Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Overview The low ESR, surge-robust T495 is designed for demanding applications that require high surge current and high ripple current capability. The T495 builds upon the proven capabilities of our industrial grade tantalum chip capacitors to offer several advantages such as low ESR, high ripple current capability, excellent capacitance stability, and improved resistance to high in-rush currents. These benefits are achieved through a combination of proprietary design, materials, and process parameters, as well as high-stress, low impedance electrical conditioning performed prior to screening.The T495 is classified as moisture sensitivity level (MSL) 1 under J STD 020, with unlimited floorlife time at 30C/85% RH. Benefits * * * * * * * * * * * * * Meets or exceeds EIA Standard 535BAAC Taped and reeled per EIA 481 High surge current capability Optional gold-plated terminations High ripple current capability 100% surge current test on B, C, D, E, U, V, and X sizes 100% steady-state accelerated aging Capacitance values of 0.1 to 1,000 F Tolerances of 10% and 20% Voltage rating of 2.5 - 50 VDC Extended range values RoHS compliant and lead-free terminations Operating temperature range of -55C to +125C Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Applications Typical applications include decoupling and filtering in automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder, Gold-plated or Non-magnetic 100% Sn solder. One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 1 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 495 X 107 Capacitor Class Series Case Size Capacitance Code (pF) A, B, C, D, E, M, T, U, V, W, X First two digits represent significant figures. Third digit specifies number of zeros. T= Tantalum Surge Robust Low ESR M 010 A Capacitance Rated Voltage Failure Rate/ Tolerance (VDC) Design K = 10% M = 20% 2R5 = 2.5 004 = 4 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 A = N/A T E045 Termination Finish ESR T = 100% Matte tin (Sn)-plated H = Standard solder coated (SnPb 5% Pb minimum) G = Gold-plated (A, B, C, D, X only) N = Non-magnetic 100% tin (Sn) M = Non-magnetic (SnPb) Packaging (C-Spec) E = ESR Blank = 7" reel last three 7280 = 13" reel digits specify ESR in m (45 = 45 m) Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.47 - 1,000 F at 120 Hz/25C K tolerance (10%), M tolerance (20%) 2.5 - 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 2 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Qualification Test Condition Characteristics C/C Endurance 85C at rated voltage, 2,000 hours. 125C at 2/3 rated voltage, 2,000 hours. Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Storage Life 125C at 0 volts, 2,000 hours. Temperature Stability MIL-STD-202, Method 107, Condition B, mounted, -55C to 125C, 1,000 cycles. Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C. Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Mechanical Shock/ Vibration Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL C/C Surge Voltage Within 10% of initial value DF C/C Thermal Shock Within 10% of initial value DF 85C, 1.32 x rated voltage 1,000 cycles (125C, 1.2 x rated voltage). Within initial limits DCL Within initial limits ESR Within initial limits C/C MIL-STD-202, Method 213, Condition I, 100 G peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within 5% of initial value DF Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1,000 10 T495C476M016ATE350_IMP T495C476M016ATE350 T495D157M016ATE085_IMP T495D157M016ATE085 T495X227M016ATE100 T495X227M016ATE100_IMP Capacitance (F) Impedance, ESR (Ohms) 100 T495C476M016ATE350_ESR T495D157M016ATE085_ESR T495X227M016ATE100_ESR 1 100 10 0.1 0.01 100 1 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 T2009_T495 * 10/24/2018 3 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Dimensions - Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B H X T S G S EIA P Termination cutout at KEMET's option, either end Case Size KEMET Glue pad shape/design at KEMET's option E R F L Typical Weight Component L W H F 0.1 (0.004) 1.6 0.2 (0.063 0.008) S B 0.15 (Ref) 0.006 X (Ref) P R T A G E (Ref) (Ref) (Ref) (Min) (Ref) (Ref) (mg) 0.4 (0.016) 0.10 0.10 0.4 0.4 0.13 1.2 1.1 1.3 (0.004 0.004) (0.016) (0.016) (0.005) (0.047) (0.043) (0.051) 58.60 0.4 (0.016) 0.10 0.10 0.5 1.0 0.13 1.9 1.8 2.2 (0.004 0.004) (0.020) (0.039) (0.005) (0.075) (0.071) (0.087) 107.45 2.2 (0.087) 0.80 (0.032) +0.2 (0.008) /-0.3(0.011) 0.80 (0.032) +0.1 (0.004) /-0.3(0.011) 0.8 (0.031) 0.3 (0.012) 6.0 0.3 3.2 0.3 2.5 0.3 6032-28 (0.236 0.012) (0.126 0.012) (0.098 0.012) 2.2 (0.087) 1.3 (0.051) 0.3 (0.012) 0.5 (0.020) U 6.0 0.3 3.2 0.2 6032-15 (0.236 0.012) (0.110 0.008) 2.2 (0.087) 1.3 (0.051) 0.3 (0.012) N/A D 7.3 0.3 4.3 0.3 2.8 0.3 7343-31 (0.287 0.012) (0.169 0.012) (0.110 0.012) 2.4 (0.094) 1.3 (0.051) 0.3 (0.012) 0.5 (0.020) W 7.3 0.3 4.3 0.3 7343-15 (0.287 0.012) (0.169 0.012) 2.4 (0.094) 1.3 (0.051) 0.3 (0.012) N/A X 7.3 0.3 4.3 0.3 4.0 0.3 7343-43 (0.287 0.012) (0.169 0.012) (0.157 0.012) 6.0 0.3 7.3 0.3 3.6 0.2 7360-38 (0.287 (0.236 0.012) (0.142 0.008) 0.012) 2.4 (0.094) 1.3 (0.051) 0.3 (0.012) 4.1 (0.161) 1.3 (0.051) 0.3 (0.012) T 3.5 0.2 2.8 0.2 3528-12 (0.138 0.008) (0.110 0.008) 1.2 (0.047) 2.2 (0.087) V 7.3 0.3 4.3 0.3 7343-20 (0.287 0.012) (0.169 0.012) 2.0 (0.079) 2.4 (0.094) 0.80 (0.032) +0.1 (0.004) /-0.3(0.011) 1.3 (0.051) 0.3 (0.012) A 3.2 0.2 3216-18 (0.126 0.008) 1.6 0.2 (0.063 0.008) 1.2 (0.047) B 3.5 0.2 2.8 0.2 1.9 0.2 3528-21 (0.138 0.008) (0.110 0.008) (0.075 0.008) 2.2 (0.087) M 3.5 0.2 2.8 0.2 3528-15 (0.138 0.008) (0.110 0.008) C E 1.5 (0.059) 1.5 (0.059) 1.5 (0.059) 1.9 0.13 (0.005) (0.075) 0.10 0.10 0.9 1.0 0.13 2.9 (0.004 0.004) (0.035) (0.039) (0.005) (0.114) 2.9 0.05 0.13 N/A N/A (0.005) (0.002) (0.114) 0.10 0.10 0.9 1.0 0.13 3.6 (0.004 0.004) (0.035) (0.039) (0.005) (0.142) 1.8 2.2 (0.071) (0.087) 97.99 2.8 2.4 (0.110) (0.094) 224.48 2.8 2.4 (0.110) (0.094) 70.00 3.5 3.5 (0.138) (0.138) 