26
373028
27 29 3331 32 3534 36 4038 39 4241
A1 A2 2
18
10
135
476 98
17
A3 A4
21
A1 A7
106
4
35879
A3
A2 A4
1211 13 15
14 17
16
A6
A5
9
17
16 1918 21
20 23
22
A1 A2 A3 1
31
27
25
24 26 2928 30
3
25
476
15
8
32
A4 7
31
27
25 26 2928 30
3
13
125
46
353332 34 3736 38
11
810912
4039 41
A1 A2
30 3231 3433
16
13
25
4
42
3635 3837 4039 41
76 98 11
10 13
12
46
44
43 45
15
14
29
A1
10
A1 A2 21
1211 14
13 1615 17
6
4
357 98 A3 A4
18
1412 13 1615 17
A1 A2 13
25
476
22
2019 21
98 11
10 A3 A1
2016
14 15 18
17 19 21 22 23 24 25
13
25
476 11
9
810 13
12 A2
A1 A2 A3 A5
A4 A6 A7 A8 A1 A2 A4
A3 A5 A6 13
2
6
5
4
7
A1
7
A2 1
8
3
2
109
5
4
1211
6A3 A4 A5
1 2 345A2A1 A3
3
1
5
4
2A4
7
A3 A2 54
10 9
32
8
A11
6
A1 1
8
2
109
34
11 12 14
56
13
7
15
A2
12
12
11
4
13
35
14 15
7
A1 6
16 17
8
18 19
910
20
4
1
3
A1 2A1 A2 A3 A1
35
4
21 A2 13
87
2A1
9
4
10
6
5
A1 A3
SHELL SIZE 2
5W1 3W3 3WK3*
5W5 9W4
8W8
13W3
13W6
25W3
24W7 36W4 43W2
46W4
47W1
27W2
17W2
17W5
21W1
21WA4
7W2 11W1
Combo-D
Sub-D
1DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
Combo-D Series connectors permit mixed contact combinations of
power, shielded, high voltage and signal contacts within the same connec-
tor body. Twenty connector variants are offered in six standard shell sizes.
Two performance levels of Combo-D Series connectors are offered.
The CBD Series connectors are professional quality connectors recom-
mended for use in sheltered, noncorrosive indoor and outdoor environ-
ments having normal ventilation, but without temperature or humidity con-
trols. The CBM Series connectors are militar y quality connectors recom-
mended for use in sheltered, mildly corrosive environments having a wide
range of temperature, pressure and humidity changes. These connectors
will meet the applicable perf ormance and dimensional requirements of IEC
807-2, Performance Level One and Two, and D.E.S.C. 85039.
Combo-D Series connectors utilize precision machined signal contacts.
Connector variants are available with contact terminations for solder and
straight and 90° printed board mount terminations featuring a choice of
inch or metric printed board footprints.
Power, shielded and high voltage contacts are remo vab le, ha ving solder
and straight and 90° printed board mount terminations. P ow er and shield-
ed contacts are available with crimp terminations.
For low level shielding requirements, ferr ite inductors may be attached
to both signal and power contacts of connectors having contact ter mina-
tions which are straight or 90° angled for printed board mounting applica-
tions. Additional details may be obtained from the factory Applications
Engineering Department.
The female power contacts feature the Large Surface Area (L.S.A.)
closed entry contact design which provides maximum mating surfaces
between male and f emale contacts and reduced contact resistance during
operation.
A wide assor tment of printed board mounting hardware, cable support
hoods, and locking systems is available from stock.
A blind mating system is available for applications requiring connector
coupling in recessed areas or mobile power coupling systems.
CBD SERIES CONTACT VARIANTS
FACE VIEW OF MALE OR REAR VIEW OF FEMALE
Size 20 Fixed Signal Contacts
Size 8 Removable Power, Shielded
and High Voltage Contacts
Military/Industrial
Quality Connectors
U.L. Recognized CSA Recognized
File #E49351 File #LR54219
D.E.S.C. 85039
Telecommunication
U.L. File #E140980
SHELL SIZE 3
SHELL SIZE 4
SHELL SIZE 6
SHELL SIZE 5
*3WK3: M variant contains 2 male
contacts and 1 female contact
F variant contains 2 female
contacts and 1 male contact
SHELL SIZE 1
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
2
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
CBD/CBM SERIES
COMBO-D SERIES TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator: Glass filled polyester per MIL-M-24519 UL
94V-0, blue color, and composite.
Signal Contacts: Male contacts-precision machined brass
alloy. Female contacts-precision machin-
ed high tensile phosphor bronze.
Signal Contact Plating: Gold flash ov er nickel plate and gold 0.000050
[1.27µ] over nickel plate. Other finishes avail-
able upon request.
Power Contacts: Machined of high conductivity copper
alloy for both male and female contacts.
Power Contact Plating: Gold flash over nickel. Other finishes avail-
able upon request.
Shielded and High Male contacts-precision machined brass.
Voltage Contacts: Female contacts-precision machined high
tensile phosphor bronze.
Shielded and High Voltage Signal contact-gold flash over nickel.
Contact Plating: Other finishes av ailab le upon request.
Shells: Steel or brass with tin plate; zinc plate with
dichromate seal, stainless steel passivated.
Other materials and finishes available upon
request.
Mounting Spacers Nylon plastic, or brass with tin plate; zinc
and Brackets: plate with dichromate seal.
Push-On Fasteners: Phosphor bronze and beryllium copper with
tin plate.
Jackscrew Systems: Steel with zinc plate and dichromate seal,
or clear zinc plate.
Hoods: Composite and plastic, UL 94V-0, brass or
steel with zinc plate and dichromate seal.
ELECTRICAL CHARACTERISTICS:
SIGNAL CONTACTS
Contact Current Rating: 7.5 amperes nominal.
Initial Contact Resistance: 0.008 ohms maximum.
Proof Voltage: 1000 V r .m.s .
POWER CONTACTS
Contact Current Rating: 10, 15, 20, 30 and 40 amperes nominal.
Initial Contact Resistance: 0.0005 ohms max. per IEC 512-2, Test 2b.
Proof Voltage: 1000 V r .m.s .
SHIELDED CONTACTS
Initial Contact Resistance: 0.008 ohms maximum.
Nominal Impedance: 50 ohms.
Insertion Loss: -0.46 dB at 1 GHz
-1.5 dB at 2 GHz
VSWR: 1.15 average at 1 GHz
1.56 average at 2 GHz
Above values measured using frequency domain techniques.
Proof Voltage: 1000 V r .m.s .
HIGH V OLTA GE CONTACTS
Flash over Voltage: 3600 V r .m.s .
Proof Voltage: 2700 V r .m.s .
Initial Contact Resistance: 0.008 ohms maximum.
CONNECTOR
Insulator Resistance: 5 G ohms.
Clearance and
Creepage Distance: 0.039 inch [1.0mm] minimum.
Working V oltage: 300 V r .m.s .
MECHANICAL CHARACTERISTICS:
Signal Contacts, Size 20 contacts, male contact-0.040 inch
Fixed: [1.02mm] diameter. CBD Series has open
entry design female contacts. CBM Series
has closed entry design female contacts.
Contact Retention Signal-9 lbs. [40N]. Power, shielded and
in Insulator: high voltage-22 lbs [98N].
Resistance to Solder Iron Heat: 500˚F [260˚C] for 10 seconds duration
per IEC 512-6.
