Data Sheet AD8538/AD8539
Rev. B | Page 3 of 24
SPECIFICATIONS
AD8538 ELECTRICAL SPECIFICATIONS
@ VS = 5.0 V, VCM = 2.5 V, VO = 2.5 V, TA = 25°C, unless otherwise specified.
Table 1.
Parameter Symbol Conditions Min Typ Max Unit
INPUT CHARACTERISTICS
Offset Voltage VOS 5 13 µV
−40°C ≤ TA ≤ +125°C 30 µV
Input Bias Current IB 15 25 pA
−40°C ≤ TA ≤ +85°C 35 100 pA
−40°C ≤ TA ≤ +125°C 0.7 1.0 nA
Input Offset Current IOS 20 50 pA
−40°C ≤ TA ≤ +125°C 150 pA
Input Voltage Range 0 5 V
Common-Mode Rejection Ratio CMRR VCM = 0 V to 5 V 115 150 dB
−40°C ≤ TA ≤ +125°C, VCM = 0.2 V to 4.8 V 100 135 dB
Large Signal Voltage Gain AVO RL = 10 kΩ, VO = 0.1 V to 4.9 V 115 141 dB
−40°C ≤ TA ≤ +125°C 110 135 dB
Offset Voltage Drift ∆VOS/∆T −40°C ≤ TA ≤ +125°C 0.03 0.1 µV/°C
OUTPUT CHARACTERISTICS
Output Voltage High VOH RL = 100 kΩ to ground 4.99 4.998 V
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to ground 4.98 V
RL = 10 kΩ to ground 4.95 4.970 V
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to ground 4.94 V
Output Voltage Low VOL RL = 100 kΩ to V+ 1.9 5 mV
−40°C ≤ TA ≤ +125°C, RL = 100 kΩ to V+ 2.8 7 mV
RL = 10 kΩ to V+ 17 20 mV
−40°C ≤ TA ≤ +125°C, RL = 10 kΩ to V+ 20 30 mV
Short-Circuit Limit ISC ±25 mA
Power Supply Rejection Ratio PSRR VS = 2.7 V to 5.0 V 105 125 dB
−40°C ≤ TA ≤ +125°C 100 125 dB
Supply Current/Amplifier ISY IO = 0 150 180 µA
−40°C ≤ TA ≤ +125°C 190 215 µA
DYNAMIC PERFORMANCE
Slew Rate SR RL =10 kΩ 0.4 V/µs
Settling Time 0.01% tS G = ±1, 2 V step, CL = 20 pF, RL = 1 kΩ 10 μs
Overload Recovery Time 0.05 ms
Phase Margin ØM RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF 65 Degrees
NOISE PERFORMANCE
Voltage Noise en p-p f = 0.1 Hz to 10 Hz 2.0 µV p-p
Voltage Noise Density en f = 1 kHz 50 nV/√Hz