Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 13 SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE) SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE) REFLOW PARTS NUMBER N R 4 0 1 8 1 0 0 M Packaging Code T Series name Coating resin specification DimensionsLxWxH Code 2010 2012 2410 2412 3010 3012 4010 4012 4018 5010 5012 5014 5020 5024 5030 5040 6010 6012 6014 6020 6028 6.0x6.0x4.5 8030 8040 8.0x8.0x3.0 8.0x8.0x4.0 Packaging Taping Nominal inductance Code example 2R2 100 101 RDecimal point DimensionsLxWxHmm 2.0x2.0x1.0 2.0x2.0x1.2 2.4x2.4x1.0 2.4x2.4x1.2 3.0x3.0x1.0 3.0x3.0x1.2 4.0x4.0x1.0 4.0x4.0x1.2 4.0x4.0x1.8 4.9x4.9x1.0 4.9x4.9x1.2 4.9x4.9x1.4 4.9x4.9x2.0 4.9x4.9x2.4 4.9x4.9x3.0 4.9x4.9x4.0 6.0x6.0x1.0 6.0x6.0x1.2 6.0x6.0x1.4 6.0x6.0x2.0 6.0x6.0x2.8 6045 Blank space Inductance tolerance Code M N Nominal inductanceH 2.2 10 100 Inductance tolerance 20 30 Internal code POWER INDUCTORS INDUCTORS Series name Code NR NRH NRS NRV T STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY Type NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 NRH3010 L W H e f 2.00.1 (0.0790.004) 2.00.1 (0.0790.004) 2.40.1 (0.0950.004) 2.40.1 (0.0950.004) 3.00.1 0.1180.004 2.00.1 (0.0790.004) 2.00.1 (0.0790.004) 2.40.1 (0.0950.004) 2.40.1 (0.0950.004) 3.00.1 0.1180.004 1.0 max 0.039 max 1.2 max 0.047 max 1.0 max 0.039 max 1.2 max 0.047 max 1.0 max 0.039 max 0.50.2 0.0200.008 0.50.2 0.0200.008 0.60.2 0.0240.008 0.60.2 0.0240.008 0.90.2 0.0350.008 1.250.2 0.0500.008 1.250.2 0.0500.008 1.450.2 0.0570.008 1.450.2 0.0570.008 1.90.2 0.0750.008 Standard quantity [pcs] Taping 2500 2500 2500 2500 2000 This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 13 35 NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 NRS8030 NR 8040 NRS8040 POWER INDUCTORS INDUCTORS 3.00.1 0.1180.004 3.00.1 0.1180.004 1.2 max 0.047 max 0.90.2 0.0350.008 1.90.2 0.0750.008 3.00.1 0.1180.004 4.00.2 0.1570.008 4.00.2 0.1570.008 4.00.2 0.1570.008 8.00.2 0.3150.008 3.00.1 0.1180.004 4.00.2 0.1570.008 4.00.2 0.1570.008 4.00.2 0.1570.008 8.00.2 0.3150.008 0.90.2 0.0350.008 1.10.2 0.0430.008 1.10.2 0.0430.008 1.10.2 0.0430.008 1.600.3 0.0630.012 1.90.2 0.0750.008 2.50.2 0.0980.008 2.50.2 0.0980.008 2.50.2 0.0980.008 5.60.3 0.220.012 8.00.2 0.3150.008 8.00.2 0.3150.008 1.5 max 0.059 max 1.0 max 0.039 max 1.2 max 0.047 max 1.8 max 0.071 max 3.0 max 0.118 max *1 4.2 max 0.165 max *2 4.0 max 0.157 max 1.600.3 0.0630.012 5.60.3 0.220.012 2000 2000 5000 4500 3500 1000 1000 Unitmminch *1 0R96R8 type *2 100101type Type NRS5010 NRS5012 NRS5014 NRS5020 NRS5024 NRS5030 NR 5040 NRS5040 NRS6010 NR 6012 NRS6012 NRS6014 NR 6020 NRS6020 NR 6028 NRS6028 NR 6045 NRS6045 L W 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 4.90.2 0.1930.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 6.00.2 0.2360.008 H 1.0 max 0.039 max 1.2 max 0.047 max 1.4 max 0.055 max 2.0 max 0.079 max 2.4 max 0.094 max 3.0 max 0.118 max *3 4.1 max 0.161 max *4 4.0 max 0.157 max 1.0 max 0.039 max 1.2 max 0.047 max 1.4 max 0.055 max 2.0 max 0.079 max 2.8 max 0.110 max 4.5 max 0.177 max e f l 1.20.2 0.0470.008 1.20.2 0.0470.008 1.20.2 0.0470.008 1.20.2 0.0470.008 1.20.2 0.0470.008 1.20.2 0.0470.008 3.30.2 0.1300.008 3.30.2 0.1300.008 3.30.2 0.1300.008 3.30.2 0.1300.008 3.30.2 0.1300.008 3.30.2 0.1300.008 1.3typ 0.051typ 1.3typ 0.051typ 1.3typ 0.051typ 1.3typ 0.051typ 1.3typ 0.051typ 1.3typ 0.051typ 1.20.2 0.0470.008 3.30.2 0.1300.008 1.3typ 0.051typ 1.350.2 0.0530.008 1.350.2 0.0530.008 1.350.2 0.0530.008 1.350.2 0.0530.008 1.350.2 0.0530.008 1.350.2 0.0530.008 4.00.2 0.1570.008 4.00.2 0.1570.008 4.00.2 0.1570.008 4.00.2 0.1570.008 4.00.2 0.1570.008 4.00.2 0.1570.008 2.3typ 0.091typ 2.3typ 0.091typ 2.3typ 0.091typ 2.3typ 0.091typ 2.3typ 0.091typ 2.3typ 0.091typ Standard quantity [pcs] Taping 1000 1000 1000 800 2500 500 1500 1000 1000 1000 2500 2000 1500 Unitmminch *3 1R5100 type *4 150470 type This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 36 13 Recommended Land Patterns NRV2010, NRS2012, NRV2012 Unitmm POWER INDUCTORS INDUCTORS NRS5010, NRS5012, NRS5014, NRS5020, NRS5024, NRS5030, NR 5040, NRS5040 Unitmm NRH2410, NRH2412 NR 3010, NRH3010, NR 3012, NRH3012, NRV3012, NR 3015, NRS3015 NR 4010, NRS4010, NR 4012, NRS4012, NR 4018, NRS4018 Unitmm Unitmm Unitmm NRS6010, NR 6012, NRS6012, NRS6014, NR 6020, NRS6020, NR 6028, NRS6028, NR 6045, NRS6045 NRS8030, NR 8040, NRS8040 Unitmm Unitmm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 36 -2 13 PARTS NUMBER NRS2012 Shielded type Parts number NRS2012T NRS2012T NRS2012T NRS2012T NRS2012T 1R0N GJ 1R5N GJ 2R2M GJ 3R3M GJ 4R7M GJ EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 30 30 20 20 20 0.070 0.090 0.107 0.190 0.241 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.47 0.68 1.0 1.5 2.2 3.3 4.7 30 30 30 20 20 20 20 0.052 0.060 0.080 0.100 0.175 0.250 0.320 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 30 30 20 20 20 0.073 0.100 0.129 0.227 0.325 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 30 30 20 20 20 20 20 20 20 20 120 106 94 77 56 50 43 32 27 22 0.060 0.070 0.110 0.150 0.220 0.290 0.410 0.690 1.02 1.47 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 30 30 30 20 20 20 20 20 180 101 89 72 56 45 34 29 0.050 0.077 0.100 0.140 0.225 0.300 0.420 0.600 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.2 1.5 2.2 3.3 4.7 6.8 10 15 22 30 30 20 20 20 20 20 20 20 120 99 86 64 50 44 34 25 22 