LM431
LM431 Adjustable Precision Zener Shunt Regulator
Literature Number: SNVS020F
LM431
September 2, 2010
Adjustable Precision Zener Shunt Regulator
General Description
The LM431 is a 3-terminal adjustable shunt regulator with
guaranteed temperature stability over the entire temperature
range of operation. The output voltage may be set at any level
greater than 2.5V (VREF) up to 36V merely by selecting two
external resistors that act as a voltage divided network. Due
to the sharp turn-on characteristics this device is an excellent
replacement for many zener diode applications.
Features
Average temperature coefficient 50 ppm/°C
Temperature compensated for operation over the full
temperature range
Programmable output voltage
Fast turn-on response
Low output noise
Connection Diagrams
TO-92: Plastic Package
1005501
Top View
SO-8: 8-Pin Surface Mount
1005502
Top view
SOT-23: 3-Lead Small Outline
1005528
Top View
Note: NC = Not internally connected.
© 2010 National Semiconductor Corporation 10055 www.national.com
LM431 Adjustable Precision Zener Shunt Regulator
Ordering Information
Package Typical Accuracy Order Number/Package Marking Temperature
Range
Transport
Media
NSC
Drawing
0.5% 1% 2%
TO-92 LM431CCZ/
LM431CCZ
LM431BCZ/
LM431BCZ
LM431ACZ/
LM431ACZ 0°C to +70°C
Rails Z03A
LM431CIZ/
LM431CIZ
LM431BIZ/
LM431BIZ
LM431AIZ/
LM431AIZ −40°C to +85°C
SO-8 LM431CCM/
431CCM
LM431BCM/
431BCM
LM431ACM/
LM431ACM 0°C to +70°C
Rails
M08A
LM431CCMX/
431CCM
LM431BCMX/
431BCM
LM431ACMX/
LM431ACM Tape & Reel
LM431CIM/
431CIM
LM431BIM/
431BIM
LM431AIM/
LM431AIM −40°C to +85°C
Rails
LM431CIMX/
431CIM
LM431BIMX/
431BIM
LM431AIMX/
LM431AIM Tape &Reel
SOT-23 LM431CCM3/
N1B
LM431BCM3/
N1D
LM431ACM3/
N1F 0°C to +70°C
Rails
MF03A
LM431CCM3X/
N1B
LM431BCM3X/
N1D
LM431ACM3X/
N1F Tape & Reel
LM431CIM3
N1A
LM431BIM3
N1C
LM431AIM3
N1E −40°C to +85°C
Rails
LM431CIM3X
N1A
LM431BIM3X
N1C
LM431AIM3X
N1E Tape &Reel
Symbol and Functional Diagrams
1005599
1005555
www.national.com 2
LM431
DC Test Circuits
1005504
FIGURE 1. Test Circuit for VZ = VREF
1005505
Note: VZ = VREF (1 + R1/R2) + IREF• R1
FIGURE 2. Test Circuit for VZ > VREF
1005506
FIGURE 3. Test Circuit for Off-State Current
3 www.national.com
LM431
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Storage Temperature Range −65°C to +150°C
Operating Temperature Range
Industrial (LM431xI) −40°C to +85°C
Commercial (LM431xC) 0°C to +70°C
Soldering Information
Infrared or Convection (20 sec.) 235°C
Wave Soldering (10 sec.) 260°C (lead temp.)
Cathode Voltage 37V
Continuous Cathode Current −10 mA to +150 mA
Reference Voltage −0.5V
Reference Input Current 10 mA
Internal Power Dissipation (Note 2,
Note 3)
TO-92 Package
SO-8 Package
SOT-23 Package
0.78W
0.81W
0.28W
Operating Conditions
Min Max
Cathode Voltage VREF 37V
Cathode Current 1.0 mA 100 mA
LM431 Electrical Characteristics
TA = 25°C unless otherwise specified
Symbol Parameter Conditions Min Typ Max Units
VREF Reference Voltage VZ = VREF, II = 10 mA 2.440 2.495 2.550 V
LM431A (Figure 1 )
VZ = VREF, II = 10 mA 2.470 2.495 2.520 V
LM431B (Figure 1 )
VZ = VREF, II = 10 mA 2.485 2.500 2.510 V
LM431C (Figure 1 )
VDEV Deviation of Reference Input Voltage Over VZ = VREF, II = 10 mA, 8.0 17 mV
Temperature (Note 4) TA = Full Range (Figure 1 )
Ratio of the Change in Reference Voltage IZ = 10 mA VZ from VREF to 10V −1.4 −2.7 mV/V
to the Change in Cathode Voltage (Figure 2 ) VZ from 10V to 36V −1.0 −2.0
IREF Reference Input Current R1 = 10 kΩ, R2 = , 2.0 4.0 μA
II = 10 mA (Figure 2 )
∝IREF Deviation of Reference Input Current over R1 = 10 kΩ, R2 = ,
Temperature II = 10 mA, 0.4 1.2 μA
TA = Full Range (Figure 2 )
IZ(MIN) Minimum Cathode Current for Regulation VZ = VREF (Figure 1 ) 0.4 1.0 mA
IZ(OFF) Off-State Current VZ = 36V, VREF = 0V (Figure 3) 0.3 1.0 μA
rZDynamic Output Impedance (Note 5) VZ = VREF, LM431A, 0.75 Ω
Frequency = 0 Hz (Figure 1 )
VZ = VREF, LM431B, LM431C 0.50 Ω
Frequency = 0 Hz (Figure 1 )
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device
beyond its rated operating conditions.
