For capacitance of more than 1000µF add 0.02 for every increase of 1000µF.
ALUMINUM ELECTROLYTIC CAPACITORS
FGseries
High Grade Standard Type, For Audio Equipment
Type numbering system (Example : 10V 47
µ
F)
Specifications
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem –40 to +85°C
6.3 to 100V
0.1 to 10000µF
±20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) , whichever is greater.
Printed with black color letter on gold sleeve.
Measurement frequency : 120Hz
The specifications listed at right
shall be met when the
capacitors are restored to 20°C
after the rated voltage is applied
for 1000 hours at 85°C.
After storimg the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Rated voltage (V)
tan δ (MAX.)
6.3
0.22 10
0.19 16
0.16 25
0.14 35
0.12 50
0.10 63
0.09 80
0.09 100
0.08
Z–25°C / Z+20°C
Z–40°C / Z+20°C
Rated voltage (V)
Impedance ratio
ZT / Z20 (MAX.)
6.3
4
8
10
3
6
16
2
4
25
2
4
35
2
3
50
2
3
63
2
3
80
2
3
100
2
3
Capacitance change
Leakage current
tan δ
Within ±20% of the initial measurement for units of not more than 16V or φ6.3
Within ±15% of the initial measurement for units of not less than 25V or above φ6.3
150%or less than the initial specified value
Less than or equal to the initial specified value
Measurement frequency : 120Hz, Temperature : 20°C
"Fine Gold" MUSE acoustic series suited for high grade
audio equipment, using state of the art etching techniques.
Rich sound in the bass register and clearer high end, most
suited for AV equipment like DVD, MD.
Compliant to the RoHS directive (2002/95/EC).
Radial Lead Type
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
FG
KZ
High Grade High Grade
Dimension table in next page.
FW
• Please refer to page 20 about the end seal configulation.
CAT.8100Z