0.065 0.075 0.083 0.130 0.170 0.250 0.350 0.550 0.770 Rated current A Saturation current Temperature rise current Idc2 Idc1 1,900 1,700 1,650 1,500 1,350 1,370 1,000 1,020 900 910 Measuring frequencykHz 100 100 100 100 100 NRV2010 type Parts number R47N GF R68N GF 1R0N GF 1R5M GF 2R2M GF 3R3M GF 4R7M GF Measuring frequencykHz 100 100 100 100 100 100 100 NRV2012 type Parts number NRV2012T NRV2012T NRV2012T NRV2012T NRV2012T 1R0N GF 1R5N GF 2R2M GF 3R3M GF 4R7M GF Rated current A Saturation current Temperature rise current Idc2 Idc1 2,200 1,650 1,800 1,400 1,600 1,200 1,250 900 1,100 750 Measuring frequencykHz 100 100 100 100 100 NRH2410 Shielded type Parts number NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T R68NN 4 1R0NN 4 1R5MN 2R2MN 3R3MN 4R7MN 6R8MN 100MN 150MN 220MN Rated current A Saturation current Temperature rise current Idc2 Idc1 2,200 1,570 1,800 1,410 1,550 1,160 1,290 970 1,000 770 880 670 750 570 550 450 470 370 390 300 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 POWER INDUCTORS INDUCTORS NRV2010T NRV2010T NRV2010T NRV2010T NRV2010T NRV2010T NRV2010T Rated current A Saturation current Temperature rise current Idc2 Idc1 2,100 2,000 1,850 1,850 1,550 1,600 1,350 1,450 1,100 1,100 880 1,000 760 820 NRH2412 Shielded type Parts number NRH2412T R47NNGJ NRH2412T 1R0NNGH NRH2412T 1R5NNGH NRH2412T 2R2MNGH NRH2412T 3R3MNGH NRH2412T 4R7MNGH NRH2412T 6R8MNGH NRH2412T 100MNGH Rated current A Saturation current Temperature rise current Idc2 Idc1 2,900 2,100 2,350 1,300 2,100 1,150 1,700 1,000 1,400 750 1,150 650 950 550 810 450 Measuring frequencykHz 100 100 100 100 100 100 100 100 NRH3010 Shielded type Parts number NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T 1R2NN 1R5NN 2R2MN 3R3MN 4R7MN 6R8MN 100MN 150MN 220MN Rated current A Saturation current Temperature rise current Idc2 Idc1 1,700 1,480 1,440 1,370 1,300 1,300 1,000 1,030 850 900 700 745 600 620 450 480 380 410 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 13 37 PARTS NUMBER NRH3012 Shielded type Parts number NRH3012T R47NN NRH3012T 1R0NN NRH3012T 1R5NN NRH3012T 2R2MN NRH3012T 3R3MN NRH3012T 4R7MN NRH3012T 6R8MN NRH3012T 100MN NRH3012T 150MN NRH3012T 220MN NRV3012 Shielded type Parts number POWER INDUCTORS INDUCTORS NRV3012T NRV3012T NRV3012T NRV3012T NRV3012T NRV3012T NRV3012T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 30 30 30 20 20 20 20 20 20 20 160 111 95 78 61 50 43 32 26 22 0.033 0.048 0.055 0.075 0.100 0.130 0.190 0.270 0.450 0.630 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 30 30 20 20 20 20 20 110 92 70 55 48 40 32 0.065 0.075 0.120 0.150 0.190 0.300 0.470 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 22 30 30 20 20 20 20 20 20 100 87 64 49 40 36 28 20 0.030 0.038 0.058 0.078 0.120 0.160 0.220 0.520 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 15 22 30 20 20 20 20 20 20 20 116 73 58 47 38 31 24 19 0.056 0.085 0.100 0.140 0.200 0.300 0.430 0.570 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 15 22 30 20 20 20 20 20 20 20 100 70 60 45 35 30 24 18 0.042 0.060 0.070 0.095 0.125 0.170 0.260 0.400 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 15 22 33 100 30 20 20 20 20 20 20 20 20 20 90 60 45 35 30 25 18 15 12 6.5 0.027 0.042 0.055 0.070 0.098 0.150 0.210 0.290 0.460 1.45 Rated current A Saturation current Temperature rise current Idc2 Idc1 2,600 1,900 2,200 1,710 1,700 1,600 1,500 1,370 1,200 1,210 1,000 1,060 850 890 730 720 530 570 500 500 Rated current A Saturation current Temperature rise current Idc2 Idc1 2,500 1,600 2,100 1,400 1,800 1,100 1,600 1,000 1,250 850 950 650 800 550 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 Measuring frequencykHz 100 100 100 100 100 100 100 NRS3015 Shielded type Parts number NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T NRS3015T 1R0NNGH 1R5NNGH 2R2MNGH 3R3MNGH 4R7MNGH 6R8MNGH 100MNGH 220MNGH Rated current A Saturation current Temperature rise current Idc2 Idc1 2,100 2,100 1,800 1,820 1,480 1,500 1,210 1,230 1,020 1,040 870 880 700 710 470 470 Measuring frequencykHz 100 100 100 100 100 100 100 100 NRS4010 Shielded type Parts number NRS4010T 1R0NDGG NRS4010T 2R2MDGG NRS4010T 3R3MDGG NRS4010T 4R7MDGG NRS4010T 6R8MDGG NRS4010T 100MDGG NRS4010T 150MDGG NRS4010T 220MDGG Rated current A Saturation current Temperature rise current Idc2 Idc1 2,000 1,900 1,200 1,500 1,100 1,400 950 1,200 800 1,000 620 750 540 600 450 500 Measuring frequencykHz 100 100 100 100 100 100 100 100 NRS4012 Shielded type Parts number NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T NRS4012T 1R0NDGG 2R2MDGJ 3R3MDGJ 4R7MDGJ 6R8MDGJ 100MDGJ 150MDGJ 220MDGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 2,800 2,200 1,650 1,900 1,400 1,700 1,200 1,500 900 1,300 800 1,100 650 750 500 620 Measuring frequencykHz 100 100 100 100 100 100 100 100 NRS4018 Shielded type Parts number NRS4018T 1R0NDGJ NRS4018T 2R2MDGJ NRS4018T 3R3MDGJ NRS4018T 4R7MDGJ NRS4018T 6R8MDGJ NRS4018T 100MDGJ NRS4018T 150MDGJ NRS4018T 220MDGJ NRS4018T 330MDGJ NRS4018T 101MDGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 4,000 3,200 3,000 2,200 2,300 2,000 2,000 1,700 1,600 1,450 1,300 1,200 1,100 850 900 720 700 550 420 280 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 38 13 PARTS NUMBER NRS5010 type Parts number NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T NRS5010T 1R0NMGF 2R2NMGF 3R3MMGF 4R7MMGF 6R8MMGF 100MMGF 150MMGF 220MMGF EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 15 22 30 30 20 20 20 20 20 20 95 65 42 37 33 23 19 15 0.070 0.105 0.125 0.145 0.185 0.250 0.400 0.600 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 30 30 20 20 20 20 20 20 100 86 70 48 40 36 26 22 0.053 0.070 0.085 0.160 0.180 0.260 0.420 0.670 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.47 1.2 2.2 3.3 4.7 6.8 10 15 22 30 30 30 30 30 20 20 20 20 185 86 56 48 41 33 27 20 16 0.025 0.045 0.065 0.080 0.100 0.150 0.200 0.320 0.450 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 30 30 30 30 30 20 20 20 20 20 230 81 68 57 46 37 30 24 20 17 0.012 0.021 0.026 0.035 0.048 0.060 0.090 0.120 0.165 0.260 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 30 30 30 30 20 20 20 20 20 20 85 67 51 41 37 28 21 18 15 11 0.016 0.022 0.029 0.043 0.055 0.080 0.125 0.170 0.230 0.370 Rated current A Saturation current Temperature rise current Idc2 Idc1 2,350 1,750 1,500 1,400 1,400 1,250 1,200 1,150 1,000 1,000 850 900 680 650 550 450 Measuring frequencykHz 100 100 100 100 100 100 100 100 NRS5012 type Parts number 1R0NMGF 1R5NMGF 2R2MMGF 3R3MMGF 4R7MMGF 6R8MMGF 100MMGF 150MMGF Measuring frequencykHz 100 100 100 100 100 100 100 100 NRS5014 Shielded type Parts number NRS5014T R47NMGG NRS5014T 1R2NMGG NRS5014T 2R2NMGG NRS5014T 3R3NMGG NRS5014T 4R7NMGG NRS5014T 6R8MMGG NRS5014T 100MMGG NRS5014T 150MMGG NRS5014T 220MMGG Rated current A Saturation current Temperature rise current Idc2 Idc1 5,800 3,300 3,800 2,400 2,800 2,000 2,350 1,700 2,050 1,400 1,600 1,200 1,400 1,050 1,100 650 900 550 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 NRS5020 Shielded type Parts number NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T R47NMGJ 1R0NMGJ 1R5NMGJ 2R2NMGJ 3R3NMGJ 4R7MMGJ 6R8MMGJ 100MMGJ 150MMGJ 220MMGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 6,100 5,000 4,000 3,600 3,350 3,200 2,900 2,900 2,400 2,400 2,000 2,000 1,600 1,650 1,300 1,450 1,100 1,200 900 1,000 POWER INDUCTORS INDUCTORS NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T Rated current A Saturation current Temperature rise current Idc2 Idc1 4,500 2,300 3,800 2,200 3,100 2,000 2,400 1,450 2,200 1,400 1,700 1,100 1,400 850 1,200 640 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 NRS5024 Shielded type Parts number NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T NRS5024T 1R0NMGJ 1R5NMGJ 2R2NMGJ 3R3NMGJ 4R7MMGJ 6R8MMGJ 100MMGJ 150MMGJ 220MMGJ 330MMGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 5,800 4,400 5,200 3,600 4,100 3,100 3,100 2,400 2,700 2,000 2,200 1,600 1,700 1,200 1,400 1,000 1,200 820 1,000 630 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 13 39 PARTS NUMBER NRS5030 type Parts number NRS5030T R47NMGJ NRS5030T 1R0NMGJ NRS5030T 2R2NMGJ NRS5030T 3R3MMGJ NRS5030T 4R7MMGJ NRS5030T 6R8MMGJ NRS5030T 100MMGJ NRS5030T 150MMGJ NRS5030T 220MMGJ NRS5030T 330MMGJ NRS5030T 470MMGJ EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.47 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 30 20 20 20 20 20 20 20 20 185 110 46 36 31 22 20 14 13 10 9 0.010 0.015 0.023 0.030 0.035 0.052 0.070 0.125 0.180 0.225 0.325 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 30 30 20 20 20 20 20 20 60 42 32 28 21 18 13 9 7 6 0.017 0.022 0.027 0.029 0.049 0.056 0.080 0.126 0.180 0.310 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.5 2.2 3.3 4.7 6.8 10 22 20 20 20 20 20 20 20 77 56 42 36 30 25 12 0.090 0.110 0.135 0.165 0.220 0.270 0.580 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.5 3.3 4.7 5.3 6.8 10 15 22 33 47 68 100 30 30 30 30 20 20 20 20 20 20 20 20 20 20 95 69 45 42 36 34 30 22 18 12 8 6 3 1 0.050 0.067 0.090 0.105 0.125 0.125 0.165 0.200 0.295 0.465 0.580 0.965 1.16 1.67 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.2 2.2 3.3 4.7 6.8 10 15 22 30 30 30 20 20 20 20 20 77 61 41 36 30 24 20 16 0.042 0.055 0.075 0.090 0.115 0.140 0.210 0.300 Rated current A Saturation current Temperature rise current Idc2 Idc1 9,000 5,000 6,600 4,000 4,200 3,500 3,600 3,000 3,100 2,600 2,500 2,300 2,100 1,700 1,600 1,400 1,400 1,050 1,150 800 950 700 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 NRS5040 Shielded type Parts number POWER INDUCTORS INDUCTORS NRS5040T 1R5NMGJ NRS5040T 2R2NMGJ NRS5040T 3R3NMGJ NRS5040T 4R7NMGK NRS5040T 6R8MMGJ NRS5040T 100MMGJ NRS5040T 150MMGJ NRS5040T 220MMGK NRS5040T 330MMGJ NRS5040T 470MMGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 6,400 4,500 5,000 3,700 4,000 3,300 3,300 3,100 2,800 2,400 2,300 2,100 2,000 1,800 1,500 1,400 1,300 1,200 1,100 900 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 NRS6010 type Parts number NRS6010T 1R5MMGF NRS6010T 2R2MMGF NRS6010T 3R3MMGF NRS6010T 4R7MMGF NRS6010T 6R8MMGF NRS6010T 100MMGF NRS6010T 220MMGF Rated current A Saturation current Temperature rise current Idc2 Idc1 2,400 1,900 1,900 1,700 1,600 1,500 1,300 1,400 1,200 1,200 1,000 1,100 650 700 Measuring frequencykHz 100 100 100 100 100 100 100 NRS6012 Shielded type Parts number NRS6012T 1R0NMGJ NRS6012T 1R5NMGG NRS6012T 2R5NMGG NRS6012T 3R3NMGG NRS6012T 4R7MMGG NRS6012T 5R3MMGJ NRS6012T 6R8MMGJ NRS6012T 100MMGJ NRS6012T 150MMGJ NRS6012T 220MMGJ NRS6012T 330MMGJ NRS6012T 470MMGJ NRS6012T 680MMGJ NRS6012T 101MMGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 3,000 2,400 2,600 2,100 2,100 1,800 1,800 1,700 1,600 1,550 1,500 1,550 1,300 1,350 1,000 1,200 800 800 760 650 590 550 520 460 440 410 350 320 