446.84 0.13 3.6 3.5 3.5 (0.005) (0.142) (0.138) (0.138) 248.27 0.5 (0.020) 0.10 0.10 1.7 1.0 0.13 3.6 3.5 3.5 (0.004 0.004) (0.067) (0.039) (0.005) (0.142) (0.138) (0.138) 652.04 0.5 (0.020) 0.10 0.10 (0.004 0.004) N/A N/A 0.13 3.6 3.5 3.5 (0.005) (0.142) (0.138) (0.138) 803.76 N/A 0.05 (0.002) N/A N/A 0.13 1.9 1.8 2.2 (0.005) (0.075) (0.071) (0.087) 63.89 N/A 0.05 (0.002) N/A N/A 3.6 0.13 3.5 3.5 (0.005) (0.142) (0.138) (0.138) 286.40 N/A 0.05 (0.002) 0.05 (0.002) N/A N/A N/A N/A Notes: (Ref) - Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 4 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 220 470 1000 1000 6.8 22 22 33 68 68 100 100 150 150 150 150 220 220 220 330 330 330 330 330 470 470 470 470 470 470 680 680 680 1000 1000 1000 1000 1000 1000 1000 1000 2.2 3.3 6.8 6.8 D/7343-31 D/7343-31 X/7343-43 X/7343-43 A/3216-18 C/6032-28 C/6032-28 T/3528-12 T/3528-12 V/7343-20 B/3528-21 D/7343-31 B/3528-21 C/6032-28 C/6032-28 U/6032-15 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T495D227(1)2R5A(2)E045 T495D477(1)2R5A(2)E035 T495X108(1)2R5A(2)E030 T495X108(1)2R5A(2)E040 T495A685(1)004A(2)E2K0 T495C226(1)004A(2)E2K4 T495C226(1)004A(2)E380 T495T336(1)004A(2)E1K2 T495T686(1)004A(2)E1K5 T495V686(1)004A(2)E150 T495B107(1)004A(2)E500 T495D107(1)004A(2)E800 T495B157(M)004A(2)E900 T495C157(1)004A(2)E070 T495C157(1)004A(2)E250 T495U157(1)004A(2)E200 T495D227(1)004A(2)E040 T495D227(1)004A(2)E050 T495D227(1)004A(2)E100 T495C337(1)004A(2)E300 T495C337(1)004A(2)E700 T495D337(1)004A(2)E030 T495D337(1)004A(2)E045 T495D337(1)004A(2)E100 T495D477(1)004A(2)E045 T495D477(1)004A(2)E100 T495X477(1)004A(2)E030 T495X477(1)004A(2)E045 T495X477(1)004A(2)E060 T495X477(1)004A(2)E100 T495X687(1)004A(2)E040 T495X687(1)004A(2)E060 T495X687(1)004A(2)E100 T495X108(1)004A(2)E030 T495X108(1)004A(2)E040 T495X108(1)004A(2)E060 T495X108(1)004A(2)E070 T495X108(1)004A(2)E090 T495X108(1)004A(2)E100 T495E108(1)004A(2)E035 T495E108(1)004A(2)E050 T495A225(1)006ATE5K0 T495A335(1)006ATE3K0 T495A685(1)006ATE1K8 T495A685(1)006ATE2K0 5.5 11.8 25.0 25.0 0.5 0.9 0.9 1.3 2.7 2.7 4.0 4.0 6.0 6.0 6.0 6.0 8.8 8.8 8.8 13.2 13.2 13.2 13.2 13.2 18.8 18.8 18.8 18.8 18.8 18.8 27.2 27.2 27.2 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 0.5 0.5 0.5 0.5 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 8.0 45 1826 8.0 35 2070 15.0 30 2345 15.0 40 2031 6.0 2000 194 6.0 2400 214 6.0 380 538 8.0 1200 242 20.0 1500 216 6.0 150 913 8.0 500 412 6.0 800 433 12.0 900 307 12.0 70 1254 8.0 250 663 8.0 200 671 8.0 40 1936 8.0 50 1732 8.0 100 1225 10.0 300 606 12.0 700 396 8.0 30 2236 8.0 45 1826 8.0 100 1225 12.0 45 1826 12.0 100 1225 8.0 30 2345 8.0 45 1915 10.0 60 1658 8.0 100 1285 10.0 40 2031 10.0 60 1658 10.0 100 1285 30 2345 10.0 10.0 40 2031 10.0 60 1658 10.0 70 1535 10.0 90 1354 10.0 100 1285 15.0 35 2390 15.0 50 2000 6.0 5000 122 6.0 3000 158 6.0 1800 204 6.0 2000 194 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 1643 1863 2111 1828 175 193 484 218 194 822 371 390 276 1129 597 604 1742 1559 1103 545 356 2012 1643 1103 1643 1103 2111 1724 1492 1157 1828 1492 1157 2111 1828 1492 1382 1219 1157 2151 1800 110 142 184 175 mA at +85C 100 kHz mA at +125C 100 kHz 730 828 938 812 78 86 215 97 86 365 165 173 123 502 265 268 774 693 490 242 158 894 730 490 730 490 938 766 663 514 812 663 514 938 812 663 614 542 514 956 800 49 63 82 78 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 5 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.8 6.8 10 10 10 10 10 10 15 15 22 22 22 22 22 33 33 33 33 47 47 47 47 47 47 47 47 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 150 A/3216-18 C/6032-28 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 T/3528-12 A/3216-18 T/3528-12 A/3216-18 A/3216-18 A/3216-18 B/3528-21 C/6032-28 A/3216-18 B/3528-21 T/3528-12 C/6032-28 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 V/7343-20 B/3528-21 C/6032-28 U/6032-15 D/7343-31 D/7343-31 B/3528-21 B/3528-21 M/3528-15 M/3528-15 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 C/6032-28 T495A685(1)006A(2)E4K5 T495C685(1)006A(2)E480 T495A106(1)006A(2)E800 T495A106(1)006A(2)E1K0 T495A106(1)006A(2)E1K5 T495A106(1)006A(2)E2K0 T495B106(1)006A(2)E1K0 T495T106(1)006A(2)E1K2 T495A156(1)006A(2)E2K0 T495T156(1)006A(2)E1K0 T495A226(1)006A(2)E500 T495A226(1)006A(2)E900 T495A226(1)006A(2)E1K5 T495B226(1)006A(2)E500 T495C226(1)006A(2)E380 T495A336(1)006A(2)E600 T495B336(1)006A(2)E600 T495T336(1)006A(2)E800 T495C336(1)006A(2)E350 T495B476(1)006A(2)E250 T495B476(1)006A(2)E400 T495B476(1)006A(2)E450 T495B476(1)006A(2)E500 T495C476(1)006A(2)E250 T495C476(1)006A(2)E300 T495C476(1)006A(2)E330 T495V476(1)006A(2)E150 T495B686(1)006A(2)E500 T495C686(1)006A(2)E400 T495U686(1)006A(2)E400 T495D686(1)006A(2)E175 T495D686(1)006A(2)E180 T495B107(1)006A(2)E400 T495B107(M)006A(2)E700 T495M107(1)006A(2)E500 T495M107(1)006A(2)E1K0 T495C107(1)006A(2)E075 T495C107(1)006A(2)E150 T495D107(1)006A(2)E050 T495D107(1)006A(2)E130 T495D107(1)006A(2)E150 T495D107(1)006A(2)E800 T495V107(1)006A(2)E090 T495V107(1)006A(2)E150 T495C157(1)006A(2)E050 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.9 0.9 1.4 1.4 1.4 1.4 1.4 2.1 2.1 2.1 2.1 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.3 4.3 4.3 4.3 4.