J08031A0000 - Telegartner, Inc.

order number: J08031A0000

MT-RJ Jack for fibre 50/125

Technical Attributes

Description MT-RJ Jack for fibre 50/125

Installation Snap-in mounting

Product description

Telegärtner FO connectors are equipped with ceramic ferrules and split sleeves which are essential for

precision and endurance; termination to cables or fibres may be carried out using common tools and

accessories. The preformed convex front end of the connector ferrule provides extremely short polishing

duration and exceptional optical performance. All FO connectors comply with the current international

standards.

The T-ST3 type provides an internal strain relief, which avoids signal interruption when pulling the cable

(N.O.D.). For Plastic Fibres (POF) with 1 mm fibre diameter an economical metal connector is available

providing extremely quick assembly using simple accessories without adhesive.

The current requirements to achieve in FO applications the same port density as with RJ45 connectors have

led to newly developed FO connector systems named SFF (= Small Form Factor). Telegärtner offers the

connector types MT-RJ and LC within this system. The space requirements in panels or outlets are only half of

those required by common connector types such as ST or SC.

Telegärtner offers a complete range of components within this system: FO connectors, jacks for outlets

prepared for direct field termination of fibres, adaptors, patch cables, adaptor cables, outlets with guaranteed

bending radii and suitable for standard switching programs, patch panels with and without telescope operation

as well as wall boxes in differerent sizes.

The SC/APC connector type (Angled Physical Contact) with 8° angled polished ferrule end face has been

developed for transmission lines with particular high return loss requirements for better than 60 dB. The

connectors are available as pigtails or cable assemblies, the connector and adapter housings are green for

easy identification.

Schlagwort

FO components

MT-RJ Jack for fibre 50/125

Telegärtner FO connectors are equipped with ceramic ferrules and split sleeves which are essential for

1 / 6

Lerchenstr. 35, D-71144 Steinenbronn, Tel. +49 (0) 7157 125 100, Fax +49 (0) 7157 125 120, E-Mail: info@telegaertner.com

precision and endurance; termination to cables or fibres may be carried out using common tools and

accessories. The preformed convex front end of the connector ferrule provides extremely short polishing

duration and exceptional optical performance. All FO connectors comply with the current international

standards.

The T-ST3 type provides an internal strain relief, which avoids signal interruption when pulling the cable

(N.O.D.). For Plastic Fibres (POF) with 1 mm fibre diameter an economical metal connector is available

providing extremely quick assembly using simple accessories without adhesive.

The current requirements to achieve in FO applications the same port density as with RJ45 connectors

have led to newly developed FO connector systems named SFF (= Small Form Factor). Telegärtner offers

the connector types MT-RJ and LC within this system. The space requirements in panels or outlets are

only half of those required by common connector types such as ST or SC.

Telegärtner offers a complete range of components within this system: FO connectors, jacks for outlets

prepared for direct field termination of fibres, adaptors, patch cables, adaptor cables, outlets with

guaranteed bending radii and suitable for standard switching programs, patch panels with and without

telescope operation as well as wall boxes in differerent sizes.

The SC/APC connector type (Angled Physical Contact) with 8° angled polished ferrule end face has been

developed for transmission lines with particular high return loss requirements for better than 60 dB. The

connectors are available as pigtails or cable assemblies, the connector and adapter housings are green

for easy identification.

427

613

L_90089