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 100 100 100 NRS6014 Shielded type Parts number NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T NRS6014T 1R2NMGG 2R2NMGG 3R3NMGG 4R7MMGG 6R8MMGG 100MMGG 150MMGG 220MMGG Rated current A Saturation current Temperature rise current Idc2 Idc1 4,000 2,750 3,000 2,300 2,500 2,000 2,000 1,900 1,700 1,650 1,400 1,400 1,150 1,200 950 1,000 Measuring frequencykHz 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 40 13 PARTS NUMBER NRS6020 Shielded type Parts number NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T NRS6020T 0R8NMGG 1R5NMGJ 2R2NMGJ 3R3NMGJ 4R7NMGJ 6R8NMGJ 100MMGG 220MMGG EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.8 1.5 2.2 3.3 4.7 6.8 10 22 30 30 30 30 30 30 20 20 110 93 73 55 43 30 18 11 0.020 0.026 0.034 0.040 0.058 0.085 0.125 0.290 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.9 1.5 2.2 3.0 4.7 6.0 10 15 22 33 47 68 100 30 30 30 30 20 20 20 20 20 20 20 20 20 90 78 68 55 39 30 20 17 12 10 8 5 3 0.013 0.016 0.020 0.023 0.031 0.040 0.065 0.095 0.135 0.220 0.300 0.420 0.600 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.3 1.8 2.3 3.0 4.5 6.3 10 15 22 33 47 68 100 30 30 30 30 30 20 20 20 20 20 20 20 20 20 110 95 80 60 45 25 15 12 10 7 6 5 4 3 0.014 0.016 0.019 0.022 0.024 0.030 0.036 0.046 0.070 0.107 0.141 0.211 0.304 0.466 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 30 20 20 20 20 20 20 20 20 120 80 60 50 40 32 27 20 16 13 11 0.009 0.012 0.015 0.019 0.022 0.029 0.033 0.060 0.070 0.120 0.170 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.9 1.4 2.0 3.6 4.7 6.8 10 15 22 30 30 30 30 30 30 20 20 20 85 63 50 34 30 24 22 16 13 0.006 0.007 0.009 0.015 0.018 0.025 0.034 0.050 0.066 Rated current A Saturation current Temperature rise current Idc2 Idc1 6,400 4,100 4,300 3,600 3,200 2,900 2,800 2,750 2,400 2,150 2,000 1,800 1,900 1,500 1,250 950 Measuring frequencykHz 100 100 100 100 100 100 100 100 NRS6028 Shielded type Parts number 0R9NMGJ 1R5NMGJ 2R2NMGJ 3R0NMGJ 4R7MMGK 6R0MMGK 100MMGK 150MMGJ 220MMGJ 330MMGJ 470MMGJ 680MMGJ 101MMGJ Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 100 100 NRS6045 Shielded type Parts number NRS6045T 1R0NMGK NRS6045T 1R3NMGK NRS6045T 1R8NMGK NRS6045T 2R3NMGK NRS6045T 3R0NMGK NRS6045T 4R5MMGK NRS6045T 6R3MMGK NRS6045T 100MMGK NRS6045T 150MMGK NRS6045T 220MMGK NRS6045T 330MMGK NRS6045T 470MMGK NRS6045T 680MMGK NRS6045T 101MMGK Rated current A Saturation current Temperature rise current Idc2 Idc1 9,800 4,500 8,200 4,200 7,200 3,900 6,400 3,600 5,600 3,300 4,400 3,100 3,600 3,000 3,100 2,400 2,500 1,900 2,000 1,600 1,650 1,400 1,400 1,150 1,100 950 900 750 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 100 100 100 POWER INDUCTORS INDUCTORS NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T NRS6028T Rated current A Saturation current Temperature rise current Idc2 Idc1 6,700 4,600 5,100 4,200 4,200 3,700 3,600 3,400 2,700 3,000 2,500 2,500 1,900 1,900 1,600 1,800 1,300 1,400 1,100 1,100 1,000 920 800 770 650 660 NRS8030 Shielded type Parts number NRS8030T 1R0NJGJ NRS8030T 1R5NJGJ NRS8030T 2R2NJGJ NRS8030T 3R3MJGJ NRS8030T 4R7MJGJ NRS8030T 6R8MJGJ NRS8030T 100MJGJ NRS8030T 150MJGJ NRS8030T 220MJGJ NRS8030T 330MJGJ NRS8030T 470MJGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 7,800 6,200 6,200 5,300 4,900 4,800 4,200 4,300 3,600 4,000 3,000 3,400 2,400 3,000 2,000 2,200 1,750 1,900 1,300 1,500 1,100 1,300 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 NRS8040 Shielded type Parts number NRS8040T 0R9NJGJ NRS8040T 1R4NJGJ NRS8040T 2R0NJGJ NRS8040T 3R6NJGJ NRS8040T 4R7NJGJ NRS8040T 6R8NJGJ NRS8040T 100MJGJ NRS8040T 150MJGJ NRS8040T 220MJGJ Rated current A Saturation current Temperature rise current Idc2 Idc1 13,000 7,800 10,000 7,000 8,100 6,300 6,400 4,900 5,400 4,100 4,400 3,700 3,800 3,100 2,900 2,400 2,400 2,200 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 13 41 PARTS NUMBER NR 3010 Shielded type Parts number NR 3010T 1R0N NR 3010T 1R5N NR 3010T 2R2M NR 3010T 3R3M NR 3010T 4R7M NR 3010T 6R8M NR 3010T 100M NR 3010T 150M NR 3010T 220M NR 3010T 330M NR 3010T 470M EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 20 20 20 20 20 20 20 20 20 126 98 82 63 56 46 35 30 25 20 17 0.065 0.080 0.095 0.140 0.190 0.300 0.450 0.740 1.03 1.55 2.05 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 20 20 20 20 20 20 20 20 20 110 92 70 55 48 40 32 27 22 19 17 0.050 0.060 0.080 0.100 0.130 0.190 0.290 0.450 0.630 1.03 1.45 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 20 20 20 20 20 20 20 20 20 100 87 64 49 40 36 28 23 20 18 17 0.030 0.040 0.060 0.080 0.120 0.160 0.230 0.360 0.520 0.840 1.34 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 20 20 20 20 20 20 20 20 116 73 58 47 38 31 24 19 15 13 0.100 0.150 0.180 0.210 0.300 0.380 0.510 0.870 1.54 1.81 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 30 20 20 20 20 20 20 20 20 20 131 66 50 45 35 28 23 18 15 12 0.060 0.090 0.130 0.140 0.180 0.240 0.400 0.480 0.810 1.00 Rated current A Saturation current Temperature rise current Idc2 Idc1 1,300 1,400 1,200 1,300 1,100 1,100 870 940 750 780 610 630 500 510 400 400 350 350 260 275 220 235 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 NR 3012 Shielded type Parts number POWER INDUCTORS INDUCTORS NR 3012T 1R0N NR 3012T 1R5N NR 3012T 2R2M NR 3012T 3R3M NR 3012T 4R7M NR 3012T 6R8M NR 3012T 100M NR 3012T 150M NR 3012T 220M NR 3012T 330M NR 3012T 470M Rated current