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 9.5 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 6.0 4500 129 6.0 480 479 6.0 800 306 6.0 1000 274 6.0 1500 224 6.0 2000 194 6.0 1000 292 6.0 1200 242 6.0 2000 194 6.0 1000 265 6.0 500 387 8.0 900 289 8.0 1500 224 6.0 500 412 6.0 380 538 12.0 600 354 6.0 600 376 6.0 800 296 6.0 350 561 6.0 250 583 6.0 400 461 6.0 450 435 6.0 500 583 6.0 250 663 6.0 300 606 6.0 330 577 6.0 150 913 8.0 500 412 6.0 400 524 6.0 400 474 4.0 175 926 4.0 180 913 15.0 400 461 700 348 15.0 20.0 500 490 20.0 1000 346 8.0 75 1211 8.0 150 856 6.0 50 1732 6.0 130 1074 8.0 150 1000 6.0 800 433 8.0 90 1179 8.0 150 913 8.0 50 1483 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 116 431 275 247 202 175 263 218 175 239 348 260 202 371 484 319 338 266 505 525 415 392 525 597 545 519 822 371 472 427 833 822 415 313 441 311 1090 770 1559 967 900 390 1061 822 1335 mA at +85C 100 kHz mA at +125C 100 kHz 52 192 122 110 90 78 117 97 78 106 155 116 90 165 215 142 150 118 224 233 184 174 233 265 242 231 365 165 210 190 370 365 184 139 196 138 484 342 693 430 400 173 472 365 593 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 6 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 C/6032-28 U/6032-15 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 W/7343-15 X/7343-43 X/7343-43 X/7343-43 V/7343-20 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T495C157(M)006A(2)E200 T495U157(1)006A(2)E200 T495V157(1)006A(2)E040 T495V157(1)006A(2)E070 T495V157(1)006A(2)E150 T495D157(1)006A(2)E050 T495D157(1)006A(2)E065 T495D157(1)006A(2)E080 T495D157(1)006A(2)E100 T495D157(1)006A(2)E125 T495X157(1)006A(2)E100 T495C227(1)006A(2)E225 T495C227(1)006A(2)E200 T495C227(1)006A(2)E100 T495D227(1)006A(2)E045 T495D227(1)006A(2)E050 T495D227(1)006A(2)E100 T495W227(1)006A(2)E250 T495X227(1)006A(2)E070 T495X227(1)006A(2)E080 T495X227(1)006A(2)E100 T495V227(1)006ATE150 T495C337(1)006A(2)E200 T495D337(1)006A(2)E040 T495D337(1)006A(2)E045 T495D337(1)006A(2)E050 T495D337(1)006A(2)E070 T495D337(1)006A(2)E100 T495V337(1)006A(2)E150 T495X337(1)006A(2)E045 T495X337(1)006A(2)E050 T495X337(1)006A(2)E065 T495X337(1)006A(2)E080 T495X337(1)006A(2)E100 T495E337(1)006A(2)E060 T495E337(1)006A(2)E100 T495D477(1)006A(2)E045 T495D477(1)006A(2)E100 T495D477(1)006A(2)E125 T495D477(1)006A(2)E150 T495V477(1)006A(2)E150 T495X477(1)006A(2)E030 T495X477(1)006A(2)E045 T495X477(1)006A(2)E050 T495X477(1)006A(2)E060 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 20.8 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 8.0 200 742 8.0 200 671 8.0 40 1768 8.0 70 1336 8.0 150 913 6.0 50 1732 6.0 65 1519 6.0 80 1369 6.0 100 1225 6.0 125 1095 6.0 100 1285 10.0 225 699 10.0 200 742 10.0 100 1049 8.0 45 1826 8.0 50 1732 8.0 100 1225 8.0 250 849 8.0 70 1535 8.0 80 1436 8.0 100 1285 8.0 150 913 18.0 200 742 8.0 40 1936 8.0 45 1826 8.0 50 1732 8.0 70 1464 8.0 100 1225 8.0 150 913 8.0 45 1915 8.0 50 1817 8.0 65 1593 8.0 80 1436 100 1285 8.0 8.0 60 1826 8.0 100 1414 12.0 45 1826 12.0 100 1225 12.0 125 1095 12.0 150 1000 15.0 150 913 10.0 30 2345 10.0 45 1915 10.0 50 1817 10.0 60 1658 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 668 604 1591 1202 822 1559 1367 1232 1103 986 1157 629 668 944 1643 1559 1103 764 1382 1292 1157 822 668 1742 1643 1559 1318 1103 822 1724 1635 1434 1292 1157 1643 1273 1643 1103 986 900 822 2111 1724 1635 1492 mA at +85C 100 kHz mA at +125C 100 kHz 297 268 707 534 365 693 608 548 490 438 514 280 297 420 730 693 490 340 614 574 514 365 297 774 730 693 586 490 365 766 727 637 574 514 730 566 730 490 438 400 365 938 766 727 663 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 7 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 470 470 470 470 470 470 680 680 680 1000 1000 1000 2.2 2.2 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 T/3528-12 A/3216-18 A/3216-18 B/3528-21 B/3528-21 T/3528-12 B/3528-21 C/6032-28 C/6032-28 C/6032-28 T495X477(1)006A(2)E065 T495X477(1)006A(2)E100 T495X477(1)006A(2)E125 T495E477(1)006A(2)E040 T495E477(1)006A(2)E055 T495E477(1)006A(2)E100 T495X687(1)006A(2)E100 T495X687(1)006A(2)E060 T495X687(1)006A(2)E045 T495X108(1)006A(2)E100 T495E108(1)006A(2)E050 T495E108(1)006A(2)E040 T495A225(1)010A(2)E1K8 T495A225(1)010A(2)E7K0 T495A335(1)010A(2)E2K0 T495A475(1)010A(2)E1K2 T495A475(1)010A(2)E1K3 T495A475(1)010A(2)E1K4 T495A475(1)010A(2)E1K8 T495A475(1)010A(2)E2K0 T495B475(1)010A(2)E1K3 T495B475(1)010A(2)E1K5 T495A685(1)010A(2)E1K8 T495B685(1)010A(2)E900 T495B685(1)010A(2)E1K1 T495B685(1)010A(2)E1K2 T495A106(1)010A(2)E1K8 T495A106(1)010A(2) E2K0 T495A106(1)010A(2) E2K5 T495A106(1)010A(2) E3K8 T495B106(1)010A(2) E600 T495B106(1)010A(2)E750 T495B106(1)010A(2) E1K2 T495B106(1)010A(2)E3K0 T495C106(1)010AT E400 T495T106(1)010AT E1K5 T495A156(1)010AT E1K0 T495A156(1)010AT E1K8 T495B156(1)010AT E600 T495B156(1)010AT E900 T495T156(1)010AT E1K2 T495B156(1)010A(2)E500 T495C156(1)010A(2)E375 T495C156(1)010A(2)E400 T495C156(1)010A(2)E475 29.6 29.6 29.6 29.6 29.6 29.6 42.8 42.8 42.8 63.0 63.0 63.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 10.0 65 1593 10.0 100 1285 10.0 125 1149 12.0 40 2236 10.0 55 1907 10.0 100 1414 12.0 100 1285 12.0 60 1658 12.0 45 1915 20.0 100 1285 15.0 50 2000 15.0 40 2236 6.0 1800 204 6.0 7000 104 6.0 2000 194 6.0 1200 250 6.0 1300 240 6.0 1400 231 6.0 1800 204 6.0 2000 194 15.0 1300 256 6.0 1500 238 6.0 1800 204 6.0 900 307 6.0 1100 278 6.0 1200 266 6.0 1800 204 6.0 2000 194 6.0 2500 173 6.0 3800 140 6.0 600 376 6.0 750 337 6.0 1200 266 3000 168 6.0 6.0 400 524 6.0 1500 216 6.0 1000 274 6.0 1800 204 6.0 600 376 6.0 900 307 6.0 1200 242 6.0 500 412 6.0 375 542 6.0 400 524 6.0 475 481 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 1434 1157 1034 2012 1716 1273 1157 1492 1724 1157 1800 2012 184 94 175 225 216 208 184 175 230 214 184 276 250 239 184 175 156 126 338 303 239 151 472 194 247 184 338 276 218 371 488 472 433 mA at +85C 100 kHz mA at +125C 100 kHz 637 514 460 894 763 566 514 663 766 514 800 894 82 42 78 100 96 92 82 78 102 95 82 123 111 106 82 78 69 56 150 135 106 67 210 86 110 82 150 123 97 165 217 210 192 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 8 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 22 22 22 22 22 22 22 22 22 22 22 22 22 22 33 33 33 33 33 47 47 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 100 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 B/3528-21 B/3528-21 C/6032-28 U/6032-15 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 B/3528-21 T495A226(1)010AT E1K2 T495A226(1)010AT E1K5 T495B226(1)010AT E400 T495B226(1)010AT E500 T495B226(1)010AT E700 T495B226(1)010AT E800 T495B226(1)010A(2)E2K3 T495C226(1)010A(2)E200 T495C226(1)010A(2)E245 T495C226(1)010A(2)E290 T495C226(1)010A(2)E300 T495C226(1)010A(2)E345 T495C226(1)010A(2)E350 T495C226(1)010A(2)E380 T495B336(1)010A(2)E450 