SII9134CTU - Silicon Image - Datasheet.World

Data Brief

SiI9135/SiI9235A HDMI Receiver with

Enhanced Audio and Deep Color Outputs

Data Brief

Document # SiI-DB-0206-F01

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Silicon Image, Inc.

April, 2010

information (including trad e secrets, copyright, and other interests) of Silicon Image, Inc. You may not use these

materials except only fo r your bona fide non-commercial e valuation of your poten tial purchase of products and /or

services from Silicon Image or its affiliates, and/or only in connection with your purchase of products and/or services

from Silicon Image or its affiliates, and only in accordance with the terms and conditions herein. You have no right to

copy, modify, transfer, sublicense, publicly display, create derivative works of or distribute these materials, or otherwise

make these materials available, in whole or in part, to any third party.

Patents

The subject matter described herein contains one or more inventions claimed in patents and / or patents pending owned

by Silicon Image, Inc., including but not limited to the inventions claimed in US patents #6,914 ,637, #6,151,334,

#6,026,124, #5,974,464 and #5,825,824.

Trademark Acknow ledgment

Silicon Image™, VastLane™, SteelVine™, PinnaClear™, Simplay™, Simplay HD™, Satalink™, InstaPort™,

TMDS™, and LiquidHD™ are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other

countries. HDMI®, the HDMI logo and High-Definition Multimedia Interface™ are trademarks or registered trademarks

of, and are used under license from, HDMI Licensing, LLC. x.v.Color™ is a trademark of Sony Corporation.

Export Controlled Document

This document contains informati on subject to t he Export Adm inist ration Regulations (EAR ) and has a classification of

EAR99 or is controll ed for Anti -Terrorism (AT) purp oses. Transfer of this informati on by any means to an EAR Count ry

Group E:1 or foreign national thereof (whether in the U.S. or abroad) may require an export license or other approval from

the U.S. Department of Commerce. For more information, contact the Silicon Image Director of Global Trade Compliance.

Further Information

To request other materials, detailed hardware and software guides, and additional info rmation, contact your local Silicon

Image, Inc. sales office or visit the Silicon Image, Inc. web site at www.siliconimage.com. Information about obtaining

licenses required for using HDMI and HDCP technologies is available from www.hdmi.org and www.digital-cp.com.

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Introduction

The SiI9135/SiI9235A HDM I Receiver with Enhanced

Audio and Deep Color Outputs is a second-generation

dual-input High Definition Multimedia Interface (HDMI)

receiver. It is software-compatible with the SiI9133

receiver, but adds audio support for DTS-HD and Dolby

TrueHD. Digital televisions that can display 10- or 12-bit

color depth can now provide the highest quality protected

digital audio and video over a single cable. The SiI9135

and SiI9135A devices, which are functionally identical,

can receive Deep Color video up to 12-bit, 1080p @ 60

Hz. Backward compatibility with the DVI 1.0

specification all ows HDM I sy stem s to connect to existi ng

DVI 1.0 hosts, such as HD set-top boxes and PCs. Silicon

Image HDM I receive rs use the latest ge neration T ransition

Minimized Differential Signaling (TMDS) core

technology that runs at 25–225 MHz.

The chip comes pre-programmed with High-bandwidth

Digital Content Protection (HDCP) keys for receiving

protected audio and video content. This set of keys

simplifies the manufacturing process and lowers costs

while providing the highest level of HDCP key

security.

The SiI9135/SiI9135A receiver can send and receive up

to eight channels of uncompressed di gital audi o at

192 kHz and 2-channel digit al audio up to 192 kHz.

Compressed streams are also suppo rted through ei ther

the S/PDIF port or over I2S for DTS-HD and Dolby

TrueHD. An industry-standard I2S port allows direct

connection to low-cost audio DACs at up to 192 kHz. An

S/PDIF port supports up to 192 kHz audi o. The devi ce

supports Super Audio Compact Disc (SAC D) and

provides Direct Stream Digital (DSD) p orts that support

44.1 and 88.2-kHz one-bit audio.