Signal Contact Solder contacts - 0.042 inch [1.06mm]
Terminations: minimum hole diameter for 20 AWG [0.5
mm2] wire maximum.
Straight Printed Board Mount – 0.028 inch
[0.71mm] diameter.
90° Printed Board Mount – 0.028 inch
[0.71 mm] diameter.
Power Contacts, Size 8 contact, male contact – 0.142 inch
Removable, Crimp [3.61mm] diameter. Female contact fea-
or Solder Termination: tures Large Surface Area (L.S.A.) closed
entry contact design utilizing BeCu
mechanical retention member. Male and
female contacts have terminations for
wire sizes 8, 12 and 16 AWG.
Power Contacts, Size 8 contact, male contact – 0.142 inch
Printed Board Mount: [3.61mm] diameter. Printed board termina-
tions with 0.078 inch [1.98mm], 0.093 inch
[2.36mm] and 0.125 inch [3.18mm] diameters.
Shielded Contacts, See table of maximum cab le sizes for contact
Removable: termination dimensions.
High V oltage Contacts: Straight and 90° terminations – 0.041 inch
[1.04mm] minimum hole diameter.
Shells: Male shells may be dimpled for EMI/ESD
ground paths.
Polarization: Trapezoidally shaped shells and polarized
jackscrews.
Mounting to Angle Brackets: Jackscrews and riveted fasteners with
0.120 inch [3.05mm] diameter hole, and
threaded riveted fasteners with 4-40
threads and nylon inserts.
Mounting to Printed Board: Rapid installation push-on fasteners and
threaded posts.
Locking Systems: Jackscrews.
Mechanical Operations, CBD Series, 500 operations, CBM
Signal Contacts: Series, 1,000 operations per IEC 512-5.
CLIMATIC CHARACTERISTICS:
Temperature Rang e: -55°C to +125°C.
Damp Heat, Steady State: 10 days.
SHELL SIZES A
±0.015
[0.38]
B
±0.005
[0.13]
B1
±0.005
[0.13]
C
±0.005
[0.13]
D
±0.005
[0.13]
D1
±0.005
[0.13]
E
±0.015
[0.38]
G
±0.010
[0.25]
H
±0.010
[0.25]
K
±0.005
[0.13]
M
±0.010
[0.25]
SHELL SIZE 1 MALE 1.213
[30.81] 0.666
[16.92] 0.984
[24.99] 0.329
[8.36] 0.494
[12.55] 0.759
[19.28] 0.422
[10.72] 0.233
[5.92] 0.422
[10.72]
SHELL SIZE 1 FEMALE 1.213
[30.81] 0.643
[16.33] 0.984
[24.99] 0.311
[7.90] 0.494
[12.55] 0.759
[19.28] 0.422
[10.72] 0.243
[6.17] 0.429
[10.90]
SHELL SIZE 2 MALE 1.541
[39.14] 0.994
[25.25] 1.312
[33.32] 0.329
[8.36] 0.494
[12.55] 1.083
[27.51] 0.422
[10.72] 0.233
[5.92] 0.422
[10.72]
SHELL SIZE 2 FEMALE 1.541
[39.14] 0.971
[24.66] 1.312
[33.32] 0.311
[7.90] 0.494
[12.55] 1.083
[27.51] 0.422
[10.72] 0.243
[6.17] 0.429
[10.90]
SHELL SIZE 3 MALE 2.088
[53.04] 1.534
[38.96] 1.852
[47.04] 0.329
[8.36] 0.494
[12.55] 1.625
[41.28] 0.422
[10.72] 0.230
[5.84] 0.426
[10.82]
SHELL SIZE 3 FEMALE 2.088
[53.04] 1.511
[38.38] 1.852
[47.04] 0.311
[7.90] 0.494
[12.55] 1.625
[41.28] 0.422
[10.72] 0.243
[6.17] 0.429
[10.90]
SHELL SIZE 4 MALE 2.729
[69.32] 2.182
[55.42] 2.500
[63.50] 0.329
[8.36] 0.494
[12.55] 2.272
[57.71] 0.422
[10.72] 0.230
[5.84] 0.426
[10.82]
SHELL SIZE 4 FEMALE 2.729
[69.32] 2.159
[54.84] 2.500
[63.50] 0.311
[7.90] 0.494
[12.55] 2.272
[57.71] 0.422
[10.72] 0.243
[6.17] 0.429
[10.90]
SHELL SIZE 5 MALE 2.635
[66.93] 2.079
[52.81] 2.406
[61.11] 0.441
[11.20] 0.605
[15.37] 2.178
[55.32] 0.534
[13.56] 0.230
[5.84] 0.426
[10.82]
SHELL SIZE 5 FEMALE 2.635
[66.93] 2.064
[52.43] 2.406
[61.11] 0.423
[10.74] 0.605
[15.37] 2.178
[55.32] 0.534
[13.56] 0.243
[6.17] 0.429
[10.90]
SHELL SIZE 6 MALE 2.729
[69.32] 2.212
[56.18] 2.500
[63.50] 0.503
[12.78] 0.668
[16.97] 2.302
[58.47] 0.596
[15.14] 0.230
[5.84] 0.426
[10.82]
SHELL SIZE 6 FEMALE 2.729
[69.32] 2.189
[55.60] 2.500
[63.50] 0.485
[12.32] 0.668
[16.97] 2.302
[58.47] 0.596
[15.14] 0.243
[6.17] 0.429
[10.90]
Combo-D
Sub-D
3DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
CBD3W3M00000 CBD5W5M00000
C
A
E
B
B1
D
D1
K
M
G
H
0.220 [5.59]
Max.
10° Typ.
0.120±0.010 [3.05±0.25]
0.032 [0.81]
Total diametral float Ø0.086
+0.005
-0.000 [Ø2.18
+0.13
-0.00 ]
Mounting hole, two places
0.036±0.008
[0.91±0.20]
0.050±0.010
[1.27±0.25]
for stainless steel shell (0 option)
two places (02 option)
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
Ø0.120±0.005 [Ø3.05±0.13]
Mounting hole, two places
Ø0.154 [3.91] Mounting hole,
STANDARD SHELL ASSEMBLY
OPTIONAL SHELL ASSEMBLY
WITH UNIVERSAL FLOAT MOUNTS [F]
OPTIONAL SHELL ASSEMBLY [0, 02]
CODE
NUMBER D Ø
3---------
35 0.078
[1.98]
36 0.093
[2.36]
37 0.125
[3.18]
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
4
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
CBD/CBM SERIES
SOLDER CONNECTOR
CODE 2
20 AWG max.
[0.5 mm2]
0.125
[3.18]
0.170
[4.32]
0.250
[6.35]
0.010 Min.
[0.25]
0.028 Ø
[0.71]
For solder contacts,
specify code 2 in step 4
of ordering information.
Fixed male and female polarized jackscrews available.
Specify code T6 in step 7 of ordering information.
Typical par t number: CBD7W2M200T60
Typical par t number: CBD7W2M200T0
Typical par t number: CBD17W2F35S60T2X
CBD17W2F200E0 with FS4008D contacts. CBD17W2M55B30T20
Fixed female
jackscrews
Fixed female jackscrews
Fixed female
jackscrew Fixed male
jackscrew
0.345
[8.76]
Swaged spacer with
push-on fastener,
phosphor bronze.
For straight printed board
mount contacts, specify
code no. in step 4 of
ordering information.
