www.vishay.com
64
M10, M11, M12, M25
Vishay Draloric
Document Number 20028
Revision 24-Jul-02
For Technical Questions, contact: ff2aresistors@vishay.com
FEATURES
• Metal film layer on high quality ceramic
• Protective top coat
• SnPb contacts on Ni barrier layer
• Excellent stability at different environmental conditions
• Low TC and tight tolerances
• Extremly humidity resistant (HAST - Test)
Thin Film, Rectangular, Resistor Chips
M12 25 562R .5% P5
MODEL TC RESISTANCE VALUE TOLERANCE PACKAGING
ppm / K Ω± % P5-Papertape 5000 pcs
MODEL SIZE POWER RATING W70°CLIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE E-SERIES
INCH METRIC CECC EIA VOLTAGE MAX COEFFICIENT RANGE
40401-801 575 V 쓖ppm/K % Ω
M10 0402 1005 0.063 0.063 25 25 / 50 0.5, 1 10R – 20K*)24 - 96
M11 0603 1608 0.1 0.063 75 25 0.1, 0.25, 10R – 56K*)
0.5, 1 24 - 96
50 0.1, 0.25, 0.5, 10R – 56K*)
1 1R0 – 100K*)
M12 0805 2012 0.125 0.1 150 25 0.1, 0.25 10R – 100K*)
0.5, 1 24 - 96
50 0.1, 0.25, 0.5 10R – 100K*)
1 1R0 – 220K*)
M25 1206 3216 0.25 0.125 200 25 0.1, 0.25 10R – 220K*)
0.5, 1 24 - 96
50 0.1, 0.25, 0.5, 10R – 220K*)
1 1R0 – 330K*)
STANDARD ELECTRICAL SPECIFICATIONS
ORDERING INFORMATION
* Higher values on request, ask about extended value ranges
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
• Marking: 4 digits, M10 - no marking
TECHNICAL SPECIFICATIONS
PARAMETER UNIT M10 M11 M12 M25
Rated Dissipation at 70°C W 0.063 0.1 0.063 0.125 0.1 0.25 0.125
(CECC 40401 | EIA 575)
Limiting Element Voltage
2)
V쓖25 75 150 200
Insulation Voltage (1 min) V
dc/ac peak
> 50 > 100 > 200 > 300
Thermal Resistance
1)
K/W ≤ 870
1)
-≤ 550
1)
–≤ 440
1)
–≤ 220
1)
-
Insulation Resistance Ω> 10
9
Category Temperature Range
°C - 55 / + 125 (+ 155)
Failure Rate h
–1
0.3 •10
–9
Weight / 1000pcs g 0.65 2 5.5 10
1) Measuring conditions in acc. with CECC 40401 2) Rated voltage: PxR
www.vishay.com
65
M10, M11, M12, M25
Vishay Draloric
Document Number 20028
Revision 24-Jul-02
For Technical Questions, contact: ff2aresistors@vishay.com
Thin Film, Rectangular, Resistor Chips
SIZE DIMENSIONS [in millimeters]
INCH METRIC L W H T1 T2
0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.1 0.2 ± 0.1
0603 1608 1.55 0.85 ± 0.1 0.45 ± 0.05 0.30 ± 0.2 0.3 ± 0.2
0805 2012 2.0 1.25 ± 0.15 0.45 ± 0.05 0.30 0.3 ± 0.2
1206 3216 3.2 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2
+ 0.10
– 0.05
+ 0.20
– 0.10
+ 0.20
– 0.10
DIMENSIONS
PACKAGING
MODEL REEL
PACKAGING CODE
TAPE WIDTH DIAMETER PIECES / REEL
PAPER BLISTER
M10 8mm 180mm / 7" 10000 P0
Papertape 330mm / 13"2) 50000 PZ
180mm / 7" 1000* P1 B1
M11 to M25 8mm 180mm / 7" 5000 P5 B5
Paper-/Blistertape1) 255mm / 10" 10000 P0
330mm / 13" 20000 PN BN
1) only in combination with 180mm/7" and 330mm/13" plastic reel
2) plastic reel
• further information about packaging: see appropriate catalog or web page
* For ≤ TC25 and Tol ≤ 0.1% only
+ 0.10
– 0.20
Derating
120
100
80
60
40
20
0
- 55 -25 0 25 50 75 100 125 150 175
Ambient Temperature in °C
Rated Power In %
70
Temperature Rise
90
80
70
60
50
40
30
20
10
00 0.1 0.2 0.3 0.4 0.5
Power in W
Temperature Rise In °C
0402 1206
0805
0603
SIZE REFLOW SOLDERING WAVE SOLDERING
INCH METRIC a b l a b l
