SURFACE MOUNT DISPLAY APSC56-21EWA HIGH EFFICIENCY RED Features Description !0.56INCH The High Efficiency Red source color devices are DIGIT HEIGHT. !LOW CURRENT OPERATION. made with Gallium Arsenide Phosphide on Gallium !EXCELLENT Phosphide Orange Light Emitting Diode. CHARACTER APPEARANCE. !I.C. COMPATIBLE !MECHANICALLY RUGGED. !GRAY FACE,WHITE SEGMENT. !PACKAGE:800PCS/ REEL. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change whitout notice. SPEC NO: DSAC1676 APPROVED : J. Lu REV NO: V.1 CHECKED : Joe Lee DATE: DEC/16/2002 DRAWN: X.T.HU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e HIGH EFFICIENCY RED (GaAsP/GaP) APSC56-21EWA Iv (u c d ) @ 10 m A L en s Ty p e WHITE DIFFUSED D es c r i p t i o n Min . Ty p . 1200 7400 Common Cathode,Rt. Hand Decimal Un its Tes t Co n d it io n s Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er peak Peak Wavelength High Efficiency Red 627 nm I F =20mA D Dominate Wavelength High Efficiency Red 625 nm I F =20mA 45 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V 1/2 D ev i c e Spectral Line Half-width High Efficiency Red Ty p . C Capacitance High Efficiency Red 15 VF Forward Voltage High Efficiency Red 2.0 IR Reverse Current High Efficiency Red Max . Absolute Maximum Ratings at TA=25C P ar am et er H i g h E f f i c i en c y R ed Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC1676 APPROVED : J. Lu REV NO: V.1 CHECKED : Joe Lee DATE: DEC/16/2002 DRAWN: X.T.HU PAGE: 2 OF 4 High Efficiency Red SPEC NO: DSAC1676 APPROVED : J. Lu APSC56-21EWA REV NO: V.1 CHECKED : Joe Lee DATE: DEC/16/2002 DRAWN: X.T.HU PAGE: 3 OF 4 APSC56-21EWA SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAC1676 APPROVED : J. Lu REV NO: V.1 CHECKED : Joe Lee DATE: DEC/16/2002 DRAWN: X.T.HU PAGE: 4 OF 4