593D www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Capacitors TANTAMOUNT(R), Molded Case, Low ESR FEATURES Effective September 2005, new capacitor ratings will not be added to the 593D series. All new ratings are available in the TR3 series. The TR3 series offers state-of-the-art low ESR for switch mode power supplies and DC/DC converters. * Terminations: 100 % matte tin, standard, tin/lead available * Compliant terminations * Molded case available in five case codes * Compatible with "High Volume" automatic pick and place equipment * High ripple current carrying capability * Low ESR * Meets IEC specification QC300801/US0001 and EIA535BAAC mechanical and performance requirements * Compliant to RoHS Directive 2002/95/EC * Moisture sensitivity level 1 Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE CHARACTERISTICS Capacitance Range: 0.47 F to 680 F Capacitance Tolerance: 5 %, 10 %, 20 % 100 % Surge Current Tested (C, D and E Case Sizes) Voltage Rating: 4 VDC to 50 VDC www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above + 85 C voltage derating is required) ORDERING INFORMATION 593D 107 X9 010 D 2WE3 TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C CASE CODE TERMINATION AND PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow X0 = 20 % X9 = 10 % X5 = 5 % (special order) This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V) See Ratings and Case Codes table 2TE3: Matte tin, 7" (178 mm) reel 2WE3: Matte tin, 13" (330 mm) reel 8T: Tin/lead, 7" (178 mm) reel 8W: Tin/lead, 13" (330 mm) reel Notes * We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. Effective July 15, 2008, part numbers with solderable termination codes 2T and 2W may have either matte or tin/lead terminations. Codes 2TE3 and 2WE3 specify only matte tin terminations. Codes 8T and 8W specify only tin/lead terminations. * Dry pack is available per request, contact regional marketing. DIMENSIONS in inches [millimeters] L W TW H TH (MIN.) P CASE CODE EIA SIZE A 3216-18 B 3528-21 C 6032-28 D 7343-31 E 7343-43 Revision: 13-Jan-12 L 0.126 0.008 [3.2 0.20] 0.138 0.008 [3.5 0.20] 0.236 0.012 [6.0 0.30] 0.287 0.012 [7.3 0.30] 0.287 0.012 [7.3 0.30] W 0.063 0.008 [1.6 0.20] 0.110 0.008 [2.8 0.20] 0.126 0.012 [3.2 0.30] 0.169 0.012 [4.3 0.30] 0.169 0.012 [4.3 0.30] H 0.063 0.008 [1.6 0.20] 0.075 0.008 [1.9 0.20] 0.098 0.012 [2.5 0.30] 0.110 0.012 [2.8 0.30] 0.157 0.012 [4.0 0.30] P 0.031 0.012 [0.80 0.30] 0.031 0.012 [0.80 0.30] 0.051 0.012 [1.3 0.30] 0.051 0.012 [1.3 0.30] 0.051 0.012 [1.3 0.30] TW 0.047 0.004 [1.2 0.10] 0.087 0.004 [2.2 0.10] 0.087 0.004 [2.2 0.10] 0.094 0.004 [2.4 0.10] 0.094 0.004 [2.4 0.10] TH (MIN.) 0.028 [0.70] 0.028 [0.70] 0.039 [1.0] 0.039 [1.0] 0.039 [1.0] Document Number: 40005 55 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 593D www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 0.47 50 V A 0.68 A 1.0 A 1.5 2.2 3.3 A A/B B/C A B/C B/C A A/B B/C C/D A A B C C/D 4.7 A A/B A/B B/C C D/E 6.8 A A B C C/D D/E A A/B/C B/C C C/D D/E 10 A 15 A A A/B B/C B/C C/D D/E 22 A A/B A/B/C B/C C/D D D/E 33 A/B A/B B/C B/C/D C/D D/E 47 A/B B/C B/C/D C/D D/E E 68 B/C B/C C/D D D/E 100 B/C B/C/D C/D D/E E 150 B/C/D C/D/E D/E E 220 C/D D/E D/E 330 D D/E E 470 D/E E 680 E MARKING "A" CASE VOLTAGE CODE Capacitance Code, pF Indicates