T495B336(1)010A(2)E550 T495B336(1)010A(2)E650 T495V336(1)010A(2)E100 T495V336(1)010A(2)E150 T495B476(1)010A(2)E500 T495B476(1)010A(2)E650 T495C476(1)010A(2)E300 T495U476(1)010A(2)E400 T495D476(1)010A(2)E080 T495D476(1)010A(2)E090 T495D476(1)010A(2)E100 T495D476(1)010A(2)E200 T495V476(1)010A(2)E200 T495B686(1)010A(2)E600 T495B686(1)010A(2)E750 T495B686(M)010A(2)E900 T495C686(1)010A(2)E080 T495C686(1)010A(2)E200 T495C686(1)010A(2)E225 T495C686(1)010A(2)E250 T495V686(1)010A(2)E070 T495V686(1)010A(2)E100 T495V686(1)010A(2)E140 T495V686(1)010A(2)E200 T495D686(1)010A(2)E070 T495D686(1)010A(2)E090 T495D686(1)010A(2)E100 T495D686(1)010A(2)E150 T495X686(1)010A(2)E150 T495B107(M)010A(2)E350 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 10.0 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 8.0 1200 250 8.0 1500 224 6.0 400 461 6.0 500 412 6.0 700 348 6.0 800 326 6.0 2300 192 6.0 200 742 6.0 245 670 6.0 290 616 6.0 300 606 6.0 345 565 6.0 350 561 6.0 380 538 6.0 450 435 6.0 550 393 6.0 650 362 6.0 100 1118 6.0 150 913 6.0 500 412 6.0 650 362 6.0 300 606 6.0 400 474 4.0 80 1369 6.0 90 1291 6.0 100 1225 4.0 200 866 6.0 200 791 8.0 600 376 8.0 750 337 8.0 900 307 6.0 80 1173 6.0 200 742 225 699 6.0 6.0 250 663 6.0 70 1336 6.0 100 1118 6.0 140 945 6.0 200 791 6.0 70 1464 6.0 90 1291 6.0 100 1225 6.0 150 1000 4.0 150 1049 12.0 350 493 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 225 202 415 371 313 293 173 668 603 554 545 509 505 484 392 354 326 1006 822 371 326 545 427 1232 1162 1103 779 712 338 303 276 1056 668 629 597 1202 1006 851 712 1318 1162 1103 900 944 444 mA at +85C 100 kHz mA at +125C 100 kHz 100 90 184 165 139 130 77 297 268 246 242 226 224 215 174 157 145 447 365 165 145 242 190 548 516 490 346 316 150 135 123 469 297 280 265 534 447 378 316 586 516 490 400 420 197 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 9 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 220 330 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 U/6032-15 W/7343-15 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 C/6032-28 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 T495B107(M)010A(2)E500 T495B107(M)010A(2)E700 T495C107(1)010A(2)E100 T495C107(1)010A(2)E150 T495C107(1)010A(2)E180 T495C107(1)010A(2)E200 T495C107(1)010A(2)E250 T495U107(1)010A(2)E150 T495W107(1)010A(2)E200 T495V107(1)010A(2)E100 T495V107(1)010A(2)E150 T495V107(1)010A(2)E200 T495D107(1)010A(2)E050 T495D107(1)010A(2)E065 T495D107(1)010A(2)E080 T495D107(1)010A(2)E100 T495D107(1)010A(2)E120 T495D107(1)010A(2)E125 T495X107(1)010A(2)E100 T495C157(1)010A(2)E200 T495V157(1)010A(2)E100 T495V157(1)010A(2)E150 T495V157(1)010A(2)E200 T495D157(1)010A(2)E050 T495D157(1)010A(2)E060 T495D157(1)010A(2)E080 T495D157(1)010A(2)E100 T495X157(1)010A(2)E070 T495X157(1)010A(2)E080 T495X157(1)010A(2)E085 T495X157(1)010A(2)E100 T495D227(1)010A(2)E045 T495D227(1)010A(2)E050 T495D227(1)010A(2)E075 T495D227(1)010A(2)E100 T495D227(1)010A(2)E125 T495V227(1)010A(2)E150 T495V227(1)010A(2)E200 T495X227(1)010A(2)E045 T495X227(1)010A(2)E050 T495X227(1)010A(2)E060 T495X227(1)010A(2)E070 T495X227(1)010A(2)E080 T495X227(1)010A(2)E100 T495D337(1)010A(2)E100 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 33.0 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 30.0 500 412 30.0 700 348 8.0 100 1050 8.0 150 856 8.0 180 782 8.0 200 742 8.0 250 663 8.0 150 775 8.0 200 949 8.0 100 1118 8.0 150 913 8.0 200 791 8.0 50 1732 8.0 65 1519 8.0 80 1369 8.0 100 1225 8.0 120 1118 8.0 125 1095 6.0 100 1285 10.0 200 742 8.0 100 1118 8.0 150 913 8.0 200 791 8.0 50 1732 8.0 60 1581 8.0 80 1369 8.0 100 1225 8.0 70 1535 8.0 80 1436 8.0 85 1393 8.0 100 1285 8.0 45 1826 9.0 50 1732 75 1414 8.0 8.0 100 1225 8.0 125 1095 10.0 150 913 10.0 200 791 8.0 45 1915 8.0 50 1817 8.0 60 1658 8.0 70 1535 8.0 80 1436 8.0 100 1285 8.0 100 1225 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 371 313 945 812 704 668 597 698 854 1006 822 712 1559 1367 1232 1103 1006 986 1157 668 1006 822 712 1559 1423 1232 1103 1382 1292 1254 1157 1643 1559 1273 1103 986 822 712 1724 1635 1492 1382 1292 1157 1103 mA at +85C 100 kHz mA at +125C 100 kHz 165 139 420 542 313 297 265 310 380 447 365 316 693 608 548 490 447 438 514 297 447 365 316 693 632 548 490 614 574 557 514 730 693 566 490 438 365 316 766 727 663 614 574 514 490 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 10 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 1.0 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 4.7 6.8 6.8 10 10 10 10 10 10 15 15 15 15 15 22 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T/3528-12 A/3216-18 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 T495D337(1)010A(2)E125 T495D337(1)010A(2)E150 T495X337(1)010A(2)E035 T495X337(1)010A(2)E040 T495X337(1)010A(2)E050 T495X337(1)010A(2)E060 T495X337(1)010A(2)E080 T495X337(1)010A(2)E100 T495E337(1)010A(2)E040 T495E337(1)010A(2)E060 T495E337(1)010A(2)E100 T495X477(1)010A(2)E045 T495X477(1)010A(2)E050 T495X477(1)010A(2)E060 T495X477(1)010A(2)E080 T495X477(1)010A(2)E100 T495X477(1)010A(2)E200 T495E477(1)010A(2)E040 T495E477(1)010A(2)E060 T495E477(1)010A(2)E100 T495A105(1)016A(2)E5K0 T495A155(1)016A(2)E5K0 T495A225(1)016A(2)E2K5 T495A225(1)016A(2)E1K8 T495A335(1)016A(2)E3K0 T495B335(1)016A(2)E2K0 T495A475(1)016A(2)E2K0 T495B475(1)016A(2)E700 T495B475(1)016A(2)E800 T495B475(1)016A(2)E1K0 T495B475(1)016A(2)E1K5 T495B685(1)016A(2)E1K2 T495C685(1)016A(2)E750 T495A106(1)016A(2)E1K7 T495B106(1)016A(2)E500 T495B106(1)016A(2)E650 T495B106(1)016A(2)E800 T495B106(1)016A(2)E2K5 T495T106(M)016A(2)E4K0 T495A156(1)016A(2)E2K5 T495B156(1)016A(2)E500 T495B156(1)016A(2)E650 T495B156(1)016A(2)E800 T495C156(1)016A(2)E400 T495B226(1)016A(2)E600 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 0.8 0.8 0.8 1.1 1.1 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 2.4 3.5 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 10.0 125 1095 10.0 150 1000 10.0 35 2171 10.0 40 2031 10.0 50 1817 10.0 60 1658 10.0 80 1436 10.0 100 1285 8.0 40 2236 10.0 60 1826 10.0 