A low-power standby feature of the SiI9135/SiI9135A

receiver enables flexible power management.

Digital Video Interface

• Flexible support for many different standard- and

high-definition vid eo formats (36-bit RGB /

YCbCr 4:4: 4 , 16/20/24-bit YCbC r 4: 2:2, 8/10/12-

bit YCbCr 4: 2:2 (ITU BT.656))

• 12/15/18-bit Digital Multimedia Output (DMO)

RGB/YCbCr 4:4:4 (clocked with rising and falling

edges)

• Color Space Conversion for both RGB-to-YCbCr

and YCbCr-to-RGB (both 601 and 709)

• True 12-bit accurate dat a usi n g 14 - bi t proces si ng

• Auto video mode configuration simplifies system

firmware design

Digital Audio Interface

• DTS-HD and Dolby TrueHD high bit rate audio

• Four I2S inputs accept Dolby Digital, DVD-Audio

input (2-ch an nel 192 kHz and 8-channel 192 kHz)

• S/PDIF input supports PCM, Dolby Digital, DTS

digital audio transmission (32–192 kHz Fs sample

rate)

• IEC60958 or IEC61937 compatible

• Flexible, programmable I2S channel mapping

HDCP Decryption

• Pre-programmed HDCP keys provide the highest

level of key security, simplify manufacturing, and

lower cost

• Full support for HDCP repeaters (up to 16 attached

downstream devices)

Package

• 20 mm x 20 mm 144-pin TQFP package with ePad™

Figure 1. Typical Application of SiI9135/SiI9135A Receiver

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Silicon Image, Inc.

System Applications

The SiI9135/SiI9135A receiver is designed for AV receivers that require support for HDMI Deep Color and the latest

audio technologies: DTS-HD and Dolby TrueHD. The receiver allows receiving 10/12-bit color depth up to 1080p

resolutions. A si ngl e device provides tw o H DM I inp ut po rts. The video o utp ut goes to a video process o r or HDMI

transmitter. Besides DTS-HD and Dolby TrueHD, the device supports full surround so und audio including DVD -Audio

and SACD. The audio output can go directly to an audio DAC or an audio digital signal processor for further processing.

Comparing the SiI9135/SiI9135A Receiver with the SiI9033 and SiI9133

Receivers

Table 1 summarizes the functional differences among the SiI9033, the SiI9133, and the SiI9135/SiI9135A receivers.

Table 1. Summary of New Features

Feature SiI9033 SiI9133 SiI9135/SiI9135A

HDMI Input Connections

TMDS Input Ports 2 2 2

Color Depth 8-bit 8/10/12-bit 8/10/12-bit

DDC Input Ports 2 2 2

Maximum TMDS Input Clock 165 MHz 225 MHz 225 MHz

Output Ports

Digital Video Output Ports 1 1 1

Maximum Output Pixel Clock 165 MHz. 165 MHz. 165 MHz.

Maximum Output Bus Width 24 36 36

Analog Video Output Ports 0 0 0

S/PDIF Output Ports 1 1 1

2S Output 8 channel 8 channel 8 channel

DSD Output 8 channel 8 channel 6 channel

Video Processing

Color Space Converter RGB to/from YcbCr RGB to/from YcbCr RGB to/from YcbCr

Pixel Clock Divider 0.25, 0.5 0.25, 0.5 0.25, 0.5

Digital Video Bus Mapping swap Cb, Cr pins swap Cb, Cr pins swap Cb, Cr pins

Maximum Audio Sample Rate (Fs)

2-channel (I2S or S/PDIF) 192 kHz 192 kHz 192 kHz

8-channel (I2S) 192 kHz 192 kHz 192 kHz

8-channel (DSD) 88.2 kHz 88.2 kHz 88.2 kHz (6 channel)

High Bit Rate Audio Support

Compressed DTS-HD and

Dolby True-HD

No No Yes

Other Features

MCLK Generation No external connection

required. No external Connection

required No external connection

required.