STRAIGHT PRINTED BOARD MOUNT CONNECTOR
CODE 3, 35, 36 AND 37
Combo-D
Sub-D
5DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
COMPLIANT PRESS-FIT CONNECTOR
CODE 93
CBD/CBM SERIES
Screw, 4-40
0.045 [1.14]
0.225 [5.72] max.
0.225 [5.72]
Swaged spacer
Fixed female jackscrews
0.265 [6.73]
customer supplied
with 4-40 threads
thread length in
mounting spacer
SUGGESTED PRINTED BOARD HOLE SIZES
TYPICAL PART NUMBER:
CBD17W2M93S0T20
Size 20 contacts Size 8 contacts
Suggest 0.120 [3.05] Ø hole for mounting holes.
DRILLED HOLE
0.0005 [13µ] MINIMUM
SOLDER THICKNESS
DRILLED HOLE
0.0005 [13µ] MINIMUM
SOLDER THICKNESS
0.0010 [25µ] MINIMUM
COPPER PLATE
THICKNESS
Ø0.0394+0.0035-0.0024
[1.000+0.090-0.060]
FINISHED HOLE
0.0010 [25µ] MINIMUM
COPPER PLATE
THICKNESS
Ø0.119+0.002
[13.02+0.05]
FINISHED HOLE
TEMPERATURE RISE CURVE
Curve developed using CBD8W8M00000 and
CBD8W8F93S000 connectors and MC4008D contacts
and 8 awg (10.0mm2) size wire. All contacts under load.
RATED CURRENT (AMPS)
TEMPERATURE RISE (OC)
Note: For other PCB plating compositions, i.e. ENIG,
(Electroless Nickel, Immersion Gold),
consult T echnical Sales.
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
6
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
CBD/CBM SERIES
COMPLIANT TERMINATION PRESS-FIT CONNECTOR
INST ALLATION TOOLS
1/2 inch shaft for
Arbor Press.
Replaceable
Seating Pins
Female Connector
Seating Tool
(Male - not shown)
Single Contact
Insertion Tool Single Contact
Remov al Tool
Arbor Press
Positronic recommended tools for CBD Series Connectors and Contacts
CONTACT
VARIANT CONNECTOR SEATING SINGLE CONTACT INSERTION SINGLE
CONTACT
REMOVAL
MALE FEMALE MALE FEMALE
5W1 9512-1-0-41 9512-18-0-41
9512-103-0-0
FOR
SIZE 20
CONTACTS
ONLY
SIZE 8
CONTACTS
ARE NOT
REPAIRABLE
9512-104-0-0
FOR
SIZE 20
CONTACTS
ONLY
SIZE 8
CONTACTS
ARE NOT
REPAIRABLE
9512-105-0-0
FOR
SIZE 20
CONTACTS
ONLY
SIZE 8
CONTACTS
ARE NOT
REPAIRABLE
3W3 9512-2-0-41 9512-19-0-41
3WK3 CONTACT TECHNICAL SALES
7W2 9512-2-0-41 9512-20-0-41
11W1 9512-2-0-41 9512-21-0-41
5W5 9512-3-0-41 9512-22-0-41
9W4 9512-3-0-41 9512-23-0-41
13W3 9512-3-0-41 9512-24-0-41
17W2 9512-3-0-41 9512-25-0-41
21W1 9512-3-0-41 9512-26-0-41
8W8 9512-4-0-41 9512-27-0-41
13W6 9512-4-0-41 9512-28-0-41
17W5 9512-4-0-41 9512-29-0-41
21WA4 9512-4-0-41 9512-30-0-41
25W3 9512-4-0-41 9512-31-0-41
27W2 9512-4-0-41 9512-32-0-41
24W7 9512-5-0-41 9512-33-0-41
36W4 9512-5-0-41 9512-34-0-41
43W2 9512-5-0-41 9512-35-0-41
47W1 9512-5-0-41 9512-36-0-41
46W4 9512-16-0-41 9512-37-0-41
Arbor press for connector seating tools-9530-1-0 1 ton capacity 4 inch throat
Replacement pins for connector seating tools. Size 20 Female - 855-347-18-41
Size 8 Male - 855-347-19-41
90° PRINTED BOARD MOUNT POWER CONTACTS
90° printed board mount power contacts are mounted in connector when ordered.
✽FEMALE
CLOSED ENTRY, L.S.A.
0.142
[3.61] Ø
MALE
Combo-D
Sub-D
7DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
STRAIGHT PRINTED BOARD MOUNTED POWER CONTACTS
Straight printed board mount power contacts are mounted in connector when ordered.
0.170
[4.32] 0.626
[15.90]
0.142
[3.61]
0.634
[16.10]
✽FEMALE CLOSED ENTRY, L.S.A. MALE
Ø
Material - High conductivity copper alloy.
Plating - Gold flash over nickel.
0.000030 [0.75µ] gold over nickel available by adding -14 suffix on part number.
0.000050 [1.27µ] gold over nickel available by adding -15 suffix on part number.
Material - High conductivity copper alloy.
Plating - Gold flash over nickel.
0.000030 [0.75µ] gold over nickel available by adding -14 suffix on part number.
0.000050 [1.27µ] gold over nickel available by adding -15 suffix on part number.
✽Note: Female po wer contacts feature Lar ge
Surface Area (L.S.A.) closed entry
contact design which provides maxi-
mum mating surfaces between male
and female contacts and reduced
contact resistance during operation.
PART
NUMBER A Ø CURRENT
RATING
FDS4314D 0.078
[1.98] 15 Amps.
FDS4312D 0.094
[2.39] 20 Amps.
FDS4310D 0.125
[3.18] 30 Amps.
PART
NUMBER CURRENT A
REF. B Ø CSHELL
SIZE BEND
CODE
FRT4314D 15 Amps 0.580
[14.73] 0.078
[1.98] 0.339
[8.61] 1, 2, 3 & 4 55
FRT4414D 15 Amps 0.692
[17.58] 0.078
[1.98] 0.451
[11.46] 555
FRT4714D 15 Amps 0.661
[16.79] 0.078
[1.98] 0.420
[10.67] 1, 2, 3 & 4 75
FRT4814D 15 Amps 0.773
[19.63] 0.078
[1.98] 0.520
[13.21] 575
FRT4310D 30 Amps 1.051
[26.70] 0.125
[3.18] 0.810
[20.57] 1, 2, 3 & 4 57
FRT4410D 30 Amps 1.051
[26.70] 0.125
[3.18] 0.810
[20.57] 557
PART
NUMBER CURRENT A
REF. B Ø CSHELL
SIZE BEND
CODE
MRT4314D 15 Amps 0.580
[14.73] 0.078
[1.98] 0.339
[8.61] 1, 2, 3 & 4 55
MRT4414D 15 Amps 0.692
[17.58] 0.078
[1.98] 0.451
[11.46] 555
MRT4714D 15 Amps 0.661
[16.79] 0.078
[1.98] 0.420
[10.67] 1, 2, 3 & 4 75
MRT4814D 15 Amps 0.773
[19.63] 0.078
[1.98] 0.520
[13.21] 575
MRT4310D 30 Amps 1.051
[26.70] 0.125
[3.18] 0.810
[20.57] 1, 2, 3 & 4 57
MRT4410D 30 Amps 1.051
[26.70] 0.125
[3.18] 0.810
[20.57] 557
PART
NUMBER A Ø CURRENT
RATING
MDS4314D 0.078
[1.98] 15 Amps.