A Saturation current Temperature rise current Idc2 Idc1 1,500 1,490 1,360 1,400 1,100 1,200 910 1,050 770 980 670 740 540 630 440 485 375 420 310 330 250 280 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 NR 3015 Shielded type Parts number NR 3015T 1R0N NR 3015T 1R5N NR 3015T 2R2M NR 3015T 3R3M NR 3015T 4R7M NR 3015T 6R8M NR 3015T 100M NR 3015T 150M NR 3015T 220M NR 3015T 330M NR 3015T 470M Rated current A Saturation current Temperature rise current Idc2 Idc1 2,100 2,100 1,800 1,820 1,480 1,500 1,210 1,230 1,020 1,040 870 880 700 710 560 560 470 470 390 370 320 300 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 NR 4010 Shielded type Parts number NR 4010T 1R0N NR 4010T 2R2N NR 4010T 3R3M NR 4010T 4R7M NR 4010T 6R8M NR 4010T 100M NR 4010T 150M NR 4010T 220M NR 4010T 330M NR 4010T 470M Rated current A Saturation current Temperature rise current Idc2 Idc1 1,800 1,050 1,150 890 1,100 820 900 750 740 620 560 600 470 510 360 400 280 300 240 280 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 NR 4012 Shielded type Parts number NR 4012T 1R0N NR 4012T 2R2M NR 4012T 3R3M NR 4012T 4R7M NR 4012T 6R8M NR 4012T 100M NR 4012T 150M NR 4012T 220M NR 4012T 330M NR 4012T 470M Rated current A Saturation current Temperature rise current Idc2 Idc1 2,500 1,500 1,650 1,200 1,200 980 1,050 960 900 840 740 770 560 600 510 540 400 420 350 370 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 42 13 PARTS NUMBER NR 4018 Shielded type Parts number NR 4018T 1R0N NR 4018T 2R2M NR 4018T 3R3M NR 4018T 4R7M NR 4018T 6R8M NR 4018T 100M NR 4018T 150M NR 4018T 220M NR 4018T 330M NR 4018T 470M NR 4018T 680M NR 4018T 101M NR 4018T 151M NR 4018T 221M Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 30 20 20 20 20 20 20 20 20 20 20 20 20 20 80 52 44 34 29 24 19 16 12 10 8.3 6.5 5.5 4.0 0.030 0.060 0.070 0.090 0.110 0.180 0.250 0.360 0.530 0.650 1.00 1.50 2.50 4.00 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 30 30 30 30 20 20 20 20 20 20 60 42 32 28 21 18 13 9 7 6 0.020 0.022 0.027 0.029 0.049 0.056 0.080 0.126 0.180 0.310 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 2.5 4.0 5.3 6.8 10 15 22 33 47 68 100 30 30 20 20 20 20 20 20 20 20 20 45 39 34 30 22 18 12 8 6 3 1 0.090 0.105 0.125 0.165 0.235 0.330 0.530 0.700 1.05 1.35 2.18 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 20 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.8 1.5 2.2 3.3 4.7 6.8 10 22 30 30 30 30 30 30 20 20 110 93 73 55 43 30 18 11 0.020 0.026 0.034 0.040 0.058 0.085 0.125 0.290 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.9 1.5 2.2 3.0 4.7 6.0 10 15 22 33 47 68 100 30 30 30 30 20 20 20 20 20 20 20 20 20 90 78 68 55 39 30 20 17 12 10 8 5 3 0.013 0.016 0.020 0.023 0.031 0.040 0.065 0.095 0.135 0.220 0.300 0.420 0.600 Rated current A Saturation current Temperature rise current Idc2 Idc1 4,000 1,830 2,700 1,440 2,000 1,230 1,700 1,200 1,450 1,060 1,200 840 940 650 800 590 650 490 570 420 470 320 400 270 310 220 270 170 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 100 100 100 NR 5040 Shielded type Parts number NR 5040T 1R5N NR 5040T 2R2N NR 5040T 3R3N NR 5040T 4R7N NR 5040T 6R8M NR 5040T 100M NR 5040T 150M NR 5040T 220M NR 5040T 330M NR 5040T 470M Rated current A Saturation current Temperature rise current Idc2 Idc1 6,000 3,600 4,600 3,500 3,800 3,300 3,300 3,100 2,600 2,300 2,300 2,100 2,000 1,800 1,600 1,400 1,300 1,200 1,100 900 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 NR 6012 Shielded type Parts number NR NR NR NR NR NR NR NR NR NR NR 6012T 6012T 6012T 6012T 6012T 6012T 6012T 6012T 6012T 6012T 6012T 2R5NE 4R0NE 5R3ME 6R8ME 100ME 150ME 220ME 330ME 470ME 680ME 101ME Rated current A Saturation current Temperature rise current Idc2 Idc1 2,100 1,730 1,800 1,570 1,500 1,400 1,300 1,180 1,000 1,000 800 790 760 630 590 530 520 460 440 410 350 320 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 POWER INDUCTORS INDUCTORS EHS NR 6020 Shielded type Parts number NR 6020T 0R8N NR 6020T 1R5N NR 6020T 2R2N NR 6020T 3R3N NR 6020T 4R7N NR 6020T 6R8N NR 6020T 100M NR 6020T 220M Rated current A Saturation current Temperature rise current Idc2 Idc1 5,500 3,800 4,000 3,200 3,200 2,700 2,800 2,600 2,400 2,000 2,000 1,800 1,700 1,400 1,050 950 Measuring frequencykHz 100 100 100 100 100 100 100 100 NR 6028 Shielded type Parts number NR 6028T 0R9N NR 6028T 1R5N NR 6028T 2R2N NR 6028T 3R0N NR 6028T 4R7M NR 6028T 6R0M NR 6028T 100M NR 6028T 150M NR 6028T 220M NR 6028T 330M NR 6028T 470M NR 6028T 680M NR 6028T 101M Rated current A Saturation current Temperature rise current Idc2 Idc1 6,600 4,600 5,000 4,200 4,200 3,700 3,600 3,400 2,700 3,000 2,500 2,500 1,900 1,900 1,600 1,800 1,300 1,400 1,100 1,100 950 920 760 770 620 660 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 13 43 PARTS NUMBER NR 6045 Shielded type Parts number NR 6045T 1R0N NR 6045T 1R3N NR 6045T 1R8N NR 6045T 2R3N NR 6045T 3R0N NR 6045T 4R5M NR 6045T 6R3M NR 6045T 100M NR 6045T 150M NR 6045T 220M NR 6045T 330M NR 6045T 470M NR 6045T 680M NR 6045T 101M POWER INDUCTORS INDUCTORS EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1.0 1.3 1.8 2.3 3.0 4.5 6.3 10 15 22 33 47 68 100 30 30 30 30 30 20 20 20 20 20 20 20 20 20 110 95 80 60 45 25 15 12 10 7 6 5 4 3 0.014 0.016 0.018 0.021 0.024 0.031 0.038 0.047 0.077 0.115 0.145 0.220 0.330 0.500 EHS Nominal inductance H Inductance tolerance Self-resonant frequency MHmin. DC Resistance 30 RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 0.9 1.4 2.0 3.6 4.7 6.8 10 15 22 33 47 68 100 30 30 30 30 30 30 20 20 20 20 20 20 20 85 63 50 34 30 24 22 16 13 12 8 7 6 0.006 0.007 0.009 0.015 0.018 0.025 0.034 0.050 0.066 0.100 0.150 0.230 0.290 Rated current A Saturation current Temperature rise current Idc2 Idc1 8,500 4,200 8,000 4,000 7,000 3,700 6,000 3,500 5,000 3,200 4,000 3,000 3,800 2,800 3,000 2,500 2,300 1,900 1,900 1,500 1,500 1,400 1,300 1,100 1,000 900 800 700 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 100 100 100 NR 8040 Shielded type Parts number NR NR NR NR NR NR NR NR NR NR NR NR NR 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 8040T 0R9N 1R4N 2R0N 3R6N 4R7N 6R8N 100M 150M 220M 330M 470M 680M 101M Rated current A Saturation current Temperature rise current Idc2 Idc1 11,000 7,800 9,000 7,000 7,400 6,300 5,300 4,900 4,700 4,100 4,000 3,700 3,400 3,100 2,700 2,400 2,200 2,200 1,900 1,700 1,500 1,400 1,200 1,100 1,000 1,000 Measuring frequencykHz 100 100 100 100 100 100 100 100 100 100 100 100 100 The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current valueIdc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 44 13 SMD POWER INDUCTORS (NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE) PACKAGING Minimum Quantity Type NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 NRH3010 NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 Standard Quantity [pcs] Tape Reel 2500 Type NRS5010 NRS5012 NRS5014 NRS5020 NRS5024 NRS5030 NR 5040 NRS5040 NRS6010 NR 6012 NRS6012 NRS6014 NR 6020 NRS6020 NR 6028 NRS6028 NR 6045 NRS6045 NRS8030 NR 8040 NRS8040 2500 2500 2500 2000 2000 2000 5000 4500 3500 Standard Quantity [pcs] Tape Reel 1000 1000 1000 800 2500 500 1500 1000 1000 1000 2500 2000 1500 1000 1000 Tape Material Embossed Tape Taping dimensions Embossed tape 8mm wide (0.315 inches wide) Type NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 NRH3010 NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 Chip cavity A B 2.20.1 0.1020.004 2.60.1 0.0870.004 Insertion pitch F Tape thickness T K 2.20.1 0.1020.004 0.250.05 0.0090.002 1.30.1 0.0510.004 2.60.1 0.1020.004 0.250.05 0.0090.002 1.30.1 0.0510.004 1.40.1 0.0550.004 1.60.1 0.0630.004 4.00.1 0.1570.004 3.20.1 0.1260.004 3.20.1 0.1260.004 0.30.05 0.0120.002 1.90.1 0.0750.004 Unitmminch This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-01 Embossed tape 12mm wide (0.47 inches wide) Type NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 Chip cavity A B 4.30.1 0.1690.004 4.30.1 0.1690.004 Insertion pitch F NRS5010 0.30.1 0.0120.004 NRS5012 NRS5014 Tape thickness T 5.250.1 0.2070.004 5.250.1 0.2070.004 5.150.1 0.2030.004 5.150.1 0.2030.004 5.150.1 0.2030.004 5.150.1 0.2030.004 NRS5020 NRS5024 NRS5030 NR 5040 NRS5040 8.00.1 0.3150.004 NRS6010 NR 6012 NRS6012 NRS6014 NR 6020 NRS6020 NR 6028 NRS6028 NR 6045 NRS6045 0.40.1 0.0160.004 6.30.1 0.2480.004 6.30.1 0.2480.004 K 1.40.1 0.0550.004 1.60.1 0.0630.004 2.10.1 0.0830.004 1.40.1 0.0550.004 1.40.1 0.0550.004 1.60.1 0.0630.004 2.30.1 0.0910.004 2.70.1 0.1060.004 3.20.1 0.1260.004 4.20.1 0.1650.004 1.40.1 0.0550.004 1.60.1 0.0630.00 1.60.1 0.0630.04 2.30.1 0.0900.004 3.10.1 0.1220.004 4.70.1 0.1850.004 Unitmminch Embossed tape 16mm wide (0.63 inches wide) Type NRS8030 NR 8040 NRS8040 A Chip cavity B Insertion pitch F T Tape thickness 8.30.1 0.3270.004 8.30.1 0.3270.004 12.00.1 0.4720.004 0.50.1 0.0200.004 K 3.40.1 0.1340.004 4.50.1 0.1770.004 Unitmminch This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-01 Leader and Blank portion NR, NRH, NRS, NRV Reel size Type NRV2010 NRS2012 NRV2012 NRH2410 NRH2412 NR 3010 NRH3010 NR 3012 NRH3012 NRV3012 NR 3015 NRS3015 NRS5010 NRS5012 NRS5014 NRS5020 NRS5030 NRS6010 NR 6012 NRS6012 NRS6014 D Reel size (Reference values) d W 1800.5 7.0870.019 601.0 2.360.04 10.01.5 0.3940.059 1803.0 7.0870.118 602.0 2.360.08 14.01.5 0.5510.059 Unitmminch This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-01 Type NR 4010 NRS4010 NR 4012 NRS4012 NR 4018 NRS4018 NRS5024 NR 5040 NRS5040 NR 6020 NRS6020 NR 6028 NRS6028 NR 6045 NRS6045 NRS8030 NR 8040 NRS8040 D 3303.0 12.990.118 Reel size (Reference values) d tmax. 802.0 3.150.078 W 18.5 0.72 13.51.0 0.5310.04 22.5 0.89 17.51.0 0.6890.04 Unitmminch Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_pack_e-01 SMD inductor NR, NS series RELIABILITY DATA 1. Operating Temperature Range Specified Value Test Methods and Remarks NR30/40/50/60/80, NRS20, NRV20/30, NRH24/30 Type 25120 NRS40/50/60/80 Type 25125 NR10050 Type 25105 NS101, NS125 Type 40125 Including self-generated heat 2. Storage Temperature Range NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value 4085 NR10050 Type NS101, NS125 Type Test Methods and Remarks NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type 5 to 40 for the product with taping. 