SGB02N60 Fast IGBT in NPT-technology C * 75% lower Eoff compared to previous generation combined with low conduction losses * Short circuit withstand time - 10 s * Designed for: - Motor controls - Inverter * NPT-Technology for 600V applications offers: - very tight parameter distribution - high ruggedness, temperature stable behaviour - parallel switching capability G E PG-TO-263-3-2 (D-PAK) (TO-263AB) 2 * Qualified according to JEDEC for target applications * Pb-free lead plating; RoHS compliant * Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Type SGB02N60 VCE IC VCE(sat)150C Tj Marking Package 600V 2A 2.2V 150C G02N60 PG-TO-263-3-2 Maximum Ratings Parameter Symbol Collector-emitter voltage VCE DC collector current IC Value 600 Unit V A TC = 25C 6.0 TC = 100C 2.9 Pulsed collector current, tp limited by Tjmax ICpul s 12 Turn off safe operating area - 12 Gate-emitter voltage VGE 20 V Avalanche energy, single pulse EAS 13 mJ tSC 10 s Ptot 30 W -55...+150 C VCE 600V, Tj 150C IC = 2 A, VCC = 50 V, RGE = 25 , start at Tj = 25C 1) Short circuit withstand time VGE = 15V, VCC 600V, Tj 150C Power dissipation TC = 25C Tj , Tstg Operating junction and storage temperature Soldering temperature (reflow soldering, MSL1) 2 1) 245 J-STD-020 and JESD-022 Allowed number of short circuits: <1000; time between short circuits: >1s. 1 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 Thermal Resistance Parameter Symbol Conditions Max. Value Unit RthJC 4.2 K/W RthJA 40 Characteristic IGBT thermal resistance, junction - case Thermal resistance, junction - ambient 1) Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Symbol Conditions Value min. Typ. max. 600 - - 1.7 1.9 2.4 T j =1 5 0 C - 2.2 2.7 3 4 5 Unit Static Characteristic Collector-emitter breakdown voltage V ( B R ) C E S V G E = 0V , I C = 5 00 A Collector-emitter saturation voltage VCE(sat) V V G E = 15 V , I C = 2 A T j =2 5 C Gate-emitter threshold voltage VGE(th) I C = 15 0 A , V C E = V G E Zero gate voltage collector current ICES V C E = 60 0 V, V G E = 0 V A T j =2 5 C - - 20 T j =1 5 0 C - - 250 Gate-emitter leakage current IGES V C E = 0V , V G E =2 0 V - - 100 nA Transconductance gfs V C E = 20 V , I C = 2 A - 1.6 - S Input capacitance Ciss V C E = 25 V , - 142 170 pF Output capacitance Coss V G E = 0V , - 18 22 Reverse transfer capacitance Crss f= 1 MH z - 10 12 Gate charge QGate V C C = 48 0 V, I C =2 A - 14 18 nC - 7 - nH - 20 - A Dynamic Characteristic V G E = 15 V LE Internal emitter inductance measured 5mm (0.197 in.) from case 2) Short circuit collector current 1) IC(SC) V G E = 15 V ,t S C 10 s V C C 6 0 0 V, T j 1 5 0 C 2 Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm (one layer, 70m thick) copper area for collector connection. PCB is vertical without blown air. 2) Allowed number of short circuits: <1000; time between short circuits: >1s. 2 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 Switching Characteristic, Inductive Load, at Tj=25 C Parameter Symbol Conditions Value min. typ. max. - 20 24 - 13 16 - 259 311 - 52 62 - 0.036 0.041 - 0.028 0.036 - 0.064 0.078 Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets T j =2 5 C , V C C = 40 0 V, I C = 2 A, V G E = 0/ 15 V , R G = 11 8 , 1) L = 18 0 nH , 1) C = 18 0 pF Energy losses include "tail" and diode reverse recovery. ns mJ Switching Characteristic, Inductive Load, at Tj=150 C Parameter Symbol Conditions Value min. typ. max. - 20 24 - 14 17 - 287 344 - 67 80 - 0.054 0.062 - 0.043 0.056 - 0.097 0.118 Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets 1) T j =1 5 0 C, V C C = 40 0 V, I C =2 A , V G E = 0/ 15 V , R G = 11 8 , 1) L = 18 0 nH , 1) C = 18 0 pF Energy losses include "tail" and diode reverse recovery. ns mJ Leakage inductance L a nd Stray capacity C due to dynamic test circuit in Figure E. 3 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 16A Ic t p =2 s 10A 14A IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 12A 10A T C =80C 8A 6A 4A 2A 0A 10Hz T C =110C 15 s 1A 50 s 200 s 0.1A 1ms DC Ic 0.01A 100Hz 1kHz 10kHz 1V 100kHz 35W 7A 30W 6A 25W 5A 20W 15W 10W 5W 0W 25C 100V 1000V VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25C, Tj 150C) IC, COLLECTOR CURRENT Ptot, POWER DISSIPATION f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj 150C, D = 0.5, VCE = 400V, VGE = 0/+15V, RG = 118) 10V 4A 3A 2A 1A 50C 75C 100C 125C TC, CASE TEMPERATURE Figure 3. Power dissipation (IGBT) as a function of case temperature (Tj 150C) 0A 25C 50C 75C 100C 125C TC, CASE TEMPERATURE Figure 4. Collector current as a function of case temperature (VGE 15V, Tj 150C) 4 http://store.iiic.cc/ Rev. 2.3 Nov 06 7A 7A 6A 6A 5A V G E =20V IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT SGB02N60 15V 4A 13V 11V 3A 9V 7V 2A 5V 1V 2V 3V 4V 13V 11V 3A 9V 2A 7V 5V 7A Tj=+25C 6A -55C +150C 5A 4A 3A 2A 1A 2V 4V 6V 8V 10V VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristics (VCE = 10V) 1V 2V 3V 4V 5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristics (Tj = 150C) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE 8A IC, COLLECTOR CURRENT 15V 4A 0A 0V 5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristics (Tj = 25C) 0A 0V V G E =20V 1A 1A 0A 0V 5A 4.0V 3.5V IC = 4A 3.0V 2.5V IC = 2A 2.0V 1.5V 1.0V -50C 0C 50C 100C 150C Tj, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V) 5 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 t d(off) tf 100ns t, SWITCHING TIMES t, SWITCHING TIMES t d(off) td(on) tf 100ns t d(on) tr 10ns 0A 1A 2A 3A tr 4A 10ns 0 5A IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, RG = 11 8, Dynamic test circuit in Figure E) 300 400 5.5V VGE(th), GATE-EMITTER THRESHOLD VOLTAGE t, SWITCHING TIMES 200 RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, IC = 2A, Dynamic test circuit in Figure E) t d(off) 100ns tf t d(on) tr 10ns 0C 100 50C 100C 150C Tj, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 2A, RG = 1 1 8, Dynamic test circuit in Figure E) 5.0V 4.5V 4.0V max. 3.5V 3.0V typ. 2.5V min. 2.0V -50C 0C 50C 100C 150C Tj, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.15mA) 6 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 0.2mJ *) Eon and Ets include losses due to diode recovery. 0.2mJ E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES *) Eon and Ets include losses due to diode recovery. E ts * E on * 0.1mJ E off E ts * 0.1mJ E on * E off 0.0mJ 0A 1A 2A 3A 4A 0.0mJ 0 5A IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, RG = 11 8, Dynamic test circuit in Figure E) 100 200 300 400 RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, Tj = 150C, VCE = 400V, VGE = 0/+15V, IC = 2A, Dynamic test circuit in Figure E) 0.2mJ D=0.5 E ts * E on * 0.1mJ E off 0.0mJ 0C 50C 100C ZthJC, TRANSIENT THERMAL IMPEDANCE E, SWITCHING ENERGY LOSSES *) Eon and Ets include losses due to diode recovery. 0 10 K/W 0.1 0.05 0.02 R,(K/W) 1.026 1.3 1.69 0.183 -1 10 K/W 0.01 , (s) 0.035 3.62*10-3 4.02*10-4 4.21*10-5 R1 R2 -2 10 K/W 150C Tj, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE = 400V, VGE = 0/+15V, IC = 2A, RG = 1 1 8, Dynamic test circuit in Figure E) 0.2 1s single pulse 10s 100s C 1 = 1 / R 1 C 2 = 2 /R 2 1m s 10m s 100m s 1s tp, PULSE WIDTH Figure 16. IGBT transient thermal impedance as a function of pulse width (D = tp / T) 7 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 25V C iss 15V 120V C, CAPACITANCE VGE, GATE-EMITTER VOLTAGE 20V 480V 10V 100pF C oss 5V 10pF C rss 0V 0nC 5nC 10nC 15nC 0V QGE, GATE CHARGE Figure 17. Typical gate charge (IC = 2A) 30V 40A IC(sc), SHORT CIRCUIT COLLECTOR CURRENT tsc, SHORT CIRCUIT WITHSTAND TIME 20V VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE = 0V, f = 1MHz) 25 s 20 s 15 s 10 s 5 s 0 s 10V 10V 11V 12V 13V 14V 15V VGE, GATE-EMITTER VOLTAGE Figure 19. Short circuit withstand time as a function of gate-emitter voltage (VCE = 600V, start at Tj = 25C) 30A 20A 10A 0A 10V 12V 14V 16V 18V 20V VGE, GATE-EMITTER VOLTAGE Figure 20. Typical short circuit collector current as a function of gate-emitter voltage (VCE 600V,Tj = 150C) 8 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 PG-TO263-3-2 9 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 1 2 r1 r2 n rn Tj (t) p(t) r1 r2 rn TC Figure D. Thermal equivalent circuit Figure A. Definition of switching times Figure B. Definition of switching losses Figure E. Dynamic test circuit Leakage inductance L =180nH an d Stray capacity C =180pF. 10 http://store.iiic.cc/ Rev. 2.3 Nov 06 SGB02N60 Edition 2006-01 Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 11/30/06. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 11 http://store.iiic.cc/ Rev. 2.3 Nov 06