Ordering number:ENN1036B PNP/NPN Epitaxial Planar Silicon Darlington Transistors 2SB883/2SD1193 Driver Applications Applications Package Dimensions * Motor drivers, printer hammer drivers, relay drivers, voltage regulator control. unit:mm 2022A [2SB883/2SD1193] Features 15.6 14.0 3.2 4.8 3.5 2.0 1.3 1.2 15.0 20.0 2.6 * High DC current gain. * High current capacity and wide ASO. * Low saturation voltage. 1.6 20.0 2.0 0.6 1.0 2 3 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3PB 1.4 1 0.6 ( ) : 2SB883 5.45 Specifications 5.45 Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO (-)70 V Collector-to-Emitter Voltage VCEO VEBO (-)60 V (-)6 V IC (-)15 A Collector Current (Pulse) ICP (-)20 A Collector Dissipation 70 W Junction Temperature PC Tj 150 C Storage Temperature Tstg -55 to +150 C Emitter-to-Base Voltage Collector Current Tc=25C Electrical Characteristics at Ta = 25C Parameter Symbol Conditions Collector Cutoff Current ICBO VCB=(-)40V, IE=0 Emitter Cutoff Current IEBO VEB=(-)5V, IC=0 DC Current Gain hFE fT VCE=(-)2V, IC=(-)7A Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage VCE(sat) Ratings min 2000 typ (-)0.1 mA (-)3 mA 20 0.9 IC=(-)7A, IB=(-)14mA Unit 5000 VCE=(-)5V, IC=(-)7A VBE(sat) IC=(-)7A, IB=(-)14mA V(BR)CBO IC=(-)5mA, IE=0 V(BR)CEO IC=(-)50mA, RBE= max MHz (-)1.5 (-)1.0 V V (-)2.0 V (-)70 V (-)60 V Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1002AS (KT)/91098HA (KT)/10996TS (KOTO) 8-4525/4027KI/D222KI No.1036-1/4 2SB883/2SD1193 Electrical Connection C C B B 6k 200 2SB883 E E 2SD1193 IC -- VCE --20 --16 --12 --3mA --2mA --8 IC -- VCE 20 2SB883 From top --10mA --9mA --8mA --7mA --6mA --5mA --4mA 2SD1193 Collector Current, IC - A Collector Current, IC - A 6k 200 --4 From top 10mA 9mA 8mA 7mA 6mA 16 12 5mA 4mA 3mA 8 4 IB=0 0 0 --1 --2 --3 0 --5 Collector-to-Emitter Voltage, VCE - V 1 2 3 4 5 Collector-to-Emitter Voltage, VCE - V ITR08563 IC -- VCE --8 IB=0 0 --4 IC -- VCE 10 2SB883 ITR08564 2SD1193 --6 --0.9mA --1.0mA --5 Collector Current, IC - A Collector Current, IC - A --7 --0.8mA --0.7mA --0.6mA --4 --0.5mA --3 --0.4mA --2 --0.3mA 8 1.1mA 1.0mA 0.9mA 0.8mA 0.7mA 0.6mA 6 4 0.5mA 0.4mA 2 0.3mA --1 IB=0 0 0 --1 --2 --3 --4 Collector-to-Emitter Voltage, VCE - V 0 3 4 5 ITR08566 2SD1193 VCE=2V 16 Collector Current, IC - A Collector Current, IC - A 2 IC -- VBE 20 2SB883 VCE= --2V --16 --12 --8 --4 0 --0.6 1 Collector-to-Emitter Voltage, VCE - V ITR08565 IC -- VBE --20 IB=0 0 --5 --1.0 --1.4 --1.8 --2.2 Base-to-Emitter Voltage, VBE - V --2.6 ITR08567 12 8 4 0 0.6 1.0 1.4 1.8 2.2 Base-to-Emitter Voltage, VBE - V 2.6 ITR08568 No.1036-2/4 2SB883/2SD1193 hFE -- IC 3 C 20 1 Ta= 25 3 C C --40 2 1000 7 5 25 2 0 --4 1000 C 7 5 2 100 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC - A 2 3 VCE(sat) -- IC 2SB883 IC / IB=500 3 2 --10 7 5 3 2 25C Ta= --40C 7 120C 5 3 --0.1 3 5 7 --1.0 2 3 5 7 1.0 2 3 5 7 2 10 ITR08570 2SD1193 IC / IB=500 3 2 10 7 5 3 2 1.0 7 Ta= --40C 25C 120C 5 3 2 --10 7 5 3 Ta= --40C 25C 3 120C 5 7 1.0 2 3 5 5 7 10 2 ITR08572 VBE(sat) -- IC 2SD1193 IC / IB=500 7 5 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 7 2 100 7 2 7 0.1 Collector Current, IC - A 2SB883 IC / IB=500 3 2 10 7 5 3 Ta= --40C 2 25C 1.0 120C 7 5 3 2 3 5 7 2 --1.0 3 5 7 5 2 --10 ITR08573 Collector Current, IC - A IC=-16A Collector Current, IC - A io n s --1.0 at 0m er 10 op 5 3 2 --0.1 5 7 2 1.0 3 5 7 2 10 ITR08574 2SD1193 IC=16A 10 m 5 s D 3 2 C s C 3 2 3 1m s m 10 D 2 ICP=20A 10 5 0.1 ASO 3 2 2SB883 1m s 7 Collector Current, IC - A ASO ICP=-20A --10 5 5 7 --10 2 ITR08571 VBE(sat) -- IC 3 2 3 Collector Current, IC - A 3 2 --100 3 --0.1 2 VCE(sat) -- IC 5 Collector Current, IC - A --1.0 7 0.1 100 7 Collector-to-Emitter Saturation Voltage, VCE (sat) - V 5 --1.0 5 ITR08569 7 Collector-to-Emitter Saturation Voltage, VCE (sat) - V C C 3 3 --100 Collector Current, IC - A 0 12 = Ta 5 2 5 Base-to-Emitter Saturation Voltage, VBE (sat) - V 10000 7 3 100 2SD1193 VCE=2V 2 DC Current Gain, hFE DC Current Gain, hFE 2 10000 7 5 hFE -- IC 3 2SB883 VCE= --2V op 10 er 1.0 0m at s io n 5 3 2 0.1 5 5 Tc=25C 1ms to 100ms : single pulse 3 2 2 3 5 7 --10 Tc=25C 1ms to 100ms : single pulse 3 2 2 3 5 Collector-to-Emitter Voltage, VCE - V 7 --100 ITR08575 2 3 5 7 10 2 3 5 Collector-to-Emitter Voltage, VCE - V 7 100 ITR08576 No.1036-3/4 2SB883/2SD1193 PC -- Tc 80 Collector Dissipation, PC - W 70 60 50 40 30 20 10 0 0 20 40 60 80 100 120 Case Temperature, Tc - C 140 160 ITR08577 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2002. Specifications and information herein are subject to change without notice. PS No.1036-4/4