3. Rated current NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Within the specified tolerance NR10050 Type NS101, NS125 Type 4. Inductance NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Within the specified tolerance NR10050 Type NS101, NS125 Type Test Methods and Remarks Measuring equipment : LCR Meter HP 4285A or equivalent Measuring frequency : Specified frequency NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type Measuring equipment : LCR Meter HP 4285A or equivalent Measuring frequency : 100kHz, 1V NR10050 Type : Measuring equipment : LCR Meter HP 4263A or equivalent Measuring frequency : 100kHz, 1V : 5. DC Resistance NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Within the specified tolerance NR10050 Type NS101, NS125 Type Test Methods and Remarks Measuring equipment : DC ohmmeter HIOKI 3227 or equivalent 6. Self resonance frequency NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type Specified Value NR10050 Type Within the specified tolerance NS101, NS125 Type Test Methods and Remarks NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NR10050 Type, NS101/125 Type : Measuring equipment : Impedance analyzer/material analyzerHP4291A or equivalent HP4191A, 4192A or equivalent This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-01 7. Temperature characteristic NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Inductance change : Within 20% NR10050 Type NS101, NS125 Type Inductance change : Within 15% NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type : Measurement of inductance shall be taken at temperature range within 2585. With reference to inductance value at 20., change rate shall be calculated. Test Methods and Remarks NS101, NS125 Type : Measurement of inductance shall be taken at temperature range within 40125. With reference to inductance value at 20., change rate shall be calculated. Change of maximum inductance deviation in step 1 to 5 Step Temperature 1 20 2 Minimum operating temperature 3 20 (Standard temperature) 4 Maximum operating temperature 5 20 8. Resistance to flexure of substrate Specified Value NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type No damage NR10050 Type NS101, NS125 Type No damage NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board reaches to 2 mm. Test board size : 100x40x1.0 Test board material : glass epoxy-resin Solder cream thickness : 0.10 (NR30, NRS20, NRH24/30, NRV20/30) : 0.15 (NR40/50/60/80, NRS40/50/60, NS101/125Type) Test Methods and Remarks 9. Insulation resistance : between wires NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type NS101, NS125 Type 10. Insulation resistance : between wire and core NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type NS101, NS125 Type 11. Withstanding voltage : between wire and core NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type NS101, NS125 Type This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-01 12. Adhesion of terminal electrode NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Shall not come off PC board NR10050 Type NS101, NS125 Type Test Methods and Remarks NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. Applied force : 10N to X and Y directions. Duration : 5s. Solder cream thickness : 0.15mm. NR10050 Type : Applied force Duration : 5N to X and Y directions. : 5s. 13. Resistance to vibration NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type Inductance change : Within 10% No significant abnormality in appearance. NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. Then it shall be submitted to below test conditions. Test Methods and Remarks Frequency Range Total Amplitude Sweeping Method Time 1055Hz 1.5mm (May not exceed acceleration 196m/s2) 10Hz to 55Hz to 10Hz for 1min. X Y For 2 hours on each X, Y, and Z axis. Z Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 14. Solderability NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type At least 90 of surface of terminal electrode is covered by new solder. NS101, NS125 Type Test Methods and Remarks The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table. Flux : Methanol solution containing rosin 25%. NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type Solder Temperature 2455 Time 51.0 sec. Immersion depth : All sides of mounting terminal shall be immersed. 15. Resistance to soldering heat NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type Inductance change : Within 10% No significant abnormality in appearance. NS101, NS125 Type NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test sample shall be exposed to reflow oven at 2305 for 40 seconds, with peak temperature at 2605 for 5 seconds, 2 times. Test Methods and Remarks NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80Type, NS101/125 Type Test board material : glass epoxy-resin Test board thickness : 1.0mm NR10050 Type Test board material : glass epoxy-resin Test board thickness : 1.6mm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-01 16. Thermal shock NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type Inductance change : Within 10% No significant abnormality in appearance. NS101, NS125 Type Test Methods and Remarks NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 100 cycles. Conditions of 1 cycle Step Temperature () Duration (min) 1 403 303 2 Room temperature Within 3 3 852 303 4 Room temperature Within 3 17. Damp heat NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Test Methods and Remarks Inductance change : Within 10% No significant abnormality in appearance. NR10050 Type NS101, NS125 Type Inductance change : Within 10% No significant abnormality in appearance. NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table. Temperature 602 Humidity 9095%RH Time 50024/0 hour 18. Loading under damp heat NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type Inductance change : Within 10% No significant abnormality in appearance. NS101, NS125 Type Test Methods and Remarks NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table. Temperature 