VOM618A www.vishay.com Vishay Semiconductors Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package FEATURES * Operating temperature from - 55 C to + 110 C * SOP-4 mini-flat package A 1 4 C C 2 3 E * CTR range 40 % to 600 %, IF = 1 mA * Isolation test voltage, 3750 VRMS * Low saturation voltage * Fast switching times * Low coupling capacitance i179089 * End-stackable, 0.100" (2.54 mm) spacing * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION APPLICATIONS The 110 C rated VOM618A has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4 pin 100 mil lead pitch miniflat package. It features a high current transfer ratio with low input current, low coupling capacitance, and high isolation voltage. * PLCs * Telecommunication * Lighting control system * Solar inverters * AC drives These coupling devices are designed for signal transmission between two electrically separated circuits. AGENCY APPROVALS (All parts are certified under base model VOM618A) * UL1577, file no. E52744 * cUL tested to CSA 22.2 bulletin 5A * DIN EN 60747-5-5 (VDE 0884-5), available with option 1 * FIMKO EN 60065 and EN 60950-1 * CQC: GB8898-2011, GB4943.1-2011 ORDERING INFORMATION V O M 6 1 8 A - PART NUMBER SOP-4, mini-flat VDE, UL, cUL, CQC, FIMKO SOP-4, mini-flat X CTR BIN AGENCY CERTIFIED/ PACKAGE UL, cUL, FIMKO, CQC # 0 0 1 VDE OPTION T SOP-4 TAPE AND REEL 5 CTR (%) 1 mA 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 50 to 100 250 to 500 80 to 160 130 to 260 200 to 400 VOM618AT VOM618A-1T VOM618A-2T VOM618A-3T VOM618A-4T VOM618A-5T VOM618A-6T VOM618A-7T VOM618A-8T VOM618A-9T 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 50 to 100 250 to 500 80 to 160 130 to 260 200 to 400 VOM618AX001T VOM618A1X001T VOM618A2X001T VOM618A3X001T VOM618A4X001T VOM618A5X001T VOM618A6X001T VOM618A7X001T VOM618A8X001T VOM618A9X001T Document Number: 83449 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 10-Dec-12 VOM618A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT DC forward current IF 60 mA Reverse voltage VR 6 V Pdiss 70 mW IFSM 2.5 A Collector emitter voltage VCEO 80 V Emitter collector voltage VECO 7 V IC 50 mA INPUT Power dissipation tp 10 s Surge forward current OUTPUT Collector current tp 1 ms Power dissipation IC 100 mA Pdiss 150 mW VISO 3750 VRMS COUPLER Isolation test voltage between emitter and detector t = 1 min Total power dissipation Ptot 170 mW Operating temperature range Tamb - 55 to + 110 C Storage temperature range Tstg - 55 to + 150 C Tj 125 C Tsld 260 C Junction temperature Soldering temperature (1) Ptot - Total Power Dissipation (mW) Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) See "Assembly Instructions" for surface mounted devices (www.vishay.com/doc?80054). 200 Coupled device 150 100 Phototransistor IR-diode 50 0 0 25 50 75 100 125 Tamb - Ambient Temperature (C) Fig. 1 - Total Power Dissipation vs. Ambient Temperature Document Number: 83449 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 10-Dec-12 VOM618A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 5 mA Reverse current VR = 6 V MIN. TYP. MAX. UNIT VF 1.1 1.6 V IR 0.01 10 A VR = 0 V, f = 1 MHz Cj 9 Collector emitter leakage current VCE = 20 V ICEO 0.4 Collector emitter breakdown voltage IC = 100 A BVCEO 80 V Emitter collector breakdown voltage IE = 10 A BVECO 7 V Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE 2.8 pF f = 1 MHz CC 0.3 pF IF = 1 mA, IC = 0.25 mA VCEsat 0.12 IF = 10 mA, VCC = 5 V, RL = 100 fctr 110 INPUT Capacitance pF OUTPUT 100 nA COUPLER Coupling capacitance Collector emitter saturation voltage Cut-off frequency 0.4 V kHz Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER IC/IF TEST CONDITION IF = 1 mA, VCE = 5 V PART SYMBOL MIN. MAX. UNIT VOM618A CTR 50 TYP. 600 % VOM618A-1 CTR 40 80 % VOM618A-2 CTR 63 125 % VOM618A-3 CTR 100 200 % VOM618A-4 CTR 160 320 % VOM618A-5 CTR 50 100 % VOM618A-6 CTR 250 500 % VOM618A-7 CTR 80 160 % VOM618A-8 CTR 130 260 % VOM618A-9 CTR 200 400 % SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Rise and fall time Fall time Turn-on time IC = 2 mA, VCC = 5 V, RL = 100 Turn-off time tr 5 s tf 4 s ton 7 s toff 6 s tr 6 s s SATURATED Rise and fall time Fall time Turn-on time Turn-off time IF = 1.6 mA, VCC = 5 V, RL = 4.7 k tf 29 ton 8 s toff 35 s Document Number: 83449 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 10-Dec-12 VOM618A www.vishay.com Vishay Semiconductors VCC = 5 V Input Input pulse RL 10 % VOUT Output pulse 90 % tr tf t off t on Fig. 2 - Test Circuit Fig. 3 - Test Circuit and Waveforms SAFETY AND INSULATION RATINGS PARAMETER SYMBOL VALUE UNIT Output safety power PSO 300 mW