MDS4312D 0.094
[2.39] 20 Amps.
MDS4310D 0.125
[3.18] 30 Amps.
CBD/CBM SERIES
✽Note: Female power contacts feature Large
Surface Area (L.S.A.) closed entry
contact design which provides maxi-
mum mating surfaces between male
and female contacts and reduced
contact resistance during operation.
90° PRINTED BOARD MOUNT CONNECTOR
WITH 0.078 [1.98] Ø POWER CONTACTS
CODE 5 AND 55, 0.283 [7.19] CONTACT EXTENSION
(15 amps nominal)
0.220 [5.59] Max.
0.220 [5.59] Max.
0.339
[8.61]
0.810
[20.57]
0.810
[20.57]
0.112 [2.84] Typ.
0.112
[2.84]
Typ.
±0.008
±0.008
0.112
[2.84] Typ.
0.112
[2.84] Typ.
0.028 [0.71] Ø
0.125 [3.18] Ø
0.170 [4.32]
Nominal
Fixed female
jackscrews
Fixed female
jackscrews
Specify code 5
or 57 in step 4 of
ordering information.
Specify code 5
or 55 in step 4 of
ordering information.
Numbering shown is rear view of
male and face view of female.
Push-on fastener,
beryllium copper.
0.028 [0.71] Ø
0.078 [1.98] Ø
0.170 [4.32]
Nominal
Numbering shown is rear view of
male and face view of female.
Push-on fastener,
beryllium copper.
0.451
[11.46]
Typical par t number:
CBD36W4F55R7NT2X
Typical par t number:
CBD17W2M57R7NT20
Typical par t number:
CBD17W2M55R7NT20
CBD***R7*** 0.283 [7.19] CONTACT EXTENSION
SHELL SIZE A B C D
SHELL SIZE 1 1.204
[30.58] 0.984
[24.99] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 2 1.532
[38.91] 1.312
[33.32] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 3 2.072
[52.63] 1.852
[47.04] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 4 2.720
[69.09] 2.500
[63.50] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 5 2.626
[66.70] 2.406
[61.11] 0.395
[10.03] 0.283
[7.19]
Typical par t number:
CBD36W4F57R7NT2X
CBD***R7*** 0.283 [7.19] CONTACT EXTENSION
SHELL SIZE A B C D
SHELL SIZE 1 1.204
[30.58] 0.984
[24.99] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 2 1.532
[38.91] 1.312
[33.32] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 3 2.072
[52.63] 1.852
[47.04] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 4 2.720
[69.09] 2.500
[63.50] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 5 2.626
[66.70] 2.406
[61.11] 0.395
[10.03] 0.283
[7.19]
Positronic Industries, Inc.
www.connectpositronic.com
90° PRINTED BOARD MOUNT CONNECTOR
WITH 0.125 [3.18] Ø POWER CONTACTS
CODE 5 AND 57, 0.283 [7.19] CONTACT EXTENSION
(30 amps nominal)
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
8
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
CBD/CBM SERIES
0.112
[2.84] Typ.
0.112
[2.84] Typ.
Combo-D
Sub-D
9DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
0.125 [3.18] Ø
Typ.
0.100 [2.54] Typ.
0.100 [2.54] Typ.
0.100 [2.54] Typ.
0.100 [2.54] Typ.
0.024 [0.61] Ø 0.078 [1.98] Ø
0.100 [2.54]
Typ.
0.170 [4.32]
Nominal
0.420
[10.67]
0.520
[13.21]
±0.008
0.220 [5.59]
Max.
Fixed female
jackscrews
Specify code 7
or 75 in step 4 of
ordering information.
0.125 [3.18] Ø
Typ.
±0.008
0.220 [5.59]
Max.
Fixed
female
jackscrews
Specify code 7
or 77 in step 4 of
ordering information.
Numbering shown is rear view
of male and face view of female.
Typical par t number:
CBD17W2M75R70T20
0.024 [0.61] Ø
0.125 [3.18] Ø
0.100 [2.54]
Typ.
0.170 [4.32]
Nominal
0.810 [20.57]
0.810
[20.57]
Numbering shown is rear view
of male and face view of female.
Typical par t number:
CBD17W2M77R70T20 Typical par t number:
CBD36W4M77R70T20
Typical par t number:
CBD36W4M75R70T20
METRIC SYSTEM 90° PRINTED BOARD MOUNT CONNECTOR
WITH 0.125 [3.18] Ø POWER CONTACTS
CODE 7 AND 77, 0.370 [9.40] CONTACT EXTENSION
(30 amps nominal)
CBD***R7*** 0.370 [9.40] CONTACT EXTENSION
SHELL SIZE A B C D
SHELL SIZE 1 1.204
[30.58] 0.984
[24.99] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 2 1.532
[38.91] 1.312
[33.32] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 3 2.072
[52.63] 1.852
[47.04] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 4 2.720
[69.09] 2.500
[63.50] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 5 2.626
[66.70] 2.406
[61.11] 0.470
[11.94] 0.370
[9.40]
CBD***R7*** 0.370 [9.40] CONTACT EXTENSION
SHELL SIZE A B C D
SHELL SIZE 1 1.204
[30.58] 0.984
[24.99] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 2 1.532
[38.91] 1.312
[33.32] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 3 2.072
[52.63] 1.852
[47.04] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 4 2.720
[69.09] 2.500
[63.50] 0.420
[10.67] 0.370
[9.40]
SHELL SIZE 5 2.626
[66.70] 2.406
[61.11] 0.470
[11.94] 0.370
[9.40]
METRIC SYSTEM 90° PRINTED BOARD MOUNT CONNECTOR
WITH 0.078 [1.98] Ø POWER CONTACTS
CODE 7 AND 75, 0.370 [9.40] CONTACT EXTENSION
(15 amps nominal)
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
10
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
CBD/CBM SERIES
Fixed female jackscrews
0.451[11.46]
0.170[4.32]
Nominal
0.507[12.88] 2.720
[69.09]
±0.008
2.500
[63.50]
0.028[0.71] Ø
0.078[1.98] Ø
0.112[2.84] Typ.
Shell size 6 connector
Push-on fastener,
beryllium copper
Numbering shown is rear view
of male and face view of female
Typical par t number:
CBD46W4M55R7NT20
0.283[7.19]-Specify
code 5 or 55 in step 4
of ordering information
Fixed female jackscrews
0.451[11.46]
0.170[4.32]
Nominal
2.720
[69.09]
±0.008
2.500
[63.50]
0.028[0.71] Ø
0.125[3.18] Ø
0.112[2.84] Typ.
0.810
[20.57]
Shell size 6 connector
Push-on fastener,
beryllium copper
Numbering shown is rear view of
male and face view of female
Typical par t number:
CBD46W4M57R7NT20
0.283[7.19]-Specify code 5
or 57 in step 4 of
ordering information
SHELL SIZE 6
90° PRINTED BOARD MOUNT CONNECTOR
WITH 0.078 [1.98] Ø POWER CONTACTS
CODE 5 AND 55, 0.283 [7.19] CONTACT EXTENSION
CONNECT OR V ARIANT 46W4
(15 amps nominal)
SHELL SIZE 6
90° PRINTED BOARD MOUNT CONNECTOR
WITH 0.125 [3.18] Ø POWER CONTACTS
CODE 5 OR 57, 0.283 [7.19] CONTACT EXTENSION
CONNECT OR V ARIANT 46W4
(30 amps nominal)
CODE
NO. 3, 35
& 37 5 & 55 7 & 75
X0.112
[2.84] 0.112
[2.84] 0.100
[2.54]
Y0.056
[1.42] 0.056
[1.42] 0.050
[1.27]
A0.100
[2.54] 0.112
[2.84] 0.100
[2.54]
B0.050
[1.27] 0.056
[1.42] 0.050
[1.27]
Combo-D
Sub-D
11 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
0.218 [5.54] TYP.
