3.2mm x 2.5mm Ceramic SMD Crystal C3BS
(former FX325BS)
DATASHEET
© Cop
y
ri
g
ht 2019 Fox Electronics, All ri
g
hts reserved
Title / Description: C3BS SERIES STANDARD SPECIFICATIONS
Drawing Number: 101138 Size: A
Part Number: Cage: 61429
Draftsperson: MAJ Approved: BEC Revision Date: 06/4/2019
Page 1 of 2
•
C3BS STANDARD SPECIFICATIONS
PARAMETERS MAX(unless otherwise noted)
Frequency Range 8.000 ~ 200.000 MHz
Frequency Tolerance @ 25ºC (See options on page 2)
Frequency Stability, ref @ 25ºC (See options below)
Temperature Range
Operating
Storage
(TOPR)
(TSTG)
(See options below)
-55ºC ~ +125ºC
Shunt Capacitance (Co) 3.0 pF
Load Capacitance (CL) (See options on page 2)
Drive Level 0.1 mW
Aging per year ±5 PPM
Maximum Soldering Temp / Time 260ºC / 10 Seconds
Moisture Sensitivity Level (MSL) 1
Termination Finish Au over Ni
Seal Method Seam
Lead (Pb) Free Yes
RoHS Compliant Yes
Note: Dimensional drawing is for reference to critical specifications
defined by size measurements. Certain non-critical visual attributes,
such as side castellations, etc. may vary.
Available Operatin
g
Temperatures and Stabilities*
Operating Temperature
±5 PPM ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM ±50 PPM ±100 PPM
0 ~ +70ºC X O O O O O O N/A
-10 ~ +60ºC O O O O O O O N/A
-10 ~ +70ºC X O O O O O O N/A
-20 ~ +70ºC X O O O O O O N/A
-30 ~ +85ºC X X OOOO O N/A
-40 ~ +85ºC X X O O O O O N/A
-40 ~ +105ºC X X XXXX O O
-40 ~ +125ºC X X XXXX O O
-55 ~ +125ºC X X XXXX O O
Key: O=Available, X=Not Available, N/A=Not applicable *Does not imply a stocked part.
Frequency Range
(MHz)
Operating
Mode
Max ESR
8.000 ~ 9.999999 Fundamental 500
10.000 ~ 11.999999 Fundamental 150
12.000 ~ 15.999999 Fundamental 80
16.000 ~ 19.999999 Fundamental 60
20.000 ~ 24.999999 Fundamental 50
25.000 ~ 53.999999 Fundamental 40
54.000 ~ 200.000 Fundamental 30
60.000 ~ 99.999999 3rd OT 150
100.000 ~ 124.999999 3rd OT 100
125.000 ~ 150.000 3rd OT 80
Pin Connections
1 - Crystal 2
–
Lid/Gnd
3
–
Crystal 4
–
Lid/Gnd
3.2mm x 2.5mm Ceramic SMD Crystal C3BS
(former FX325BS)
DATASHEET
© Cop
y
ri
g
ht 2019 Fox Electronics, All ri
g
hts reserved
Title / Description: C3BS SERIES STANDARD SPECIFICATIONS
Drawing Number: 101138 Size: A
Part Number: Cage: 61429
Draftsperson: MAJ Approved: BEC Revision Date: 06/4/2019
Page 2 of 2
• TAPE SPECIFICATIONS (mm) • REEL SPECIFICATIONS (mm)
A B C D E F Reel QTY G H I J K L M
Ø1.55 4.0 4.0 3.5 8.0 1.3
-T3 = 3,000 default
-T2 = 2,000
-T1 = 1,000 2.0 Ø13 Ø21 Ø80 Ø180 9.0 2.0
1.75
Available
O
ptions
&
Part
I
dentification for Crystal Model C3BS
1
F C3BS B B G M 25.0
F C3BS B B G M 25.0
FOX Model Number Tolerance Stability
Load
Capacitance2
Operating
Temperature
Frequency
(MHz)
B = ±50 PPM
C = ±30 PPM
D = ±25 PPM
E = ±20 PPM
F = ±15 PPM
H = ±10 PPM
A = ±100 PPM
B = ±50 PPM
C = ±30 PPM
D = ±25 PPM
E = ±20 PPM
F = ±15 PPM
H = ±10 PPM
L = ±5 PPM
V = 7 pF
D = 8 pF
W = 9 pF
E = 10 pF
G = 12 pF
J = 15 pF
K = 16 pF
L = 18 pF
M = 20 pF
C = 0 to +70ºC
D = -10 to +60ºC
E = -10 to +70ºC
F = -20 to +70ºC
K = -30 to +85ºC
M = -40 to +85°C
P = -40 to +105ºC
I = -40 to +125ºC
T = -55 to +125ºC
1Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.
2Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact Fox Technical Support for assistance.
Corporate
Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
http://www.FOXONLINE.com
Sales
1-888-GET-2-FOX (1-888-438-2369) or
1-239-693-0099
http://www.FOXONLINE.com/repdisty
Tech Support
http://www.FOXONLINE.com/email
PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion.
All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the
operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer
products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of
others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the
failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics
product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and
service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners.
For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html.