100 1414 10.0 45 1915 10.0 50 1817 10.0 60 1658 10.0 80 1436 10.0 100 1285 10.0 200 908 10.0 40 2236 10.0 60 1826 10.0 100 1414 6.0 5000 122 6.0 5000 122 6.0 2500 173 6.0 1800 204 6.0 3000 158 6.0 2000 206 6.0 2000 194 6.0 700 348 6.0 800 326 6.0 1000 292 6.0 1500 238 6.0 1200 266 6.0 750 383 1700 210 6.0 6.0 500 412 6.0 650 362 6.0 800 326 6.0 2500 184 8.0 4000 132 8.0 2500 173 6.0 500 412 6.0 650 362 6.0 800 326 6.0 400 524 6.0 600 376 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 986 900 1954 1828 1635 1492 1292 1157 2012 1643 1273 1724 1635 1492 1292 1157 817 2012 1643 1273 110 110 156 184 142 185 175 313 293 263 214 239 345 189 371 326 293 166 119 156 371 326 293 472 338 mA at +85C 100 kHz mA at +125C 100 kHz 438 400 868 812 727 663 574 514 894 730 566 766 727 663 574 514 363 894 730 566 49 49 69 82 63 82 78 139 130 117 95 106 153 84 165 145 130 74 53 69 165 145 130 210 150 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 11 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 22 22 22 22 33 33 33 33 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 150 150 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 U/6032-15 U/6032-15 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 C/6032-28 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 X/7343-43 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 B/3528-21 D/7343-31 T495B226(1)016A(2)E700 T495C226(1)016A(2)E300 T495C226(1)016A(2)E350 T495C226(1)016A(2)E500 T495C336(1)016A(2)E200 T495C336(1)016A(2)E225 T495C336(1)016A(2)E230 T495C336(1)016A(2)E275 T495C336(1)016A(2)E300 T495U336(1)016A(2)E200 T495U336(1)016A(2)E400 T495B336(1)016A(2)E350 T495D336(1)016A(2)E150 T495D336(1)016A(2)E175 T495D336(1)016A(2)E200 T495D336(1)016A(2)E225 T495D336(1)016A(2)E250 T495C476(1)016A(2)E300 T495C476(1)016A(2)E350 T495D476(1)016A(2)E080 T495D476(1)016A(2)E100 T495D476(1)016A(2)E150 T495D476(1)016A(2)E180 T495D476(1)016A(2)E800 T495C686(1)016A(2)E250 T495C686(1)016A(2)E200 T495C686(1)016A(2)E180 T495V686(1)016A(2)E180 T495V686(1)016A(2)E250 T495V686(1)016A(2)E300 T495D686(1)016A(2)E070 T495D686(1)016A(2)E100 T495D686(1)016A(2)E150 T495X686(1)016A(2)E150 T495C107(1)016A(2)E200 T495D107(1)016A(2)E060 T495D107(1)016A(2)E100 T495D107(1)016A(2)E125 T495D107(1)016A(2)E130 T495D107(1)016A(2)E150 T495D107(1)016A(2)E800 T495X107(1)016A(2)E080 T495X107(1)016A(2)E100 T495B157(1)016A(2)E800 T495D157(M)016A(2)E060 3.5 3.5 3.5 3.5 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.9 10.9 10.9 10.9 10.9 10.9 10.9 10.9 10.9 10.9 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 6.0 700 348 6.0 300 606 6.0 350 561 6.0 500 469 6.0 200 742 6.0 225 699 6.0 230 692 6.0 275 632 6.0 300 606 6.0 200 671 6.0 400 474 6.0 350 493 6.0 150 1000 6.0 175 926 6.0 200 866 4.0 225 816 6.0 250 775 6.0 300 606 6.0 350 561 6.0 80 1369 6.0 100 1225 6.0 150 1000 6.0 180 913 6.0 800 433 6.0 250 663 6.0 200 742 6.0 180 782 6.0 180 833 6.0 250 707 6.0 300 645 6.0 70 1464 6.0 100 1225 6.0 150 1000 150 1049 5.0 10.0 200 742 8.0 60 1581 8.0 100 1225 8.0 125 1095 8.0 130 1074 8.0 150 1000 8.0 800 433 8.0 80 1436 8.0 100 1285 6.0 800 326 12.0 60 1581 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 313 545 505 422 668 629 623 569 545 604 427 444 900 833 779 734 698 545 505 1232 1103 900 822 390 597 668 704 750 636 581 1318 1103 900 944 668 1423 1103 986 967 900 390 1292 1157 293 1423 mA at +85C 100 kHz mA at +125C 100 kHz 139 242 224 188 297 280 277 253 242 268 190 197 400 370 346 326 310 242 224 548 490 400 365 173 265 297 313 333 283 258 586 490 400 420 297 632 490 438 430 400 173 574 514 130 632 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 12 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 1 1 2.2 4.7 4.7 4.7 4.7 6.8 10 10 10 10 10 10 10 15 15 15 15 22 22 22 22 33 33 33 33 33 47 47 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 E/7360-38 E/7360-38 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 T495D157(1)016A(2)E085 T495D157(1)016A(2)E100 T495D157(1)016A(2)E125 T495D157(1)016A(2)E130 T495D157(1)016A(2)E150 T495X157(1)016A(2)E075 T495X157(1)016A(2)E100 T495D227(1)016A(2)E150 T495D227(1)016A(2)E200 T495D227(1)016A(2)E220 T495X227(1)016A(2)E100 T495E227(1)016A(2)E050 T495E227(1)016A(2)E075 T495E227(1)016A(2)E100 T495E227(1)016A(2)E150 T495A105(1)020A(2)E3K0 T495A105(1)020A(2)E5K0 T495A225(1)020A(2)E3K0 T495A475(1)020A(2)E1K8 T495A475(1)020A(2)E2K0 T495B475(1)020A(2)E750 T495B475(1)020A(2)E1K0 T495C685(1)020A(2)E480 T495B106(1)020A(2)E1K0 T495B106(1)020A(2)E800 T495C106(1)020A(2)E300 T495C106(1)020A(2)E350 T495C106(1)020A(2)E400 T495C106(1)020A(2)E450 T495C106(1)020A(2)E475 T495C156(1)020A(2)E375 T495C156(1)020A(2)E400 T495D156(1)020A(2)E275 T495D156(1)020A(2)E1K2 T495D226(1)020A(2)E180 T495D226(1)020A(2)E200 T495D226(1)020A(2)E225 T495V226(1)020A(2)E400 T495C336(1)020A(2)E200 T495D336(1)020A(2)E100 T495D336(1)020A(2)E150 T495D336(1)020A(2)E200 T495X336(1)020A(2)E200 T495D476(1)020A(2)E075 T495D476(1)020A(2)E100 24.0 24.0 24.0 24.0 24.0 24.0 24.0 35.2 35.2 35.2 35.2 35.2 35.2 35.2 35.2 0.5 0.5 0.5 0.9 0.9 0.9 0.9 1.4 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 4.4 4.4 4.4 4.4 6.6 6.6 6.6 6.6 6.6 9.4 9.4 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 8.0 85 1328 8.0 100 1225 8.0 125 1095 8.0 130 1074 8.0 150 1000 8.0 75 1483 8.0 100 1285 12.0 150 1000 12.0 200 866 12.0 220 826 8.0 100 1285 12.0 50 2000 8.0 75 1633 7.2 100 1414 7.2 150 1155 4.0 3000 158 4.0 5000 122 6.0 3000 158 6.0 1800 204 6.0 2000 194 6.0 750 337 6.0 1000 292 6.0 480 479 6.0 1000 292 6.0 800 326 6.0 300 606 6.0 350 561 6.0 400 524 6.0 450 494 6.0 475 481 6.0 375 542 6.0 400 524 4.0 275 739 1200 354 4.0 4.0 180 913 4.0 200 866 4.0 225 816 6.0 400 559 6.0 200 742 6.0 100 1225 6.0 150 1000 6.0 200 866 6.0 200 908 6.0 75 1414 6.0 100 1225 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 1195 1103 986 967 900 1335 1157 900 779 743 1157 1800 1470 1273 1040 142 110 142 184 175 303 263 431 263 293 545 505 472 445 433 488 472 665 319 822 779 734 503 668 1103 900 779 