HDCP Repeater Support Yes Yes Yes

Interlaced Format Detection Pin Yes Yes Yes

TMDS REXT_SWING Not Used Not Used Not Used

Package 144-pin TQFP ePad 404-pin BGA w/Heat

Slug 144-pin TQFP ePad

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Silicon Image, Inc.

Pin Diagrams

Figure 2 shows the SiI9135/SiI9135A pin assignments of the receiver. Pin names are generalized by type for this

document. The list below the diagram describes the purpose of each type. The package is a 20 mm x 20 mm 144-pin

TQFP with an ePad.

Figure 2. Pin Diagram

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Silicon Image, Inc.

Packaging

ePad Enhancement

The SiI9135/SiI9135A receiver is packaged in a 144-pin TQFP package with an ePad™. The ePad dimensions are

shown in Figure 3.

144 37

73108

109

Pin 1

Identifier

361

Silicon Image recommends that the ePad be soldered to the PCB and electrically

grounded on the PCB. The ePad must not be conne c t e d to any other voltage

level.

ePad Dimensions: Amkor and SPIL

Item Description Typ Max

T1 ePad height 4.60 4.64

T2 ePad width 5.20 5.24

ePad Dimensions: ASE

Item Description Typ Max

T1 ePad height 5.25 5.29

T2 ePad width 5.25 5.29

All dimensions are in millimeters.

The ePad is centered on the package center

lines. The measurement tolerance is

±0.04 mm for all manufacturers. The ePad

tab dimensions may vary.

A clearance of at least 0.25 mm should be

provided on the PCB between the edge of

the ePad and the inner edges of the lead

pads to avoid the possibility of electrical

shorts.

Figure 3. ePad Diagram

PCB Layout Guidelines

PCB layout designers shoul d refer to Sil icon Image application note PCB Layout Gui delines: Designing w ith Exposed Pads

for basic design guidelines when designing with thermally enhanced packages using the Exposed Pad.

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Silicon Image, Inc.

144-pin TQFP Package Dimensions

JEDEC Package Code MS-026-AFB

Item Description Min Typ Max Item Description Min Typ Max

A Thickness 1.00 1.10 1.20

b Lead width 0.17 0.22 0.27

A1 Stand-off 0.05 0.10 0.15

C Lead thickness 0.09 — 0.20

A2 Body thickness 0.95 1.00 1.05

e Lead pitch 0.50 BSC

D Footprint 22.00 BSC L Lead foot length 0.45 0.60 0.75

E Footprint 22.00 BSC L1 Total lead length 1.00 REF

D1 Body size 20.00 BSC R1 Lead radius, inside 0.08 — —

E1 Body size 20.00 BSC R2 Lead radius, outside 0.08 — 0.20

D2 Lead Row Width 17.5 BSC S Lead horizontal run 0.20 — —

E2 Lead Row Width 17.5 BSC

Dimensions in millimeters.

Overall thickness A = A1 + A2.

Figure 4. Package Diagram

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Silicon Image, Inc.

Marking Specification

Drawing is not to scale and pin count shown is representative. Refer to specifics in Figure 4 on page 5.

Legend Description

LNNNNN.NLLL Lot number

YY Year of manufacture

WW Week of manufactu re

TTTTTT Trace code

M Maturity code

Figure 5. Marking Di agram

The universal package may be used in lead-free and ordinary process lines

Ordering Information

Production Part Numbers: TMDS Input Clock Range Part Number

25–225 MHz SiI9135CTU

25–225 MHz SiI9135ACTU

SiI9135/SiI9235A HDMI Receiver with Enhanced Audio and Deep Color Outputs

Data Brief

Silicon Image, Inc.

