Triac Driver Output (400 Volts) Type Photocoupler MOC3020 / MOC3021 / MOC3022 / MOC3023 Series Features Package Dimensions Isolation voltage between input and output Viso : 5,000Vrms 6pin DIP photocoupler, triac driver output High repetitive peak off-state voltage VDRM : Min. 400V High critical rate of rise of off-state voltage ( dV/dt : MIN. 100V / s) UL approved ( No. E113898 ) VDE approve in progress FIMKO approved ( No. 209049 ) SEMKO approved ( No. 9943380/01-20 ) NEMKO approved ( No. P99102464 ) DEMKO approved ( No. 99-04182 ) CSA approve in progress Options Available : - Leads with 0.4" (10.16mm) Spacing (M Type) - Lead Bends for Surface Mounting (S Type) - Tape and Reel of Type I for SMD (Add "-TA" Suffix) - Tape and Reel of Type II for SMD (Add "-TA1" Suffix) - VDE 0884 Approvals (Add "-V" Suffix) Applications 1. 2. 3. 4. 5. 6. 7. 12-166 Solenoid / Valve Controls Lamp Ballasts Interfacing Microprocessors to 115Vac Peripherals Motor Controls Static ac Power Switch Solid State Relays Incandescent Lamp Dimmers NOTES : 1. Year date code. 2. 2-digit work week. 3. Factory code shall be marked (Z Taiwan, Y Thailand). 4. Model No.: MOC3020 ; MOC3021 ; MOC3022 ; MOC3023 5. All dimensions are in millimeters (inches). 6. Tolerance is 0.25mm (.010") unless otherwise noted. 7. Specifications are subject to change without notice. Ordering Information MOC3020 MOC3020M MOC3020S MOC3020-TA MOC3020S-TA1 MOC3021 MOC3021M MOC3021S MOC3021S-TA MOC3021S-TA1 MOC3022 MOC3022M MOC3022S MOC3022S-TA MOC3022S-TA1 MOC3023 MOC3023M MOC3023S MOC3023S-TA MOC3023S-TA1 MOC3020-V MOC3020M-V MOC3020S-V MOC3020STA-V MOC3020STA1-V MOC3021-V MOC3021M-V MOC3021S-V MOC3021STA-V MOC3021STA1-V MOC3022-V MOC3022M-V MOC3022S-V MOC3022STA-V MOC3022STA1-V MOC3023-V MOC3023M-V MOC3023S-V MOC3023STA-V MOC3023STA1-V Package 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin 6-pin DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type DIP (leads with 0.4" spacing) (lead bends for surface mount) (tape and reel packaging of type (tape and reel packaging of type Safety Standard Approval I) II) UL approved FIMKO approved SEMKO approved NEMKO approved DEMKO approved CSA approve in progress Application part number MOC3020 MOC3021 I) II) MOC3022 I) II) MOC3023 I) II) VDE approve in progress MOC3020 I) II) MOC3021 I) II) I) II) I) II) MOC3022 MOC3023 PHOTOCOUPLER Part Number 12-167 Ratings and Characteristics Absolute Maximum Ratings (Ta=25 ) Parameter Input Symbol Rating Unit Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation PD 70 mW V DRM 400 V V TSM 1 A mW Collector-Emitter Voltage Peak Repetitive Surge current Output (PW=1ms, 120pps) PC 300 P tot 330 mW V iso 5,000 Vrms Operating Temperature Topr -40~+100 Storage Temperature Tstg -55~+150 Tsol 260 Collector Power Dissipation Total Power Dissipation *1.Isolation Voltage *2.Soldering Temperature *1. AC for 1 minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 seconds Electrical / Optical Characteristics Parameter Input Symbol Forward Voltage VF Reverse Current IR *1 Peak Blocking Current, Either Direction Peak On-State Voltage, Either Output Direction *2 Critical rate of Rise of OffState Voltage *3 Led Trigger Current, Current Required to Latch Output, Either Direction Coupled (Ta=25 ) Holding Current, Either Direction Turn-On time Min. Typ. Max. Unit. 1.15 1.5 V I F =10mA A 10 Conditions V R =6V I DRM 10 100 nA V DRM=400V V TM 1.7 3 V I C=0.1mA I F =0 dv/dt 100 MOC3020 15 30 MOC3021 8 15 I FT MOC3022 10 MOC3023 5 IH ton S V/ 100 mA I E=10 I F =0 A Main Terminal Voltage = 3V A 80 200 S VD=6V, I F =20mA R L =100 *1 Test voltage must be applied within dv/dt rating. *2 This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only. *3 All devices are guaranteed to trigger at an IF value less than or equal to max. IFT. Therefore, recommended operating lF lies between max IFT and absolute max IF (50mA) 12-168 PHOTOCOUPLER Typical Electrical/Optical Characteristic Curves (25 Ambient Temperature Unless Otherwise Noted) 12-169 12-170