1 4 3 This document Is the property of Amphenol Corporation and Is dellvered on the express condition that It Is not to be disclosed, reproduced or used, In REVISIONS whole or in part, for manufacture or sale by anyone other than Amphenol Corporation without its prior concert, & that no right is granted to disclose or to use any Information In this document. SYM ECN DESCRIPTION DATE APPROVED A4 HKXXXX Release to customer 3/1 0/06 IP OF DATUM B NOTES: {MATERIAL HOUSING: PPA FR-6145 45% GLASS FILLED UL94V-0, BLACK. OR EQUIVALENT HIGH TEMPERATURE PLASTIC. CONTACT: COPPER ALLOY PLATING: 2.ELECTRICAL SPECIFICATION: REFER TO P/N SYSTEM ON MATING AREA 1.27~2.54um NICKEL UNDERPLATE OVERALL 2.54~5.08um PURE TIN ON SOLDER TAIL CURRENT RATING: CONTACT RESISTANCE: 30m MAX. INSULATOR RESISTANCE: DIELECTRIC WITHSTANDING VOLTAGE: 500 V AC 1.5A 3. RECOMMANDED PCB THICKNESS 0.056~0.068 INCH 4. ORDER P/N SYSTEM: SAS-M310-003-X 0.60+0.10(2x) -70(4X) {7.78} a uw st MILA : 2.35 | | | | | 4.90+0.08 o.s6Min- + + + Tre TF 0.B4+0.05(22X)-| Sd bfierexy] 8" Pt [elots[B] Fara + Pe | 15.875 {15.875} 33.43+0.05 42.73 41.13+0.15 [10.20] B] (ex) 4.85+0.05 [E] -2.05+0.05 0.30+0.05(2x)H [0.10 |B 0.07 B _j|--0,4040.05x45(3X) C-- ro.s0+0.08(4x) _ | [0.07] ] C TI mS 7] i iN ep fp oo 1 ZS J ] - 4 WT al T Reo eee = = nH ) vou yoa 4.00+0.08- 0.3040.05(4X) 2.250.065 |, __| 1.10 [@[0.15[D| C- i 0.30+0.05X45*(5X) B se si4 OF DATUM D 6.10 37.19 0.45+0.03(7X)-} 7.62 5.92+4 0.520.06X45"~| P4654 2.00(3X) po bet telat Pa pi 5.030.065 TTL L, 7x0.30+0.05-l + _.| |_{0.80(6x)] 22X0.45+0.05+/ | [@ [0.20] 0.20[B] 35.13 55.77+0.15 0.15|B] -15.50+0.10+ [@]0.15|D] L_ MATING 1- 0.76um MIN Au. 2- 0.38um MIN Au. A- Gold FLASH 18X8-9050.19~) 1000MQ MIN. AREA PLATING posses rw G 1.2340.05 INXY 4 a0020081 Sy 14X4.40+0.15 CONTACT SURFACE FLUSH TO DATUM A +0.03 SECTION A-A SCALE 4:1 ITEM PART NO. REQD DESCRIPTION PARTS LIST ee TOLERANCES APPROVAL DATE U.S. METRIC | DRAWN RAN.XIAO | 3/10/06 A mM h eno | xX 4/- 0.20 CHECKED IP 3/10/06 Pp XX +/- / 0.10 CHECKED XXX +/- 0.05 FRACTIONS +/ / TITLE ANGLES +/- 2 DRAWING FILE : FOR MATERIALS AND FINISHES SEE NOTES \DRAWING\ SAS\ CSASM310-003-X REMOVE SHARP EDGES ANGLE OF PROJECTION SAS STRAIGHT SMT PLUG . Ly S T O C 4 ) 4 OC VW ) DIMENSIONS SIZE | DRAWING NO. REV, us | wenes ee A3} C SASM310003-X) A4 (METRIC) (MM) SCALE | NONE | SHEET 1 OF 2 t 2 | 14 This document Is the property of Amphenol Corporation and Is dellvered on the express condition that It Is not to be disclosed, reproduced or used, In whole or in part, for manufacture or sale by anyone other than Amphenol Corporation without its prior concert, & that no right is granted to disclose or to use any Information In this document. 7m RO.50(4X) eG i= fi | Os Tire oR SS qr Li $2.60+0.05(2X) a) [@|0.20|c[B|D] []0.20|c|BID| REAR VIEW +6X30 |--6X0.30:40.05 (0-82) ase \ 2X1.90+0.08 VL 0.68 | 2.40+0.08 D 0.10[A| | SECTION B-B Customer D $2.60+0.05(2X) 2 1 REVISIONS SYM ECN DESCRIPTION DATE APPROVED Refer to sheet 1 61.3019-05 {17.78} 0.50+.05('7X) " 2.10810 1.075029 2.154910 2.1079-10 \ lt_a 7 \ \ P YY ft hS1 + 0.908.065 3.00 RECOMMENDED PCB LAYOUT PCB THICKNESS FROM 0.056~0.068 INCH RO.50 a / 1.53 powers I 7 1.45 Z Ft 44 Phezzeda 3X0.85MAX % U L [0.1] RO.30+0.08 1.95+0.084 0.051923 t- 29 SOLDER TAILS SECTION C-C SCALE 2:1 UNLESS OTHERWISE SPECIFIED APPROVAL DATE TOLERANCES Ss. DRAWN RAN.XIAO 3/10/06 xX 4/- ns e CHECKED IP 3/10/06 A mM p h eno | XX +/- / 0.10 CHECKED (XXX +/- 0.05 FRACTIONS +/ / TITLE ANGLES +/- 2 DRAWING FILE : FOR MATERIALS AND FINISHES SEE NOTES \DRAWING\ SAS\ CSASM3 1 0-003-X REMOVE SHARP EDGES DIMENSIONS u.s_ INGHES (METRIC) (MM) ANGLE OF PROJECTION SAS STRAIGHT SMT PLUG SIZE AS DRAWING NO. C SASM3810003-X REV. A4 SCALE | NONE | SHEET 2 OF 2 1