Note 2: TJ Max = 150°C.
Note 3: Ratings apply to ambient temperature at 25°C. Above this temperature, derate the TO-92 at 6.2 mW/°C, the SO-8 at 6.5 mW/°C, the SOT-23 at 2.2 mW/
°C.
Note 4: Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference input voltage over the full temperature range.
www.national.com 4
LM431
1005507
The average temperature coefficient of the reference input voltage, ∝VREF, is defined as:
Where:
T2 − T1 = full temperature change (0-70°C).
∝VREF can be positive or negative depending on whether the slope is positive or negative.
Example: VDEV = 8.0 mV, VREF = 2495 mV, T2 − T1 = 70°C, slope is positive.
Note 5: The dynamic output impedance, rZ, is defined as:
When the device is programmed with two external resistors, R1 and R2, (see Figure 2 ), the dynamic output impedance of the overall circuit, rZ, is defined as:
Equivalent Circuit
1005503
5 www.national.com
LM431
Typical Performance Characteristics
Input Current vs VZ
1005529
Thermal Information
1005530
Input Current vs VZ
1005531
Dynamic Impedance vs Frequency
1005509
Stability Boundary Conditions
1005511
Note: The areas under the curves represent conditions that may cause the de-
vice to oscillate. For curves B, C, and D, R2 and V+ were adjusted to establish
the initial VZ and IZ conditions with CL = 0. V+ and CL were then adjusted to de-
termine the ranges of stability.
1005510
www.national.com 6
LM431
Test Circuit for Curve A Above
1005512
Test Circuit for Curves B, C and D Above
1005513
Typical Applications
Shunt Regulator
1005514
Single Supply Comparator with
Temperature Compensated Threshold
1005515
7 www.national.com
LM431
Series Regulator
1005516
Output Control of a Three
Terminal Fixed Regulator
1005517
Higher Current Shunt Regulator
1005518
www.national.com 8
LM431
Crow Bar
1005519
Over Voltage/Under Voltage
Protection Circuit
1005520
9 www.national.com
LM431
Voltage Monitor
1005521
Delay Timer
1005522
Current Limiter or Current Source
1005523
www.national.com 10
LM431
Constant Current Sink
1005524
11 www.national.com
LM431
Physical Dimensions inches (millimeters) unless otherwise noted
8-Pin SOIC
NS Package Number M08A
SOT-23 Molded Small Outline Transistor Package (M3)
NS Package Number MF03A
www.national.com 12
LM431
NS Package Number Z03A
13 www.national.com
LM431
Notes
LM431 Adjustable Precision Zener Shunt Regulator
For more National Semiconductor product information and proven design tools, visit the following Web sites at:
www.national.com
Products Design Support
Amplifiers www.national.com/amplifiers WEBENCH® Tools www.national.com/webench
Audio www.national.com/audio App Notes www.national.com/appnotes
Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns
Data Converters www.national.com/adc Samples www.national.com/samples
Interface www.national.com/interface Eval Boards www.national.com/evalboards
LVDS www.national.com/lvds Packaging www.national.com/packaging
Power Management www.national.com/power Green Compliance www.national.com/quality/green
Switching Regulators www.national.com/switchers Distributors www.national.com/contacts
LDOs www.national.com/ldo Quality and Reliability www.national.com/quality
LED Lighting www.national.com/led Feedback/Support www.national.com/feedback
Voltage References www.national.com/vref Design Made Easy www.national.com/easy
PowerWise® Solutions www.national.com/powerwise Applications & Markets www.national.com/solutions
Serial Digital Interface (SDI) www.national.com/sdi Mil/Aero www.national.com/milaero
Temperature Sensors www.national.com/tempsensors SolarMagic™ www.national.com/solarmagic
PLL/VCO www.national.com/wireless PowerWise® Design
University
www.national.com/training
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION
(“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY
OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO
SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS,
IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT.
TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT
NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL
PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR
APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND
APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE
NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS.
EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO
LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE
AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected
to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.
National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other
brand or product names may be trademarks or registered trademarks of their respective holders.
Copyright© 2010 National Semiconductor Corporation
For the most current product information visit us at www.national.com
National Semiconductor
Americas Technical
Support Center
Email: support@nsc.com
Tel: 1-800-272-9959
National Semiconductor Europe
Technical Support Center
Email: europe.support@nsc.com
National Semiconductor Asia
Pacific Technical Support Center
Email: ap.support@nsc.com
National Semiconductor Japan
Technical Support Center
Email: jpn.feedback@nsc.com
www.national.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright ©2011, Texas Instruments Incorporated