Input safety current Isi 200 mW Safety temperature TS 150 C Comparative tracking index CTI 175 MAXIMUM SAFETY RATINGS INSULATION RATED PARAMETERS Maximum withstanding isolation voltage VISO 3750 VRMS Maximum transient isolation voltage VIOTM 6000 Vpeak Maximum repetitive peak isolation voltage VIORM 565 Vpeak Insulation resistance Tamb = 25 C, VDC = 500 V RIO 1012 Isolation resistance Tamb = 100 C, VDC = 500 V RIO 1011 Climatic classification (according to IEC 68 part 1) 55/110/21 Environment (pollution degree in accordance to DIN VDE 0109) 2 Internal creepage 5 mm External creepage 5 mm Clearance 5 mm 0.4 mm Insulation thickness Note * As per DIN EN 60747-5-5 (VDE 0884), 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 10 Tamb = 110 C Tamb = 75 C Tamb = 25 C Tamb = 0 C Tamb = - 55 C IC - Collector Current (mA) IF - Forward Current (mA) 100 1 0.1 IF = 25 mA 50 IF = 20 mA 40 IF = 15 mA 30 IF = 10 mA 20 10 IF = 5 mA IF = 1 mA 0 0.6 0.8 1.0 1.2 1.4 1.6 VF - Forward Voltage (V) Fig. 4 - Forward Voltage vs. Forward Current 0 1 2 3 4 5 6 7 8 9 10 VCE - Collector Emitter Voltage (non-sat) (V) Fig. 5 - Collector Current vs. Collector Emitter Voltage (non-saturated) Document Number: 83449 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 10-Dec-12 VOM618A www.vishay.com Vishay Semiconductors 10 000 1.4 NCTR - Normalized CTR (sat) ICE0 - Leakage Current (nA) IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 1.2 1.0 0.8 0.6 0.4 0.2 0 - 60 - 40 - 20 0 20 40 60 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 C - 60 - 40 - 20 0 80 100 120 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 6 - Collector Emitter Current vs. Ambient Temperature Fig. 9 - Normalized Current Transfer Ratio vs. Ambient Temperature (saturated) IC - Collector Current (mA) 35 IF = 25 mA 30 25 20 IF = 1 mA IF = 10 mA IF = 0.5 mA IF = 5 mA 15 10 5 IF = 2 mA 0 0.0 0.1 0.2 0.3 0.4 NCTR - Normalized CTR (non-saturated) Tamb - Ambient Temperature (C) 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 C - 60 - 40 - 20 0 20 40 60 80 100 120 VCE - Collector Emitter Voltage (V) Tamb - Ambient Temperature (C) Fig. 7 - Collector Current vs. Collector Emitter Voltage (saturated) Fig. 10 - Normalized Current Transfer Ratio vs. Ambient Temperature (non-saturated) 2.0 IF = 1 mA 0.10 0.08 0.06 0.04 0.02 NCTR - Normalized CTR (sat) VCEsat - Collector Emitter Voltage (V) 0.12 Tamb = 0 C 1.8 1.6 Tamb = - 55 C 1.4 1.2 1.0 0.8 0.6 Tamb = 25 C 0.4 0.2 Tamb = 110 C 0.0 0.00 - 60 - 40 - 20 0 20 40 60 80 100 120 0.1 1 10 100 Tamb - Ambient Temperature (C) IF - Forward Current (mA) Fig. 8 - Collector Emitter Voltage vs. Ambient Temperature (saturated) Fig. 11 - Current Transfer Ratio vs. Forward Current (saturated) normalized to 1 mA at 25 C Document Number: 83449 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 10-Dec-12 VOM618A www.vishay.com Vishay Semiconductors 1000 Tamb = 0 C ton, toff - Switching Time (s) NCTR - Normalized CTR (NS) 2.5 Tamb = - 55 C 2.0 1.5 Tamb = 25 C 1.0 Tamb = 110 C 0.5 0.0 VCE = 5 V IF = 1 mA toff (s) 100 ton (s) 10 1 0.1 1 10 100 0 5 10 15 20 IF - Forward Current (mA) RL - Load Resistance (k) Fig. 12 - Current Transfer Ratio vs. Forward Current (non-saturated) normalized to 1 mA at 25 C Fig. 15 - Switching Time vs. Load Resistance 0 VCE = 5 V, Tamb = 25 C RL = 100 -5 - 10 Voltage Gain fCTR - Cut-off-Frequency (kHz) 1000 100 10 - 15 - 20 RL = 1000 - 25 - 30 - 35 VCE = 5 V - 40 1 0.1 1 10 100 1 10 100 1000 IC - Collector Current (mA) f - Cut-off Frequency (kHz) Fig. 13 - Cut-off Frequency (- 3 dB) vs. Collector Current Fig. 16 - Voltage Gain vs. Cut-off Frequency 0 VCE = 5 V - 20 RL = 100 Phase Angle (deg) - 40 - 60 - 80 - 100 RL = 1000 - 120 - 140 - 160 1 10 100 1000 f - Cut-off Frequency (kHz) Fig. 14 - FCTR vs. Phase Angle Document Number: 83449 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 10-Dec-12 VOM618A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 2.54 0.25 4 3 2 6.5 0.10 0.1 2.00 0.2 3.85 0.3 5.30 0.3 0.40 0.1 7.00 0.2 0.05 1 2.54 Pin one ID 0.8 4.40 0.2 1 + 0.2 - 0.7 i178048 PACKAGE MARKING (example of VOM618A-3X001T) 618A3 V YWW 25X Notes * Only option 1 is reflected in the package marking with the character "X". * Tape and reel suffix (T) is not part of the package marking. TAPE AND REEL DIMENSIONS in millimeters 17.1 1.5 0.1 2 0.1 4 0.1 1.75 0.1 5.5 0.1 12 0.3 100 330 (13") 8 0.1 0.3 0.05 2.45 0.1 Fig. 17 - Reel Dimensions (3000 units per reel) Fig. 18 - Tape Dimensions Document Number: 83449 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.3, 10-Dec-12 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000