0.268 [6.81] TYP.
0.162 [4.11] TYP.
0.034 [0.86]
0.650 [16.51]
0.150 [3.81]
0.707 [17.96]
0.652 [16.56]
0.092 [2.34]
0.343 [8.71]
0.618 [15.70]
0.618 [15.70]
0.618 [15.70] TYP.
0.600 [15.24]
0.492 [12.50] TYP.
0.570 [14.48] TYP.
0.544 [13.82] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP. 0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.570 [14.48] TYP.
0.926 [23.52] TYP. 0.926 [23.52] TYP.
0.926 [23.52] TYP. 0.926 [23.52] TYP. 0.900 [22.86] TYP.
0.893 [22.68] TYP.
0.893 [22.68] TYP.
0.810 [20.57] TYP.
0.900 [22.86] TYP.
0.650 [16.51] TYP.
0.060 [1.52] TYP. A
TYP.
B
0.120 [3.05] TYP. 38 PLACES
0.810 [20.57]
0.810 [20.57]
0.893 [22.68] TYP.
1.250 [31.75] TYP.
0.306 [7.77] 0.570 [14.48] TYP.
0.926 [23.52] TYP.
0.306 [7.77]
0.270 [6.86] TYP. 0.270 [6.86] TYP.
0.054 [1.37] TYP.
0.054 [1.37] TYP.
0.108 [2.74] TYP.
0.108 [2.74] TYP.
0.108 [2.74] TYP.
0.109 [2.77] TYP. 0.109 [2.77] TYP.
0.109 [2.77] TYP. 0.109 [2.77] TYP. 0.109 [2.77] TYP.
0.109 [2.77] TYP.
0.109 [2.77] TYP.
0.109 [2.77] TYP.
43 PLACES
0.109 [2.77] TYP.
0.270 [6.86]
0.540 [13.72]
0.540 [13.72]
0.109 [2.77] TYP. 0.109 [2.77] TYP.
0.275 [6.99] TYP.
0.270 [6.86] TYP.
0.265 [6.73] TYP.
1.250 [31.75] TYP. 1.250 [31.75] TYP.
1.250 [31.75] TYP. 1.250 [31.75] TYP.
1.250 [31.75] TYP.
1.203 [30.56] TYP.
1.203 [30.56] TYP. 1.203 [30.56] TYP.
1.203 [30.56] TYP.
1.250 [31.75] TYP.
0.054 [1.37] TYP.
0.108 [2.74] TYP.
0.162 [4.11] TYP.
0.162 [4.11]
0.216 [5.49] TYP.
0.216 [5.49]
0.218 [5.54] TYP. 0.250 [6.35] TYP.
0.163 [4.14] TYP.
0.656 [16.66] TYP. 0.656 [16.66] TYP.
0.656 [16.66] TYP.
5W1 3W3/3WK3
5W5
8W8
9W4
7W2 11W1
13W3
17W2
17W5
25W3 27W2 24W7
36W4 43W2
46W4 47W1
21WA4
13W6
21W1
90° AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN WITH
0.078 [1.98] Ø, 0.094 [2.39] Ø AND 0.125 [3.18] Ø POWER CONTACTS
Hole identification shown for male connector, use mirror image for female connector.
Mount connector with mating face positioned to follow direction of arrow.
Suggest 0.045 [1.14] Ø hole for signal contact termination positions.
Suggest 0.098 [2.49] Ø hole for 0.078 [1.98] Ø power contact termination positions.
Suggest 0.114 [2.90] Ø hole for 0.094 [2.39] Ø power contact termination positions.
Suggest 0.145 [3.68] Ø hole for 0.125 [3.18] Ø power contact termination positions.
Suggest 0.123 ±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
47W1
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
12
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
13W3
90° PRINTED BOARD CONTACT HOLE PATTERN
WITH 0.125 [3.18] Ø POWER CONTACTS
Hole identification shown for male connector, use mirror image for female connector.
Mount connector with mating face positioned to follow direction of arrow.
CBD/CBM SERIES
0.218 [5.54] TYP.
0.268 [6.81] TYP. 2 PLACES
0.162 [4.11] TYP.
0.034 [0.86]
0.650 [16.51]
0.150 [3.81]
0.707 [17.96]
0.652 [16.56]
0.092 [2.34]
0.343 [8.71]
0.618 [15.70]
0.618 [15.70]
0.618 [15.70] TYP.
0.600 [15.24]
0.492 [12.50] TYP.
0.570 [14.48] TYP.
0.544 [13.82] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP. 0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.055 [1.40] TYP.
0.570 [14.48] TYP.
0.926 [23.52] TYP. 0.926 [23.52] TYP.
0.926 [23.52] TYP. 0.926 [23.52] TYP. 0.900 [22.86] TYP.
0.893 [22.68] TYP.
0.893 [22.68] TYP.
0.810 [20.57] TYP.
0.900 [22.86] TYP.
0.650 [16.51] TYP.
0.060 [1.52] TYP.
0.120 [3.05] TYP. 38 PLACES
0.810 [20.57]
0.810 [20.57]
0.893 [22.68] TYP.
1.250 [31.75] TYP.
0.306 [7.77] 0.570 [14.48] TYP.
0.926 [23.52] TYP.
0.306 [7.77]
0.270 [6.86] TYP. 0.270 [6.86] TYP.
0.054 [1.37] TYP.
0.054 [1.37] TYP.
0.108 [2.74] TYP.
3 PLACES
0.108 [2.74] TYP
6 PLACES.
0.108 [2.74] TYP. 3 PLACES
0.109 [2.77] TYP. 13 PLACES 0.109 [2.77] TYP. 16 PLACES
0.109 [2.77] TYP. 5 PLACES
0.109 [2.77] TYP. 10 PLACES 0.109 [2.77] TYP. 15 PLACES
0.109 [2.77] TYP. 16 PLACES
0.109 [2.77] TYP. 29 PLACES
0.109 [2.77] TYP.
43 PLACES
0.109 [2.77] TYP. 37 PLACES
0.270 [6.86]
0.540 [13.72]
0.540 [13.72]
0.109 [2.77] TYP. 20 PLACES 0.109 [2.77] TYP. 23
PLACES
0.275 [6.99] TYP. 3 PLACES
0.270 [6.86] TYP.
6 PLACES
0.265 [6.73] TYP.
5 PLACES
1.250 [31.75] TYP. 1.250 [31.75] TYP.
1.250 [31.75] TYP. 1.250 [31.75] TYP.
1.250 [31.75] TYP.
1.203 [30.56] TYP.
1.203 [30.56] TYP. 1.203 [30.56] TYP.
1.203 [30.56] TYP.
1.250 [31.75] TYP.
0.054 [1.37] TYP.
0.108 [2.74] TYP. 8 PLACES
0.162 [4.11] TYP.
0.162 [4.11]
0.216 [5.49] TYP.
