NOTE: Waveforms & Test Circuits on pages 48, 49
Standard Specifications for product indicated in color
A 0 to 70 °C
B-20 to 70 °C
C -40 to 85 °C
D -10 to 50 °C
E-10 to 60 °C
F -30 to 60 °C
J0 to 50 °C
X - Custom
Temp. Range
27
1 NC or Tri-State
7 Case Ground
8 Output
14 Supply Voltage (Vdd)
Pin Function
PIN FUNCTION TABLE
FULL SIZE 14 PIN DIP
Parameter Specification
SPECIFICATIONSSPECIFICATIONS
PART NUMBERING SYSTEMPART NUMBERING SYSTEM
FMOC71FMOC71 0000 AA 3 S T 3 S T - - XXXXX.XXXXXXMX.XXXXXXM - - CMCM
00 - ± 100 ppm
50 - ± 50 ppm
25 - ± 25 ppm
20 - ± 20 ppm
nn - ± Custom Value
3 - +3.3 Vdc Supply Voltage (Vdd)
S - Tight Symmetry
(45/55%) Duty Cycle
T - Tri-State
BLANK - None Required (Std.)
Overall Frequency Tol.
Specification Options
Frequency (MHz)
HCMOS/TTL Compatible
5.0 Vdc Clock Osc.
via Multiplier
Full-Size 14 Pin DIP
Product Family
15302 Bolsa Chica St., Huntington Beach, CA. 92649
Tel.: 714-892-3234 Fax: 714-890-1832
E-mail: sales@frequencymanagement.com
www.frequencymanagement.com
1-800-800-XTAL
(9825)
GW - Gull Wing
PD - Parameter Data
CM - Custom Mark
BLANK-None Req’d.
Options
0.600
(15.24)
0.200
(5.08)
MAX.
0.515
(13.08)
MAX.
0.815
(20.7)
MAX.
1
14
0.022
(0.55)
0.300
(7.62)
0.300
(7.62)
7
8
Insulated
Stand-Offs
0.250
(6.35)
MAX.
0.022
(0.56)
FMOC71 SERIES
5.0 Vdc Clock Oscillators
14 PIN DIP
•High Frequency via Multiplier*
•3.3 Vdc Supply Voltage Option
•HCMOS/TTL Compatible
•Lower Cost*
Frequency Range 60.0 to 160.0 MHz (100MHz max @ +3.3 Vdd)
Overall Frequency Tolerance ±20 ppm to ±100 ppm
(Inclusive of Operating Temp., Supply Voltage, & Load)
Operating Temperature Range 0 to +70°C Std. (See Temp. Range Options)
Storage Temperature -55 to +125°C
Supply Voltage (Vdd) +5.0 Vdc (±0.5 Vdc) or +3.3 Vdc (±0.3 Vdc)
Supply Current (Icc) 30 mA max. @ 6 0.0 to 99.9 MHz
50 mA max. @ 100.0 to 149.9 MHz
60 mA max. @ 150.0 to 160 .0 MHz
Symmetry (Duty Cycle) 40/60% Std., 45/55% Avail. (See Spec. Option S)
Output “O” Level (VOL)0.4 Vdc max. (TTL)
0.5 Vdc max. (HCMOS) (0.3 Vdc max @ +3.3 Vdd)
Output “1” Level (VOH)2.4 Vdc min. (TTL)
4.5 Vdc min. (HCMOS) (3.0 Vdc min @ +3.3 Vdd)
Rise and Fall Time 10 ns max. < 5 ns typical
Start Time 10 ms max. < 5 ms typical
Output Load 10 TTL / 15 pF HCMOS
Jitter (typical) < 25 pico seconds, one sigma
Phase Noise (typical) 10 Hz -75dBc/Hz
100 Hz -105dBc/Hz
1kHz -100dBc/Hz
10kHz -90dBc/Hz
100kHz -95dBc/Hz
1MHz -120dBc/Hz
Pin 1 Options No Connect (Std.)
(See Spec. Option TT below) Tri-State (option TT)
VIH: 2.2 V or Open Enables Output
VIL: 0.8 V Disables Output
Output Disable/Enable Time: 100 nS max.
Aging @ 25°C±5ppm max first year
MARKING: See Page 57, Format GMARKING: See Page 57, Format G
Dimensions:
Inches
(mm)
//
* All specifications for 5.0 Vdc supply voltage unless otherwise noted.
All specifications subject to change without notice.
