AA
8- None = Tube
TR = Tape and reel
TRL = Tape and reel (left oriented)
TRR = Tape and reel (right oriented)
1- Vishay Semiconductors product
- Environmental digit:
-M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
9
Device code
51 32 4 6 7 8 9
VS- 12 C W Q 04 FN TRL -M3
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 05-Dec-12 1Document Number: 95016
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
D-PAK (TO-252AA)
DIMENSIONS in millimeters and inches
Notes
(1) Dimensioning and tolerancing as per ASME Y14.5M-1994
(2) Lead dimension uncontrolled in L5
(3) Dimension D1, E1, L3 and b3 establish a minimum mounting surface for thermal pad
(4) Section C - C dimension apply to the flat section of the lead between 0.13 and 0.25 mm (0.005 and 0.10") from the lead tip
(5) Dimension D, and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at
the outermost extremes of the plastic body
(6) Dimension b1 and c1 applied to base metal only
(7) Datum A and B to be determined at datum plane H
(8) Outline conforms to JEDEC outline TO-252AA
SYMBOL MILLIMETERS INCHES NOTES SYMBOL MILLIMETERS INCHES NOTES
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
A 2.18 2.39 0.086 0.094 e 2.29 BSC 0.090 BSC
A1 - 0.13 - 0.005 H 9.40 10.41 0.370 0.410
b 0.64 0.89 0.025 0.035 L 1.40 1.78 0.055 0.070
b2 0.76 1.14 0.030 0.045 L1 2.74 BSC 0.108 REF.
b3 4.95 5.46 0.195 0.215 3 L2 0.51 BSC 0.020 BSC
c 0.46 0.61 0.018 0.024 L3 0.89 1.27 0.035 0.050 3
c2 0.46 0.89 0.018 0.035 L4 - 1.02 - 0.040
D 5.97 6.22 0.235 0.245 5 L5 1.14 1.52 0.045 0.060 2
D1 5.21 - 0.205 - 3 Ø 10° 10°
E 6.35 6.73 0.250 0.265 5 Ø1 15° 15°
E1 4.32 - 0.170 - 3 Ø2 25° 35° 25° 35°
Ø 1
E
(5)
b3 (3) 0.010 CAB
L3 (3)
B
AC
H
C
L2
D (5)
L4
b
2 x e
b2
(2) L5
123
4
Ø 2
A
c2 A
A
H
Seating
plane
c
Detail “C”
(7)
Seating
plane
A1
Detail “C”
Rotated 90 °CW
Scale: 20:1
(L1)
C
C
L
Ø
Gauge
plane
Lead tip
M
0.010 CAB
M
32
4
1
E1
D1
MIN.
0.265
(6.74)
MIN.
0.245
(6.23)
MIN.
0.089
(2.28)
MIN.
0.06
(1.524)
0.488 (12.40)
0.409 (10.40)
0.093 (2.38)
0.085 (2.18)
Pad layout
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.