0.216 [5.49]
0.218 [5.54] TYP. 0.250 [6.35] TYP. 3 PLACES
0.163 [4.14] TYP.
0.656 [16.66] TYP.
0.656 [16.66] TYP.
Suggest 0.045 [1.14] Ø hole for signal contact termination positions.
Suggest 0.145 [3.68] Ø hole for power contact termination positions.
Suggest 0.123±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
5W1
5W5
3W3/3WK3
9W4
7W2 11W1
17W2
13W6
25W3 27W2
36W4 43W2
46W4
24W7
17W5 21WA4
21W1 8W8
X TYP.
0.656 [16.66] TYP.
CODE
NO. 5 & 57 7 & 77
A0.471
[11.96] 0.390
[9.91]
B0.415
[10.54] 0.340
[8.64]
C0.359
[9.12] 0.290
[7.37]
X0.112
[2.84] 0.100
[2.54]
Y0.056
[1.42] 0.050
[1.27]
Combo-D
Sub-D
13 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
STRAIGHT PRINTED BOARD MOUNTED SHIELDED CONTACTS
Straight printed board mount shielded contacts are mounted in connector when ordered.
Suggest 0.045 [1.14] Ø hole
0.200
[5.08]
0.100
[2.54]
0.156
[3.96] 0.156
[3.96]
0.040
[1.02]
0.200
[5.08] 0.200
[5.08]
MALE
0.037 [0.94]
Across points
Ø
0.152
[3.86] Ø
Suggest 0.045 [1.14] Ø hole
0.200
[5.08]
0.100
[2.54]
0.040
[1.02]
0.162
[4.11]
0.162
[4.11]
FEMALE MALE
0.037 [0.94]
Across points
Ø0.152
[3.86] Ø
FDS4201D and MDS4201D
Contact hole pattern
FRT4201D and MRT4201D
Contact hole pattern
Material - Copper alloy with PTFE teflon insulator.
Plating: Signal contact - 0.000030 [0.75µ] gold over nickel
Contact body -Gold flash over nickel.
Signal contact - 0.000050 [1.27µ] gold over nickel
Contact body - 0.000030 [0.75µ] gold over nickel available
by adding -15 suffix on par t number.
*Technical characteristics are listed on page 21.
Material - Copper alloy with PTFE teflon insulator.
Plating: Signal contact - 0.000030 [0.75µ] gold over nickel
Contact body -Gold flash over nickel.
Signal contact - 0.000050 [1.27µ] gold over nickel
Contact body - 0.000030 [0.75µ] gold over nickel available
by adding -15 suffix on par t number.
*Technical characteristics are listed on page 21.
90° PRINTED BOARD MOUNT SHIELDED CONTACTS
90° printed board mount shielded contacts are mounted in connector when ordered.
PART
NO. ABC
FDS4201D 0.481
[12.22] 0.025
[0.64] 0.181
[4.60]
PART
NO. ABC
MDS4201D 0.489
[12.42] 0.025
[0.64] 0.181
[4.60]
PART
NO. ABCD
FRT4201D 0.827
[21.01] 0.240
[6.10] 0.259
[6.58] 0.470
[11.94]
PART
NO. A B C D
MRT4201D 0.829
[21.06] 0.240
[6.10] 0.253
[6.43] 0.470
[11.94]
FEMALE
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
14
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
CBD/CBM SERIES
STRAIGHT PRINTED BOARD MOUNT CONNECTOR WITH SHIELDED CONTACTS
CODE 65, CONNECTOR WITH FDS4201D OR MDS4201D CONTACTS
Fixed female jackscrews
Fixed female
jackscrews
Push-on fastener,
beryllium copper
Numbering shown is rear view
of male and face view of female.
D - specify code 85
in step 4 of ordering
information D - specify code 85 in
step 4 of ordering
information
Push-on fastener, phosphor bronze
Numbering shown is rear view
of male and face view of female.
0.170 [4.32]
0.156 [3.96]
0.156 [3.96]
0.028
[0.71]
0.028 [0.71]
Ø 1 place,
0.037 [0.94]
Across points
2 places
0.470 [11.94]
0.470 [11.94]
0.112 [2.84] Typ. 0.112 [2.84]
Typ.
0.170 [4.32]
Nominal
0.037 [0.94]
Across points
0.025 [0.64]
±0.008
0.250 [6.35]
Ø
0.028
[0.71] Ø
0.028 [0.71] Ø
Typical par t number:
CBD17W2M65S60T20
Typical par t number:
CBD17W2M85R7NT20 Typical par t number:
CBD36W4M85R7NT20
90° PRINTED BOARD MOUNT CONNECTOR WITH SHIELDED CONTACTS
CODE 85, CONNECTOR WITH FRT4201D OR MRT4201D CONTACTS
Note: Shell siz e 5 connectors are supplied inver ted when ordered with 90° printed board mount shielded contacts.
CBD**85**** 0.283 [7.19] CONTACT EXTENSION
SHELL SIZE A B C D
SHELL SIZE 1 1.204
[30.58] 0.984
[24.99] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 2 1.532
[38.91] 1.312
[33.32] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 3 2.072
[52.63] 1.852
[47.04] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 4 2.720
[69.09] 2.500
[63.50] 0.339
[8.61] 0.283
[7.19]
SHELL SIZE 5 2.626
[66.70] 2.406
[61.11] 0.395
[10.03] 0.545
[13.84]
Combo-D
Sub-D
15 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
STRAIGHT PRINTED BOARD MOUNT CONTACT HOLE PATTERN
WITH FDS4201D AND MDS4201D SHIELDED CONTACTS
Hole identification shown is for male connector, use mirror image for female connector.
0.218 [5.54] Typ.
0.270 [6.86] Typ.
0.570 [14.48] Typ.
0.108 [2.74] Typ.
0.108 [2.74] Typ. 0.108 [2.74] Typ. 0.109 [2.77] Typ.
0.109 [2.77] Typ. 0.109
[2.77] Typ.
0.109 [2.77] Typ. 0.109 [2.77] Typ.
0.109 [2.77] Typ.
0.109 [2.77] Typ.
0.109 [2.77] Typ.
0.109 [2.77] Typ.
0.250 [6.35] Typ.
0.054 [1.37] Typ. 0.054 [1.37] Typ.
0.162
[4.11] Typ.
0.216 [5.49] Typ.
0.270 [6.86] Typ. 0.108 [2.74] Typ.
0.054 [1.37] Typ.
0.162 [4.11] Typ.
0.162 [4.11]
0.268 [6.81] Typ.
0.272 [6.91] Typ.
0.218 [5.54] Typ.
0.275 [6.99] Typ.
0.216 [5.49]
0.492
[12.50] Typ.
0.926 [23.52] Typ. 0.926 [23.52] Typ.
0.926 [23.52] Typ.
0.893 [22.68] Typ.
0.900 [22.86] Typ. 0.265 [6.73] Typ.
0.055 [1.40] Typ.
0.270 [6.86] Typ.
0.270 [6.86]
0.540 [13.72]
0.540 [13.72]
0.055 [1.40] Typ.
0.055 [1.40] Typ.
0.055
[1.40] Typ.
0.055 [1.40] Typ.
0.120 [3.05] Typ.
0.060 [1.52] Typ.
0.055 [1.40] Typ. 0.055 [1.40] Typ.
1.250 [31.75] Typ.
