3.2mm x 2.5mm Ceramic SMD Crystal C3BS (former FX325BS) DATASHEET * C3BS STANDARD SPECIFICATIONS MAX(unless otherwise noted) 8.000 ~ 200.000 MHz PARAMETERS Frequency Range Frequency Tolerance @ 25C Frequency Stability, ref @ 25C (See options on page 2) (See options below) Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (Co) (CL) Load Capacitance Drive Level Aging per year Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Seal Method Lead (Pb) Free RoHS Compliant Frequency Range (See options below) -55C ~ +125C 3.0 pF (See options on page 2) 0.1 mW 5 PPM 260C / 10 Seconds 1 Au over Ni Seam Yes Yes (MHz) Operating Mode Max ESR 8.000 ~ 9.999999 10.000 ~ 11.999999 12.000 ~ 15.999999 16.000 ~ 19.999999 20.000 ~ 24.999999 25.000 ~ 53.999999 54.000 ~ 200.000 60.000 ~ 99.999999 100.000 ~ 124.999999 125.000 ~ 150.000 Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental Fundamental 3rd OT 3rd OT 3rd OT 500 150 80 60 50 40 30 150 100 80 Pin Connections 1 - Crystal 2 - Lid/Gnd 4 - Lid/Gnd 3 - Crystal Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. Available Operating Temperatures and Stabilities* Operating Temperature 5 PPM 10 PPM 15 PPM 20 PPM 25 PPM X 0 ~ +70C O O O O -10 ~ +60C O O O -10 ~ +70C X O O O -20 ~ +70C X O O O X X -30 ~ +85C O O X X -40 ~ +85C O O X X -40 ~ +105C X X X X -40 ~ +125C X X X X -55 ~ +125C X X Key: O=Available, X=Not Available, N/A=Not applicable *Does not imply a stocked part. (c) Copyright 2019 Fox Electronics, All rights reserved O O O O O O X X X 30 PPM 50 PPM 100 PPM O O O O O O X X X O O O O O O O O O N/A N/A N/A N/A N/A N/A O O O Title / Description: C3BS SERIES STANDARD SPECIFICATIONS Drawing Number: 101138 Size: A Part Number: Cage: 61429 Draftsperson: MAJ Approved: BEC Revision Date: 06/4/2019 Page 1 of 2 C3BS 3.2mm x 2.5mm Ceramic SMD Crystal (former FX325BS) DATASHEET * TAPE SPECIFICATIONS (mm) B A O1.55 4.0 C D 4.0 3.5 E 8.0 * REEL SPECIFICATIONS (mm) F Reel QTY G H 1.3 -T3 = 3,000 default -T2 = 2,000 -T1 = 1,000 2.0 O13 I J K L M O21 O80 O180 9.0 2.0 1.75 Available Options & Part Identification for Crystal Model C3BS1 F C3BS B B G M 25.0 F C3BS B B G M 25.0 FOX Model Number Tolerance Stability Load Capacitance2 Operating Temperature Frequency (MHz) B = 50 PPM C = 30 PPM D = 25 PPM E = 20 PPM F = 15 PPM H = 10 PPM A = 100 PPM B = 50 PPM C = 30 PPM D = 25 PPM E = 20 PPM F = 15 PPM H = 10 PPM L = 5 PPM V = 7 pF D = 8 pF W = 9 pF E = 10 pF G = 12 pF J = 15 pF K = 16 pF L = 18 pF M = 20 pF C = 0 to +70C D = -10 to +60C E = -10 to +70C F = -20 to +70C K = -30 to +85C M = -40 to +85C P = -40 to +105C I = -40 to +125C T = -55 to +125C 1Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 2Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact Fox Technical Support for assistance. Corporate Headquarters 5570 Enterprise Parkway Fort Myers, FL 33905 http://www.FOXONLINE.com Sales 1-888-GET-2-FOX (1-888-438-2369) or 1-239-693-0099 http://www.FOXONLINE.com/repdisty Tech Support http://www.FOXONLINE.com/email PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics. Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners. For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html. (c) Copyright 2019 Fox Electronics, All rights reserved Title / Description: C3BS SERIES STANDARD SPECIFICATIONS Drawing Number: 101138 Size: A Part Number: Cage: 61429 Draftsperson: MAJ Approved: BEC Revision Date: 06/4/2019 Page 2 of 2