817 1273 1103 mA at +85C 100 kHz mA at +125C 100 kHz 531 490 438 430 400 593 514 400 346 330 514 800 653 566 462 63 49 63 82 78 135 117 192 117 130 242 224 210 198 192 217 210 296 142 365 346 326 224 297 490 400 346 363 566 490 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 13 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 47 47 47 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 150 0.47 0.47 1 1 1 1 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T495D476(1)020A(2)E150 T495D476(1)020A(2)E175 T495D476(1)020A(2)E200 T495D476(1)020A(2)E250 T495X476(1)020A(2)E065 T495X476(1)020A(2)E070 T495X476(1)020A(2)E100 T495X476(1)020A(2)E125 T495X476(1)020A(2)E130 T495X476(1)020A(2)E150 T495C686(1)020A(2)E250 T495D686(1)020A(2)E070 T495D686(1)020A(2)E100 T495D686(1)020A(2)E150 T495D686(1)020A(2)E200 T495D686(1)020A(2)E300 T495X686(1)020A(2)E120 T495X686(1)020A(2)E130 T495X686(1)020A(2)E150 T495X686(1)020A(2)E200 T495D107(1)020A(2)E200 T495X107(1)020A(2)E100 T495X107(1)020A(2)E150 T495E107(1)020A(2)E060 T495E107(1)020A(2)E085 T495E107(1)020A(2)E100 T495E107(1)020A(2)E200 T495E157(1)020A(2)E080 T495A474(1)025A(2)E4K5 T495A474(1)025A(2)E7K0 T495A105(1)025A(2)E2K5 T495A105(1)025A(2)E3K0 T495A105(1)025A(2)E4K0 T495A105(1)025A(2)E5K0 T495A155(1)025A(2)E3K0 T495B225(1)025A(2)E1K2 T495C225(1)025A(2)E1K3 T495B335(1)025A(2)E1K2 T495C335(1)025A(2)E750 T495C475(1)025A(2)E530 T495C475(1)025A(2)E575 T495B475(1)025A(2)E700 T495B475(1)025A(2)E750 T495B475(1)025A(2)E800 T495B475(1)025A(2)E900 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 20.0 20.0 20.0 20.0 20.0 20.0 20.0 30.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.8 0.8 1.2 1.2 1.2 1.2 1.2 1.2 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 6.0 150 1000 6.0 175 926 6.0 200 866 6.0 250 775 8.0 65 1593 6.0 70 1535 6.0 100 1285 6.0 125 1149 6.0 130 1127 4.0 150 1049 8.0 250 663 6.0 70 1464 6.0 100 1225 6.0 150 1000 6.0 200 866 6.0 300 707 6.0 120 1173 6.0 130 1127 6.0 150 1049 6.0 200 908 6.0 200 866 6.0 100 1285 8.0 150 1049 8.0 60 1826 8.0 85 1534 8.0 100 1414 8.0 200 1000 8.0 80 1581 4.0 4500 129 4.0 7000 104 4.0 2500 173 4.0 3000 158 4.0 4000 137 5000 122 4.0 6.0 3000 158 4.0 1200 266 6.0 1300 291 6.0 1200 266 6.0 750 383 6.0 530 456 6.0 575 437 6.0 700 348 6.0 750 337 6.0 800 326 6.0 900 307 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 900 833 779 698 1434 1382 1157 1034 1014 944 597 1318 1103 900 779 636 1056 1014 944 817 779 1157 944 1643 1381 1273 900 1423 116 94 156 142 123 110 142 239 262 239 345 410 393 313 303 293 276 mA at +85C 100 kHz mA at +125C 100 kHz 400 370 346 310 637 614 514 460 451 420 265 586 490 400 346 283 469 451 420 363 346 514 420 730 614 566 400 632 52 42 69 63 55 49 63 106 116 106 153 182 175 139 135 130 123 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 14 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 4.7 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 15 15 15 15 15 15 22 22 22 22 22 22 22 33 33 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 V/7343-20 X/7343-43 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T495B475(1)025A(2)E1K0 T495B685(1)025A(2)E1K0 T495B685(1)025A(2)E1K5 T495C685(1)025A(2)E400 T495C685(1)025A(2)E490 T495C685(1)025A(2)E500 T495B106(1)025A(2)E750 T495C106(1)025A(2)E275 T495C106(1)025A(2)E300 T495C106(1)025A(2)E450 T495D106(1)025A(2)E1K2 T495C156(1)025A(2)E300 T495D156(1)025A(2)E100 T495D156(1)025A(2)E230 T495D156(1)025A(2)E275 T495V156(1)025A(2)E500 T495X156(1)025A(2)E200 T495C226(1)025A(2)E275 T495C226(1)025A(2)E280 T495C226(1)025A(2)E300 T495C226(1)025A(2)E900 T495D226(1)025A(2)E200 T495D226(1)025A(2)E230 T495X226(1)025A(2)E225 T495D336(1)025A(2)E090 T495D336(1)025A(2)E100 T495D336(1)025A(2)E150 T495D336(1)025A(2)E200 T495D336(1)025A(2)E225 T495D336(1)025A(2)E230 T495D336(1)025A(2)E300 T495X336(1)025A(2)E100 T495X336(1)025A(2)E175 T495X336(1)025A(2)E180 T495X336(1)025A(2)E200 T495X476(1)025A(2)E080 T495X476(1)025A(2)E100 T495X476(1)025A(2)E120 T495X476(1)025A(2)E150 T495X476(1)025A(2)E185 T495X476(1)025A(2)E200 T495D476(1)025A(2)E100 T495D476(1)025A(2)E120 T495D476(1)025A(2)E130 T495D476(1)025A(2)E150 1.2 1.7 1.7 1.7 1.7 1.7 2.5 2.5 2.5 2.5 2.5 3.8 3.8 3.8 3.8 3.8 3.8 5.5 5.5 5.5 5.5 5.5 5.5 5.5 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 6.0 1000 292 6.0 1000 292 6.0 1500 238 6.0 400 524 6.0 490 474 6.0 500 469 6.0 750 337 6.0 275 632 6.0 300 606 6.0 450 494 6.0 1200 354 6.0 300 606 6.0 100 1225 4.0 230 808 6.0 275 739 6.0 500 500 4.0 200 908 6.0 275 632 6.0 280 627 8.0 300 606 6.0 900 350 6.0 200 866 6.0 230 808 4.0 225 856 6.0 90 1291 6.0 100 1225 6.0 150 1000 6.0 200 866 6.0 225 816 6.0 230 808 6.0 300 707 4.0 100 1285 4.0 175 971 180 957 4.0 4.0 200 908 6.0 80 1436 6.0 100 1285 6.0 120 1173 6.0 150 1049 6.0 185 944 6.0 200 908 6.0 100 1225 6.0 120 1118 6.0 130 1074 6.0 150 1000 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 263 263 214 472 427 422 303 569 545 445 319 545 1103 727 665 450 817 569 564 545 315 779 727 770 1162 1103 900 779 734 727 636 1157 874 861 817 1292 1157 1056 944 850 817 1103 1006 967 900 mA at +85C 100 kHz mA at +125C 100 kHz 117 117 95 210 190 188 135 253 242 198 142 242 490 323 296 200 363 253 251 242 140 346 323 342 516 490 400 346 326 323 283 514 388 383 363 574 514 469 420 378 363 490 447 430 400 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 15 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage DF % at +20C 120 Hz Max VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 47 68 68 68 68 68 68 100 100 0.33 0.47 0.47 0.47 0.47 0.47 1 1 1 1 1 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 10 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 V/7343-20 X/7343-43 C/6032-28 D/7343-31 D/7343-31 D/7343-31 T495D476(1)025A(2)E250 T495D686(1)025A(2)E150 T495D686(1)025A(2)E200 T495X686(1)025A(2)E125 T495X686(1)025A(2)E130 T495X686(1)025A(2)E150 T495X686(1)025A(2)E200 T495X107(1)025A(2)E150 T495E107(1)025A(2)E100 T495A334(1)035A(2)E6K0 T495A474(1)035A(2)E4K0 T495B474(1)035A(2)E1K5 T495B474(1)035A(2)E2K2 T495B474(1)035A(2)E2K5 T495B474(1)035A(2)E11K T495A105(1)035A(2)E3K0 T495B105(1)035A(2)E1K5 T495B105(1)035A(2)E1K7 T495B105(1)035A(2)E2K0 T495B105(1)035A(2)E7K0 T495B225(1)035A(2)E1K5 T495B225(1)035A(2)E2K0 T495B225(1)035A(2)E4K0 T495C225(1)035A(2)E750 T495B335(1)035A(2)E1K0 T495B335(1)035A(2)E900 T495C335(1)035A(2)E525 T495C335(1)035A(2)E550 T495C335(1)035A(2)E600 T495B475(1)035A(2)E850 T495B475(1)035A(2)E1K0 T495C475(1)035A(2)E450 T495C475(1)035A(2)E500 T495C475(1)035A(2)E600 T495D475(1)035A(2)E300 T495C685(1)035A(2)E1K8 T495D685(1)035A(2)E150 T495D685(1)035A(2)E300 T495D685(1)035A(2)E400 T495V685(1)035A(2)E600 T495X685(1)035A(2)E300 T495C106(1)035A(2)E400 T495D106(1)035A(2)E120 T495D106(1)035A(2)E125 T495D106(1)035A(2)E130 11.8 17.0 17.0 17.0 17.0 17.0 17.0 25.0 25.