0402 1005 0.4 0.6 0.5
0603 1608 0.5 0.9 1.0 0.9 0.9 1.0
0805 2012 0.7 1.4 1.2 0.9 1.3 1.3
1206 3216 0.9 1.7 2.0 1.1 1.7 2.3
SOLDER PAD DIMENSIONS [in millimeters]
www.vishay.com
66
M10, M11, M12, M25
Vishay Draloric
Document Number 20028
Revision 24-Jul-02
For Technical Questions, contact: ff2aresistors@vishay.com
60
40
20
0
-20
-40
-60
-80 2 5 10 50 100 500 1000
HF Performance
Phase Angle in ϑϑ
ϑϑ
ϑ˚
HF Performance
Phase Angle in ϑϑ
ϑϑ
ϑ˚
Frequency f in MHz
60
40
20
0
-20
-40
-60
-80 2 5 10 50 100 500 1000
Frequency f in MHz
120
110
100
90
80
70
60 10 100 1K 10K 100K
Non-Linearity
Non-Linearity A
3
in dB
Resistance Value in Ω
M12
3K
1K
100
10
Test Voltage in V
10R 100R 1K 10K 100K
Single-Pulse High Voltage Overload Test
1.2 / 50µs EN140000 4.27
Resistance Value in Ω
M11
60
40
20
0
-20
-40
-60
-80
HF Performance
[Z]-RO in %
RO
2 5 10 50 100 500 1000
Frequency f in MHz
M12
60
40
20
0
-20
-40
-60
-80
10Ω
100Ω
1KΩ
10KΩ
[Z]-RO in %
RO
2 5 10 50 100 500 1000
HF Performance Frequency f in MHz
3
2
1
100 1K 10K 100K 1M
Current Noise
Current Noise in µV/V
Resistance Value in Ω
0.5
0.3
0.1
0.01
0.03
0.05
3K
1K
100
10
Test Voltage in V
10R 100R 1K 10K 100K
Single-Pulse High Voltage Overload Test
10 / 700µs EN140000 4.27
Resistance Value in Ω
M25
M12
M11
M10
M11
10Ω
100Ω
1KΩ
4.75KΩ
10KΩ
M12
1KΩ
10Ω
100Ω
10KΩ
M12
M11
M11
10Ω
100Ω
1KΩ
4.75KΩ
10KΩ
M10 M11
M25
M12
Thin Film, Rectangular, Resistor Chips
www.vishay.com
67
M10, M11, M12, M25
Vishay Draloric
Document Number 20028
Revision 24-Jul-02
For Technical Questions, contact: ff2aresistors@vishay.com
APPLICABLE SPECIFICATIONS
• CECC40000 / 40400 / 40401-801
• EN140400 / IEC 60115 – 1
PERFORMANCE
TEST CONDITIONS OF TEST TEST RESULTS
TOLERANCES
0.1% / 0.25% 0.5% / 1.0%
Endurance Test at 70°C 1000 hours at 70°C, 1.5 hours “ON”, 0.5 hours “OFF” ≤ ± 0.2% ≤ ± 0.5%
IEC 60115-1 4.25.1
Endurance at UCT 1000 hours at 125 °C without load ≤ ± 0.2% ≤ ± 0.5%
IEC 60115-1 4.25.3
Overload Test Short time overload for 2 seconds ≤ ± 0.05% ≤ ± 0.1%
IEC 60115-1 4.13 2.5 x rated voltage or ≤ 2 x limiting element voltage
Thermal Shock Rapid change between upper and lower ≤ ± 0.05% ≤ ± 0.1%
IEC 60115-1 4.19, IEC 60068-2-14 category temperature
Damp Heat Steady State 56 days at 40°C and 93% relative humidity ≤ ± 0.2% ≤ ± 0.5
IEC 60115-1 4.24, IEC 60068-2-3
Resistance to Soldering Heat 10 seconds at 260°C solder bath temperature ≤ ± 0.05% ≤ ± 0.2
IEC 60115-1 4.18, IEC 60068-2-20
M25
100
10
1
0.1
0.01
Power Rating P in W
10-5 10-4 10-3 10-2 10-1 110
Square Pulse ti in s
Pulse Rating P 0
Secondary conditions:
a) P 0 (peak pulse, single pulse)
b) ϑu ≤ 70°C
c) Ûmax see diagram (Max pulse voltage)
1000
800
600
400
200
0
Pulse Voltage Û
max
in V
10-5 10-4 10-3 10-2 10-1 110
Square Pulse ti in s
Maximum Pulse Voltage
Secondary conditions:
a) P see diagram (Pulse Rating)
b) ϑu ≤ 70°C
100
10
1
0.1
0.01
Power Rating P in W
10-5 10-4 10-3 10-2 10-1 110
Square Pulse ti in s
Pulse Rating P ≤P70
Secondary conditions:
a) P ≤ P70 (permissible constant power at ϑu = 70°C)
b) ϑu ≤ 70°C
c) Ûmax see diagram (Max. pulse voltage)
M12
M11
M10
M25
M12
M11
M10
M25
M12
M11
M10
Thin Film, Rectangular, Resistor Chips