602 Humidity 9095RH Applied current Rated current Time 50024/0 hour 19. Low temperature life test NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type Inductance change : Within 10% No significant abnormality in appearance. NS101, NS125 Type Test Methods and Remarks NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type : The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown in below table. Temperature 402 Time 50024/0 hour This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-01 20. High temperature life test Specified Value Test Methods and Remarks NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type NR10050 Type Inductance change : Within 10% No significant abnormality in appearance. NS101, NS125 Type NR10050 Type : Temperature 1053 Time 50024/0 hour Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48hrs. 21. Loading at high temperature life test NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value Test Methods and Remarks Inductance change : Within 10% No significant abnormality in appearance. NR10050 Type NS101, NS125 Type Inductance change : Within 10% No significant abnormality in appearance. NR30/40/50/60/80, NRV30, NRH24/30, NRS40/50/60/80 Type, NS12555, NS12565, NS12575 Type : The test samples shall be soldered to the test board by the reflow soldering. Temperature 852 Applied current Rated current Time 50024/0 hour 22. Standard condition NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type Specified Value NR10050 Type NS101, NS125 Type Standard test condition : Unless otherwise specified, temperature is 2015 and 6520of relative humidity. When there is any question concerning measurement result: In order to provide correlation data, the test shall be condition of 202 of temperature, 655% relative humidity. Inductance is in accordance with our measured value. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . i_smd_NR_NS_reli_e-01 SMD inductor NR, NS series PRECAUTIONS 1. Circuit Design Precautions Operating environment 1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2. PCB Design Precautions Technical considerations Land pattern design 1. Please refer to a recommended land pattern. Land pattern design Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to this products is reflow soldering only. 3. Considerations for automatic placement Precautions Technical considerations Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. 2. Mounting and soldering conditions should be checked beforehand. Adjustment of mounting machine 1. When installing products, care should be taken not to apply distortion stress as it may deform the products. 4. Soldering Precautions Reflow soldering 1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 2. The product shall be used reflow soldering only. 3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering. Lead free soldering 1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering heat, soldering etc sufficiently. Recommended conditions for using a soldering iron (NR10050 Type) Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350 Duration - 3 seconds or less The soldering iron should not directly touch the inductor. Reflow soldering 1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. NR30/40/50/60/80, NRV20/30, NRH24/30, NRS20/40/50/60/80 Type, NR10050 Type, NS101/125 Type Recommended reflow condition (Pb free solder) Technical considerations 5. Cleaning Precautions Technical considerations Cleaning conditions 1. Washing by supersonic waves shall be avoided. Cleaning conditions 1. If washed by supersonic waves, the products might be broken. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) i_smd_NR_NS_prec_e-01 6. Handling Precautions Technical considerations Handling 1. Keep the product away from all magnets and magnetic objects. Breakaway PC boards (splitting along perforations) 1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board. 2. Board separation should not be done manually, but by using the appropriate devices. Mechanical considerations 1. Please do not give the product any excessive mechanical shocks. 2. Please do not add any shock and power to a product in transportation. Pick-up pressure 1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part. Packing 1. Please avoid accumulation of a packing box as much as possible. Handling 1. There is a case that a characteristic varies with magnetic influence. Breakaway PC boards (splitting along perforations) 1. The position of the product on PCBs shall be carefully considered to minimize the stress caused from splitting of the PCBs. Mechanical considerations 1. There is a case to be damaged by a mechanical shock. 2. There is a case to be broken by the handling in transportation. Pick-up pressure 1. Damage and a characteristic can vary with an excessive shock or stress. Packing 1. If packing boxes are accumulated, that could cause a deformation on packing tapes or a damage on the products. 7. Storage conditions Precautions Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. Recommended conditions Ambient temperature : 540 Humidity : Below 70% RH The ambient temperature must be kept below 30. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within 6 months from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Technical considerations Storage 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) i_smd_NR_NS_prec_e-01