1.250 [31.75] Typ.
1.203 [30.56] Typ.
0.109 [2.77] Typ.
1.203 [30.56] Typ.
0.109
[2.77] Typ.
1.203 [30.56] Typ.
0.650
[16.51] Typ.
0.900 [22.86] Typ.
1.203 [30.56] Typ.
0.893 [22.68] Typ.
1.250 [31.75] Typ.
1.250 [31.75] Typ.
1.250 [31.75] Typ.
1.250 [31.75] Typ.
0.656 [16.66] Typ.
0.656 [16.66] Typ. 0.656 [16.66] Typ.
0.200 [5.08]
0.200 [5.08]
0.200 [5.08]
0.200
[5.08]
0.200
[5.08]
0.200 [5.08]
0.200 [5.08]
0.200 [5.08] 0.200 [5.08]
0.200
[5.08] 0.200
[5.08]
0.200
[5.08] 0.200
[5.08] 0.200
[5.08]
0.100 [2.54]
0.100 [2.54]
0.100 [2.54]
0.100 [2.54]
0.100 [2.54]
0.100 [2.54] 0.100 [2.54] 0.100 [2.54] Typ.
0.100 [2.54]
0.100 [2.54]
0.100 [2.54]
0.034 [0.86]
0.306 [7.77]
0.163 [4.14]
0.570 [14.48] Typ. 0.544 [13.82] Typ.
0.926 [23.52] Typ. 0.926 [23.52] Typ.
0.306 [7.77]
0.100
[2.54]
0.570
[14.48] 0.100
[2.54]
0.100
[2.54]
0.100
[2.54]
0.100
[2.54] 0.100
[2.54]
0.112
[2.84] 0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.112
[2.84]
0.112 [2.84]
0.112 [2.84] 0.112 [2.84]
0.112 [2.84]
0.224 [5.69]
0.224
[5.69]
0.224 [5.69]
0.650 [16.51]
0.343 [8.71]
0.652 [16.56]
0.707 [17.96]
0.150 [3.81]
0.112 [2.84]
0.112 [2.84]
0.200 [5.08] 0.200 [5.08]
0.112 [2.84]
0.056 [1.42] 0.056 [1.42]
0.056 [1.42]
0.056 [1.42]
0.056 [1.42]
0.056 [1.42] 0.056 [1.42]
0.056
[1.42] 0.050
[1.27]
0.056
[1.42]
0.056 [1.42]
0.618 [15.70]
0.893 [22.68] Typ.
0.810 [20.57] Typ.
0.810 [20.57] 0.810 [20.57]
1.205 [31.75] Typ.
0.618 [15.70]
0.600 [15.24]
0.618 [15.70]
0.092 [2.34]
0.056 [1.42]
0.056 [1.42]
0.056 [1.42]
5W1
5W5 9W4
8W8
13W3
21W1
17W5
27W2
43W2 47W1 46W4
24W7 36W4
21WA4
17W2
13W6
25W3
3W3/3WK3 7W2 11W1
Typ.
Suggest 0.045 [1.14] Ø hole for signal contact termination position.
Suggest 0.123±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
Typ.
Combo-D
Sub-D
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
16
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
CBD/CBM SERIES
90° PRINTED BOARD MOUNT CONTACT HOLE PATTERN
WITH FRT4201D AND MRT4201D SHIELDED CONTACTS
Hole identification shown is for male connector, use mirror image for female connector.
Mount connector with mating face positioned to follow direction of arrow.
0.218 [5.54] Typ.
0.270 [6.86] Typ.
0.570 [14.48] Typ.
0.108 [2.74] Typ.
0.108 [2.74] Typ. 0.108
[2.74] Typ. 0.109 [2.77] Typ.
0.109 [2.77] Typ. 0.109 [2.77] Typ.
0.109 [2.77] Typ. 0.109 [2.77] Typ.
0.109 [2.77] Typ.
0.270
[6.86] Typ.
0.109 [2.77] Typ.
0.109 [2.77] Typ.
0.250 [6.35] Typ.
0.054 [1.37] Typ. 0.054 [1.37] Typ.
0.162 [4.11] Typ.
0.216 [5.49] Typ.
0.270 [6.86] Typ. 0.108 [2.74] Typ.
0.054 [1.37] Typ.
0.162 [4.11] Typ.
0.162 [4.11]
0.268 [6.81] Typ.
0.218 [5.54] Typ.
0.275 [6.99] Typ.
0.216 [5.49]
0.492
[12.50] Typ.
0.926 [23.52] Typ. 0.926 [23.52] Typ.
0.926 [23.52] Typ.
0.893 [22.68] Typ.
0.900 [22.86] Typ. 0.265 [6.73] Typ.
0.055 [1.40] Typ.
0.109
[2.77] Typ.
0.109 [2.77] Typ. 0.109 [2.77] Typ.
0.270 [6.86]
0.540 [13.72]
0.540 [13.72]
0.810 [20.57] Typ.
0.810 [20.57]
0.055 [1.40] Typ.
0.055 [1.40] Typ.
0.055 [1.40] Typ.
0.055 [1.40] Typ.
0.055 [1.40] Typ. 0.055 [1.40] Typ.
1.250 [31.75] Typ.
1.250 [31.75] Typ.
1.203 [30.56] Typ. 1.203 [30.56] Typ.
1.203 [30.56] Typ.
0.810 [20.57]
1.203 [30.56] Typ.
0.893
[22.68] Typ.
1.250 [31.75] Typ.
1.250 [31.75] Typ.
1.250 [31.75] Typ.
0.656 [16.66] Typ. 0.656 [16.66] Typ. 0.656 [16.66] Typ.
0.200 [5.08]
0.200 [5.08] 0.200 [5.08] 0.200 [5.08]
0.200 [5.08]
0.200 [5.08]
0.200 [5.08]
0.200 [5.08]
0.200 [5.08]
0.200 [5.08]
0.200 [5.08]
0.100 [2.54] 0.100 [2.54]
0.100
[2.54]
0.131 [3.33]
0.131 [3.33]
0.131 [3.33]
0.131 [3.33]
0.131 [3.33]
0.131 [3.33]
0.131
[3.33]
0.200 [5.08]
0.131 [3.33]
0.131 [3.33]
0.131 [3.33] 0.131 [3.33]
0.131 [3.33]
0.100 [2.54]
0.100 [2.54]
0.100 [2.54]
0.100 [2.54]
0.100
[2.54]
0.100 [2.54]
0.100 [2.54]
0.100 [2.54]
0.034 [0.86]
0.306 [7.77]
0.163 [4.14] Typ.
0.570 [14.48] Typ. 0.544 [13.82] Typ.
0.926 [23.52] Typ. 0.926 [23.52] Typ.
0.306 [7.77]
0.570 [14.48] Typ.
0.100 [2.54]
0.100 [2.54]
0.100
[2.54]
0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.112 [2.84]
0.112
[2.84] 0.374
[9.50]
0.075 [1.91]
0.112 [2.84]
0.374 [9.50]
0.200 [5.08] 0.075 [1.91]
0.200 [5.08]
0.100
[2.54]
0.650 [16.51]
0.343 [8.71]
0.652 [16.56]
0.707 [17.96]
0.150 [3.81]
0.112 [2.84]
0.112 [2.84]
0.200 [5.08]
0.112 [2.84]
0.056 [1.42] 0.056 [1.42]
0.056 [1.42]
0.056 [1.42]
0.056 [1.42]
0.056
[1.42] 0.075
[1.91]
0.150
[3.81] 0.150
[3.81]
0.056 [1.42]
0.618 [15.70] Typ. 0.893 [22.68] Typ.
