2007-04-02 Silicon PIN Photodiode with Daylight Blocking Filter Silizium-PIN-Fotodiode mit Tageslichtsperrfilter Version 1.0 SFH 225 FA Features: * * * * Besondere Merkmale: Especially suitable for applications of 880 nm Short-switching time (typ. 20 ns) 5 mm LED plastic package Also available on tape and reel * * * * Applications Speziell geeignet fur Anwendungen bei 880 nm Kurze Schaltzeit (typ. 20 ns) 5 mm-Plastikbauform im LED-Gehause Auch gegurtet lieferbar Anwendungen * Photointerrupters * IR remote control of hi-fi and TV sets, video tape recorders, dimmers, remote controls of various equipment * Lichtschranken * IR-Fernsteuerung von Fernseh- und Rundfunkgeraten, Videorecordern, Lichtdimmern, Geratefernsteuerungen Ordering Information Bestellinformation Type: Photocurrent Ordering Code Typ: Fotostrom Bestellnummer = 870 nm, Ee = 1 mW/cm2, VR = 5 V IP [A] SFH 225 FA 2007-04-02 34 ( 25) Q62702P1051 1 Version 1.0 SFH 225 FA Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating and storage temperature range Betriebs- und Lagertemperatur Top; Tstg -40 ... 100 C Reverse voltage Sperrspannung VR 20 V Total power dissipation Verlustleistung Ptot 150 mW Characteristics (TA = 25 C) Kennwerte Parameter Symbol Bezeichnung Symbol Photocurrent Fotostrom (VR = 5 V, Ee = 1 mW/cm2 , = 870 nm) IP Wavelength of max. sensitivity Wellenlange der max. Fotoempfindlichkeit Values Werte Unit Einheit 34 ( 25) A S max 900 nm Spectral range of sensitivity Spektraler Bereich der Fotoempfindlichkeit 10% 740 ... 1120 nm Radiant sensitive area Bestrahlungsempfindliche Flache A Dimensions of radiant sensitive area Abmessung der bestrahlungsempfindlichen Flache LxW Half angle Halbwinkel 60 Dark current Dunkelstrom (VR = 10 V) IR 2 ( 30) Spectral sensitivity of the chip Spektrale Fotoempfindlichkeit des Chips ( = 870 nm) S typ 0.65 A/W Quantum yield of the chip Quantenausbeute des Chips ( = 870 nm) 0.93 Electro ns /Photon 2007-04-02 2 4.84 mm2 2.2 x 2.2 mm x mm nA Version 1.0 SFH 225 FA Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Open-circuit voltage Leerlaufspannung (Ee = 0.5 mW/cm2, = 870 nm) VO 330 ( 250) mV Short-circuit current Kurzschlussstrom (Ee = 0.5 mW/cm2, = 870 nm) ISC 17 A Rise and fall time Anstiegs- und Abfallzeit (VR = 5 V, RL = 50 , = 850 nm, Ip = 800 A) tr, tf 0.02 s Forward voltage Durchlassspannung (IF = 100 mA, E = 0) VF 1.3 V Capacitance Kapazitat (VR = 0 V, f = 1 MHz, E = 0) C0 48 pF Temperature coefficient of VO Temperaturkoeffizient von VO TCV -2.6 mV / K Temperature coefficient of ISC Temperaturkoeffizient von ISC ( = 870 nm) TCI 0.1 %/K Noise equivalent power Rauschaquivalente Strahlungsleistung (VR = 10 V, = 870 nm) NEP 0.039 pW / Hz1/2 Detection limit Nachweisgrenze (VR = 10 V, = 870 nm) D* 5.6e12 cm x Hz1/2 / W 2007-04-02 3 Version 1.0 SFH 225 FA Photocurrent / Open-Circuit Voltage Fotostrom / Leerlaufspannung IP (VR = 5 V) / VO = f(Ee) Relative Spectral Sensitivity Relative spektrale Empfindlichkeit Srel = f() OHF01430 100 P Srel % 80 OHF01056 10 3 A 10 4 mV VO 10 2 10 3 70 VO 60 10 1 50 10 2 40 P 30 10 0 10 1 20 10 0 400 600 800 10 -1 10 0 1000 nm 1200 10 1 W/cm2 10 2 10 0 10 4 Ee Dark Current Dunkelstrom IR = f(VR), E = 0 Total Power Dissipation Verlustleistung Ptot = f(TA) OHF00394 160 mW Ptot 140 OHF00080 4000 R 120 pA 3000 100 80 2000 60 40 1000 20 0 2007-04-02 0 20 40 60 0 80 C 100 TA 4 0 5 10 15 V VR 20 Version 1.0 SFH 225 FA Capacitance Kapazitat C = f(VR), f = 1 MHz, E = 0 Dark Current Dunkelstrom IR = f(VR), E = 0 OHF02284 10 2 nA R 10 1 10 0 10 -1 0 2 4 6 8 10 12 14 16 V 20 VR Dark Current Dunkelstrom IR = f(TA), VR = 10 V, E = 0 OHF00082 10 3 R nA 10 2 10 1 10 0 10 -1 2007-04-02 0 20 40 60 80 C 100 TA 5 Version 1.0 SFH 225 FA Directional Characteristics Winkeldiagramm Srel = f() 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 0.8 0.6 0.4 0 20 40 60 80 Package Outline Mazeichnung 1.1 (0.043) 0.7 (0.028) 1.2 (0.047) 5.1 (0.201) 4.6 (0.181) 0.75 (0.030) 0.45 (0.018) 0.4 (0.016) 1.8 (0.071) 0.6 (0.024) 2.54 (0.100) spacing 35.5 (1.398) 33.5 (1.319) 3.8 (0.150) 7.2 (0.283) 6.6 (0.260) 3.1 (0.122) 2.6 (0.102) Cathode Photosensitive area Surface not flat GEOY6422 Dimensions in mm (inch). / Mae in mm (inch). 2007-04-02 0.5 (0.020) 0.3 (0.012) 6 100 120 Version 1.0 SFH 225 FA Package 5mm Radial (T 1 3/4), Epoxy Gehause 5mm Radial (T 1 3/4), Harz 4.8 (0.189) Recommended Solder Pad Empfohlenes Lotpaddesign TTW Soldering / Wellenloten (TTW) 4 (0.157) OHLPY985 Dimensions in mm (inch). / Mae in mm (inch). 2007-04-02 7 Version 1.0 SFH 225 FA TTW Soldering Wellenloten (TTW) IEC-61760-1 TTW / IEC-61760-1 TTW OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2007-04-02 8 s 250 Version 1.0 SFH 225 FA Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2007-04-02 9 Version 1.0 SFH 225 FA Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2007-04-02 10