Disclaimers

These materials are provided on an “AS IS” basis. Silicon Image, Inc. and its affiliates disclaim all representations and

warranties (express , implied, statut ory or otherwise ), including but not limited to: (i) all implied warranties of

merchantability, fitness for a particular purpose, and/or non-infringement of third party rights; (ii) all warranties arising

out of course-of-dealing, usage, and/or trade; and (iii) all warranties that the information or results provided in, or that

may be obtained from use of, the materials are accurate, reliable, complete, up-to-date, or produce specific outcomes.

Silicon Image, Inc. and its affiliates assume no liability or responsibility for any errors or omissions in these materials,

makes no commitment or warranty to correct any such errors or omissions or update or keep current the information

contained in these materials, and expressly disclaims all direct, indirect, special, incidental, consequential, reliance and

punitive damages, including WITHOUT LIMITATION any loss of profits arising out of your access to, use or

interpretation of, or actions taken or not taken based on the content of these materials.

Silicon Image, Inc. and its affiliates reserve the right, without notice, to periodically modify the information in these

materials, and to add to, d elete, and/or change any of this information.

Notwithstanding the foregoing, these materials shall not, in the absence of authorization under U.S. and local law and

regulations, as required, be used by or exported or re-exported to (i) any U.S. sanctioned or embargoe d country, or to

nationals or residents of such countries; or (ii) any person, entity, organization or other party identified on the U.S.

Department of Commerce's Denied Persons or Entity List, the U.S. Department of Treasury's Specially Designated

Nationals or Blocked Persons List, or the Department of State's Debarred Parties List, as published and revised from

time to time; (iii) any party engaged in nuclear, chemical/biological weapons or missile proliferation activities; or (iv)

any party for use in the design, development, or production of rocket systems or unmanned air vehicles.

Products and Services

The products and services described in these materials, and any other information, services, designs, know-h ow and/or

products provided by Silicon Image, Inc. and/or its affiliates are provided on as “AS IS” basis, except to the extent that

Silicon Image, Inc. and/or its affiliates provides an applicable written limited warranty in its standard form license

agreements, standard Terms and Conditions of Sale and Service or its other applicable standard form agreements, in

which case such limited warranty shall apply and shall go vern in lieu of all other warranties (express, statutory, or

implied). EXCEPT FOR SUCH LIMITED WARRANTY, SILICON IMAGE, INC. AND ITS AFFILIATES

DISCLAIM ALL REPRESENTATIONS AND WA RRANTIES (EXPRESS, IMPLIED, STATUTORY OR

OTHERWISE), REGARDING THE INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS

PROVIDED BY SILICO N IM AGE, INC. AND/OR ITS AFF ILIATES, INCLUDING BUT NOT LIMITED TO, ALL

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND/OR NON-

INFRINGEMENT OF THIRD PARTY RIGHTS. YOU ACKNOWLEDGE AND AGREE THAT SUCH

INFORMATION, SERVICES, DESIGNS, KNOW-HOW AND PRODUCTS HAVE NOT BEEN DESIGNED,

TESTED, OR MANUFACTURED FOR USE OR RESALE IN SYSTEMS WHERE THE FAILURE,

MALFUNCTION , OR AN Y IN ACCURACY OF THESE ITEMS CARR IES A RIS K O F DE AT H OR SERIO US

BODILY INJURY, INCLUDING, BUT NOT LIMITED TO, USE IN NUCLEAR FACILITIES, AIRCRAFT

NAVIGATION OR COMMUNICATION , EM ERGE NCY SYSTEMS, OR OTHER SYSTEMS WITH A SIMILAR

DEGREE OF POTENTIA L HAZARD. NO PERSON IS AUTHORIZED TO M AKE ANY OTHER WARR AN TY OR

REPRESENTATION CONCERNING THE PERFORMANCE OF THE INFORMATION, PRODUCTS, KNOW-

HOW, DESIGNS OR SERVICES OTHER THAN AS PROVIDED IN THESE TERMS AND CONDITIONS.

1060 E. Arques Avenue

Sunnyvale, CA 94085

T 408.616.4000 F 408.830.9530