0.112 [2.84]
0.112 [2.84] 0.112 [2.84]
0.112 [2.84]
1.250 [31.75] Typ.
0.618 [15.70]
0.600 [15.24]
0.618 [15.70]
0.092 [2.34]
0.056 [1.42]
0.056 [1.42]
0.056 [1.42]
5W1
5W5 9W4
8W8
13W3
21W1
17W5
27W2
43W2 47W1
24W7 36W4
21WA4
17W2
13W6
25W3
3W3/3WK3 7W2 11W1
Suggest 0.045 [1.14] Ø hole for signal contact termination positions.
Suggest 0.123±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
Note: Shell size 5 connectors are supplied inverted when ordered with
90° printed board mount shielded contacts.
0 – Connector ordered without size 8 power shielded or high volt-
age removable contacts. See pages 19, 20, 22 and 24 for con-
tact par t numbers. Available on 3W3, 3W3K, 5W5 and 8W8.
2 – Solder, Signal Contacts only.
3 – Solder, Straight Printed Board Mount with Signal Contacts,
0.170 [4.32] Tail Length.
35 – Solder, Straight Printed Board Mount with Signal and 0.078
[1.98] Ø Power Contacts, 0.170 [4.32] Tail Length.
36 – Solder, Straight Printed Board Mount with Signal and 0.094
[2.39] Ø Power Contacts, 0.170 [4.32] Tail Length.
37 – Solder, Straight Printed Board Mount with Signal and 0.125
[3.18] Ø Power Contacts, 0.170 [4.32] Tail Length.
5 – Solder, 90˚ Printed Board Mount with Signal Contacts only,
0.283 [7.19] Signal Contact Extension.
55 – Solder, 90˚ Printed Board Mount with Signal and 0.078 [1.98] Ø
Power Contacts, 0.283 [7.19] Signal Contact Extension.
57 – Solder, 90˚ Printed Board Mount with Signal and 0.125 [3.18] Ø
Power Contacts, 0.283 [7.19] Signal Contact Extension.
65 – Solder, Straight Printed Board Mount with Signal and Shielded
Contacts MDS/FDS 4201D footprint, 0.170 [4.32] Signal Contact
Tail Length.
7 – Solder, Metric System 90˚ Printed Board Mount with Signal
Contacts only, 0.370 [9.40] Signal Contact Extension.
75 – Solder, Metric System 90˚ Printed Board Mount with Signal and
0.078 [1.98] Ø Power Contacts, 0.370 [9.40] Signal Contact
Extension.
77 – Solder, Metric System 90˚ Printed Board Mount with Signal and
0.125 [3.18] Ø Power Contacts, 0.370 [9.40] Signal Contact
Extension.
***85 – Solder, 90˚ Pr inted Board Mount with Signal and Shielded
Contacts MRT/FRT 4201D footprint, 0.283 [7.19] Signal
Contact Extension.
93 – Size 20 Omega type compliant and Size 8 Bi-Spring type
compliant, termination length 0.225 [5.72]
Combo-D
Sub-D
17 DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic Industries, Inc.
www.connectpositronic.com
INDUSTRIAL AND MILITARY QUALITY
SUBMINIATURE-D CONNECTORS
FOR MILITARY AND SHELTERED
INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
CBD/CBM SERIES
ORDERING INFORMATION – CODE NUMBERING SYSTEM
Specify Complete Connector By Following Steps 1 Through 9
Insert “0”When Step Is Not Used
STEP 2 - Combo-D Series Connector Variants
STEP 4 - Type of Contacts
STEP 8 - Shell Options
0–Zinc Plated with Dichromate Seal
S–Stainless Steel
X–Tin Plated
Z–Tin Plated and Dimpled-male connector only
**STEP 9 - Special Options
759.0 – Blind Mate Pilot
759.1 – Blind Mate Panel
-14 – Signal contacts plated 0.000030
[0.75µ] gold over nickel.
1 2 3 4 5 6
CBD 17W2 F55 R7 NT2
7
X
8
STEP 9
STEP 1 - Basic Series
CBD – Industrial Quality with Open Entr y
Signal Contacts
CBM – Military Conformance with “Closed
Entry” Signal Contacts plated 0.000050
[1.27µ] gold over nickel plate
STEP 3 - Connector Gender
M – Male
F– Female
*STEP 7 - Locking and Polarizing Systems
0–None.
V3 – Lock Tab, connector front panel mounted.
V5 – Lock Tab, connector rear panel mounted.
VL – Lock Lever, used with Hoods only.
T–Fixed Female Jackscrews.
T2 – Fixed Female Jackscrews.
T6 – Fixed Male and Female Polar ized Jackscrews.
E–Rotating Male Jackscrews.
E2 – Rotating Male Screw Locks.
E6 – Rotating Male and Female Polar ized Jackscrews.
Shell Size 1
5W1
Shell Size 2
3W3, 3WK3, 7W2, 11W1
Shell Size 3
5W5, 9W4, 13W3, 17W2, 21W1
Shell Size 4
8W8, 13W6, 17W5, 21WA4, 25W3, 27W2
Shell Size 5
24W7, 36W4, 43W2, 47W1
Shell Size 6
46W4
*STEP 6 - Hoods and Push-On Fasteners
0–None
Z–Hood, Top or Side Opening, robust extended height,
plastic and composite, with rotating male jackscrews,
shell sizes 1 through 5
H–Hood, Top Opening, Metal, shell sizes 2 through 5
**G – Hood, EMI/RFI, Metal, shell sizes 1 through 6
N–Push-on Fastener, for 90˚ Mounting Brackets
*STEP 5 - Mounting Style
0–Mounting Hole, 0.120 [3.05] Ø
02 – Mounting Hole, 0.154 [3.91] Ø
B3 – Bracket, Mounting, 90˚ Metal with Cross Bar
B8 – Bracket, Mounting, 90° Plastic with Cross Bar
F–Float Mounts, Universal
P–Threaded Post, Brass, 0.250 [6.35] Length
P2 – Threaded Post, Nylon, 0.250 [6.35] Length
R2 – Bracket, Mounting, 90˚ Metal, Swaged to Connector with 4-40
Thread Fixed Female Jackscrews with Cross Bar
R6 – Bracket, Mounting, 90˚ Metal, Swaged to Connector with
0.120 [3.05] Ø Mounting Hole with Cross Bar
R7 – Bracket, Mounting, 90˚ Metal, Swaged to Connector with 4-40
Threads with Cross Bar
R8 – Bracket, Mounting, 90˚ Metal, Swaged to Connector with 4-40
Locknut with Cross Bar
S–Swaged Spacer, 4-40 Threads, 0.250 [6.35] Length, Spacer
length changes to .0265 [6.73] when used in conjunction with
Code 93 contacts
S2 – Swaged Spacer, 4-40 Threads, 0.125 [3.18] Length
S5 – Swaged Locknut, 4-40 Threads
S6 – Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.250
[6.35] Length
*For additional information on accessories listed in steps 5, 6, 7 & 9,
see Accessory Catalog.
**When using G hood with CBD variants, use the extended height hood.
See Accessories Catalog for extended G hood options.
***Not available on shell size 6, CBD 46W4.