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 0.8 0.8 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 2.4 2.4 3.5 3.5 3.5 3.5 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage ESR m at 20C mA at 100 kHz +25C 100 Max kHz 6.0 250 775 10.0 150 1000 10.0 200 866 6.0 125 1149 6.0 130 1127 6.0 150 1049 6.0 200 908 10.0 150 1049 8.0 100 1414 4.0 6000 112 4.0 4000 137 4.0 1500 238 4.0 2200 197 4.0 2500 184 4.0 11000 88 4.0 3000 158 4.0 1500 238 4.0 1700 224 4.0 2000 206 4.0 7000 110 6.0 1500 238 6.0 2000 206 6.0 4000 146 6.0 750 383 6.0 1000 292 6.0 900 307 6.0 525 458 6.0 550 447 6.0 600 428 6.0 850 316 6.0 1000 292 6.0 450 494 6.0 500 469 600 428 6.0 6.0 300 707 6.0 1800 247 6.0 150 1000 6.0 300 707 6.0 400 612 6.0 600 456 4.0 300 742 6.0 400 524 4.0 120 1118 6.0 125 1095 6.0 130 1074 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 698 900 779 1034 1014 944 817 944 1273 101 123 214 177 166 79 142 214 202 185 99 214 185 131 345 263 276 412 402 385 284 263 445 422 385 636 222 900 636 551 410 668 472 1006 986 967 mA at +85C 100 kHz mA at +125C 100 kHz 310 400 346 460 451 420 363 420 566 45 55 95 79 74 35 63 95 90 82 44 95 82 58 153 117 123 183 179 171 126 117 198 188 171 283 99 400 283 245 182 297 210 447 438 430 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 16 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 22 22 22 22 22 22 22 22 22 22 22 22 33 33 33 33 33 33 33 47 47 47 47 1 1 2.2 3.3 4.7 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 X/7343-43 X/7343-43 X/7343-43 X/7343-43 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 X/7343-43 X/7343-43 X/7343-43 X/7343-43 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 T495D106(1)035A(2)E250 T495D106(1)035A(2)E260 T495D106(1)035A(2)E300 T495D106(1)035A(2)E1K0 T495V106(1)035A(2)E600 T495X106(1)035A(2)E175 T495X106(1)035A(2)E200 T495X106(1)035A(2)E250 T495X106(1)035A(2)E260 T495C156(1)035A(2)E350 T495D156(1)035A(2)E225 T495D156(1)035A(2)E260 T495D156(1)035A(2)E300 T495X156(1)035A(2)E200 T495X156(1)035A(2)E225 T495X156(1)035A(2)E250 T495X156(1)035A(2)E260 T495D226(1)035A(2)E125 T495D226(1)035A(2)E200 T495D226(1)035A(2)E250 T495D226(1)035A(2)E260 T495D226(1)035A(2)E300 T495X226(1)035A(2)E125 T495X226(1)035A(2)E130 T495X226(1)035A(2)E180 T495X226(1)035A(2)E200 T495X226(1)035A(2)E260 T495X226(1)035A(2)E275 T495X226(1)035A(2)E300 T495D336(1)035A(2)E200 T495D336(1)035A(2)E300 T495X336(1)035A(2)E100 T495X336(1)035A(2)E175 T495X336(1)035A(2)E250 T495X336(1)035A(2)E260 T495E336(1)035A(2)E200 T495X476(1)035A(2)E185 T495X476(1)035A(2)E200 T495X476(1)035A(2)E230 T495X476(1)035A(2)E300 T495C105(1)050A(2)E1K3 T495C105(1)050A(2)E1K6 T495D225(1)050A(2)E600 T495D335(1)050A(2)E700 T495D475(1)050A(2)E275 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 11.6 11.6 11.6 11.6 11.6 11.6 11.6 16.5 16.5 16.5 16.5 0.5 0.5 1.1 1.7 2.4 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 6.0 250 775 6.0 260 760 6.0 300 707 6.0 1000 387 6.0 600 456 6.0 175 971 6.0 200 908 4.0 250 812 4.0 260 797 6.0 350 561 6.0 225 816 6.0 260 760 6.0 300 707 6.0 200 908 6.0 225 856 6.0 250 812 6.0 260 797 6.0 125 1095 6.0 200 866 6.0 250 775 6.0 260 760 6.0 300 707 6.0 125 1149 6.0 130 1127 6.0 180 957 6.0 200 908 6.0 260 797 6.0 275 775 6.0 300 742 6.0 200 866 6.0 300 707 6.0 100 1285 6.0 175 971 250 812 6.0 6.0 260 797 6.0 200 1000 8.0 185 944 8.0 200 908 8.0 230 847 8.0 300 742 4.0 1300 291 4.0 1600 262 6.0 600 500 6.0 700 463 6.0 275 739 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 698 684 636 348 410 874 817 731 717 505 734 684 636 817 770 731 717 986 779 698 684 636 1034 1014 861 817 717 698 668 779 636 1157 874 731 717 900 850 817 762 668 262 236 450 417 665 mA at +85C 100 kHz mA at +125C 100 kHz 310 304 283 155 182 388 363 325 319 224 326 304 283 363 342 325 319 438 346 310 304 283 460 451 383 363 319 310 297 346 283 514 388 325 319 400 378 363 339 297 116 105 200 185 296 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 17 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Table 1 - Ratings & Part Number Reference cont'd Rated Rated Voltage Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min 50 50 50 50 50 50 50 50 50 50 50 50 50 50 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 15 15 15 D/7343-31 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T495D475(1)050A(2)E300 T495X475(1)050A(2)E300 T495D685(1)050A(2)E190 T495D685(1)050A(2)E200 T495D685(1)050A(2)E275 T495D685(1)050A(2)E300 T495D685(1)050A(2)E400 T495X685(1)050A(2)E300 T495X106(1)050A(2)E250 T495X106(1)050A(2)E260 T495X106(1)050A(2)E300 T495X156(1)050A(2)E200 T495X156(1)050A(2)E250 T495X156(1)050A(2)E300 2.4 2.4 3.4 3.4 3.4 3.4 3.4 3.4 5.0 5.0 5.0 7.5 7.5 7.5 VDC at 85C F KEMET/EIA (See below for part options) A +20C Max/5 Min Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR m at 20C mA at 100 kHz +25C 100 Max kHz 6.0 300 707 4.0 300 742 6.0 190 889 6.0 200 866 6.0 275 739 6.0 300 707 6.0 400 612 6.0 300 742 8.0 250 812 6.0 260 797 6.0 300 742 6.0 200 908 6.0 250 812 6.0 300 742 m at 20C mA at +25C % at +20C 100 kHz 100 kHz 120 Hz Max Max % at +20C 120 Hz Max DF ESR Maximum Operating Temp Maximum Allowable Ripple Current mA at +85C 100 kHz 636 668 800 779 665 636 551 668 731 717 668 817 731 668 mA at +85C 100 kHz mA at +125C 100 kHz 283 297 356 346 296 283 245 297 325 319 297 363 325 297 mA at +125C 100 kHz Maximum Allowable Ripple Current C 125 125 125 125 125 125 125 125 125 125 125 125 125 125 C Maximum Operating Temp MSL Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C MSL (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum), N = Non-Magnetic 100% Tin (Sn) or M = Non-Magnetic (SnPb). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 18 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Recommended Voltage Derating Guidelines 85C to 125C 120% VR 67% of VR 100% % Change in working DC voltage with temperature Recommended maximum application voltage 50% of VR % Working Voltage -55C to 85C 33% of VR 80% % Change in Working DC Voltage with Temperature 67% 60% 40% 20% 0% -55 Recommended Maximum Application Voltage (As % of Rated Voltage) 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T 25C 1.00 T 85C 0.90 T 125C 0.40 T = Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. KEMET Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts at 25C w/+20C Rise A B C D X E S T U V T510X T510E 3216-18 3528-21 6032-28 7343-31 7343-43 7360-38 3216-12 3528-12 6032-15 7343-20 7343-43 7360-38 75 85 110 150 165 200 60 70 90 125 270 285 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = Z P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 19 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216-18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528-21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 M 3528-15 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032-28 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 U 6032-15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343-31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 E1 7360-38 3.25 2.77 3.67 10.22 7.30 3.13 2.37 3.87 9.12 6.80 3.03 1.99 4.03 8.26 6.54 T 3528-12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 V 7343-21 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X 7343-43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 1 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 20 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Soldering Process The KEMET families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds Ramp-up Rate (TL to TP) 3C/second maximum 3C/second maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** 20 seconds maximum 30 seconds maximum 6C/second maximum 6C/second maximum 6 minutes maximum 8 minutes maximum Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) Time 25C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Temperature Hand soldering should be performed with care due to the package body surface that is facing up during assembly reflow. difficulty in process control. If performed, care should be * For Case Size height > 2.5 mm ** For Case Size height 2.5 mm taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow TP tP Maximum Ramp Up Rate = 3C/second occurs. Once reflow occurs, the iron should be removed Maximum Ramp Down Rate = 6C/second TL immediately. "Wiping" the edges of a chip and heating the top tL surface is not recommended. Tsmax Tsmin 25 ts 25C to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 21 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Construction Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Tantalum Wire Leadframe (- Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case MnO2 (Second Layer) Washer Ta2O5 Dielectric (First Layer) Tantalum Capacitor Marking Date Code * 1st digit = last number of year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2nd and 3rd digit = week of the year 01 = 1st week of the year to 52 = 52nd week of the year Polarity Indicator (+) Picofarad Code KEMET ID Rated Voltage Date Code* * 230 = 30th week of 2012 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 22 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Tape & Reel Packaging Information KEMET's molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (-) Embossment Top tape thickness 0.10 mm (0.004") maximum thickness 180 mm (7.0") or 330 mm (13.") 8 mm (0.315") or 12 mm (0.472") Table 3 - Packaging Quantity Case Code KEMET S T M U L W Z V A B C D Q Y X E/T428P H O EIA 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-12 7343-40 7343-43 7360-38 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 12 12 2,500 3,000 2,500 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 1,000 500 500 500 1,000 250 10,000 10,000 8,000 5,000 3,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 3,000 2,000 2,000 2,000 2,500 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 23 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 OD0 P0 (10 pitches cumulative tolerance on tape 0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 OD1 Cover Tape User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 1.5 + 0.10/-0.0 (0.059 +0.004/-0.0) 12 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 0.10 4.0 0.10 2.0 0.05 (0.069 0.004) (0.157 0.004) (0.079 0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 0.05 2.0 0.05 or 4.0 0.10 (0.138 0.002) (0.079 0.002 or 0.157 0.004) 2.0 0.05 (0.079 0.002) or 5.5 0.05 4.0 0.10 (0.157 0.004) or (0.217 0.002) 8.0 0.10 (0.315 0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 24 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 T) s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline S) Ao Figure 3 - Maximum Lateral Movement Figure 4 - Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Bending Radius R T2009_T495 * 10/24/2018 25 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (O 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm Variable Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 26 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 - Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 27 Tantalum Surface Mount Capacitors - Low ESR T495 Surge Robust MnO2 KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2009_T495 * 10/24/2018 28