Lead (Pb)-free V 104L Voltage Code Polarity Band A Case VOLTS CODE 4.0 G 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T Voltage Capacitance F Indicates Lead (Pb)-free 22 10L XX 2 Polarity Band Data Code Vishay Sprague Logo B, C, D, E Cases Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. "A" Case capacitors use a letter code for the voltage and EIA capacitance code. The Vishay Sprague(R) trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Capacitors might bear a slightly different marking than the one shown above. For example, rating 22 F 10 V could be marked either as 22-10L or 22R10. Call the factory for further explanation. Revision: 13-Jan-12 Document Number: 40005 56 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 593D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE 15 22 33 33 47 47 68 68 100 100 150 150 150 220 220 330 470 470 680 A A A B A B B C B C B C D C D D D E E 10 15 22 22 33 33 47 47 68 68 100 100 100 150 150 150 220 220 330 330 470 A A A B A B B C B C B C D C D E D E D E E 4.7 6.8 10 15 15 22 22 22 A A A A B A B C PART NUMBER MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 14 6 6 6 8 6 14 12 8 8 8 8 10 10 12 1.500 1.500 1.500 0.500 0.800 0.500 0.500 0.275 0.450 0.225 0.500 0.250 0.150 0.200 0.150 0.150 0.125 0.100 0.100 0.22 0.22 0.22 0.41 0.31 0.41 0.41 0.63 0.43 0.66 0.41 0.66 1.00 0.74 1.00 1.00 1.10 1.28 1.28 6 6 6 6 14 6 6 6 6 6 15 6 6 8 8 8 8 8 8 8 10 2.000 2.000 2.000 0.600 0.800 0.600 0.550 0.300 0.550 0.275 0.500 0.250 0.140 0.200 0.125 0.100 0.100 0.100 0.125 0.100 0.100 0.19 0.19 0.19 0.38 0.31 0.38 0.39 0.61 0.39 0.63 0.41 0.66 1.04 0.74 1.10 1.28 1.22 1.28 1.10 1.28 1.28 6 6 6 6 6 8 6 6 3.000 3.000 2.000 2.000 0.700 1.500 0.700 0.345 0.16 0.16 0.19 0.19 0.35 0.22 0.35 0.56 MAX. DF AT + 25 C 120 Hz (%) 4 VDC AT + 85 C; 2.7 VDC AT + 125 C 593D156(1)004A(2) 0.6 593D226(1)004A(2) 0.9 593D336(1)004A(2) 1.3 593D336(1)004B(2) 1.3 593D476(1)004A(2) 1.9 593D476(1)004B(2) 1.9 593D686(1)004B(2) 2.7 593D686(1)004C(2) 2.7 593D107(1)004B(2) 4.0 593D107(1)004C(2) 4.0 593D157(1)004B(2) 6.0 593D157(1)004C(2) 6.0 593D157(1)004D(2) 6.0 593D227(1)004C(2) 8.8 593D227(1)004D(2) 8.8 593D337(1)004D(2) 13.2 593D477(1)004D(2) 18.8 593D477(1)004E(2) 18.8 593D687(1)004E(2) 27.2 6.3 VDC AT + 85 C; 4 VDC AT 125 C 593D106(1)6R3A(2) 0.6 593D156(1)6R3A(2) 0.9 593D226(1)6R3A(2) 1.3 593D226(1)6R3B(2) 1.3 593D336(1)6R3A(2) 2.0 593D336(1)6R3B(2) 2.0 593D476(1)6R3B(2) 2.8 593D476(1)6R3C(2) 2.8 593D686(1)6R3B(2) 4.1 593D686(1)6R3C(2) 4.1 593D107(1)6R3B(2) 6.0 593D107(1)6R3C(2) 6.0 593D107(1)6R3D(2) 6.0 593D157(1)6R3C(2) 9.0 593D157(1)6R3D(2) 9.0 593D157(1)6R3E(2) 9.0 593D227(1)6R3D(2) 13.2 593D227(1)6R3E(2) 13.2 593D337(1)6R3D(2) 19.8 593D337(1)6R3E(2) 19.8 593D477(1)6R3E(2) 28.2 10 VDC AT + 85 C; 7 VDC AT 125 C 593D475(1)010A(2) 0.5 593D685(1)010A(2) 0.7 593D106(1)010A(2) 1.0 593D156(1)010A(2) 1.5 593D156(1)010B(2) 1.5 593D226(1)010A(2) 2.2 593D226(1)010B(2) 2.2 593D226(1)010C(2) 2.2 Note * Part number definitions: (1) Tolerance: X0, X9, X5 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W Revision: 13-Jan-12 Document Number: 40005 57 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 593D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE 33 33 47 47 47 68 68 100 100 150 150 220 220 330 B C B C D C D C D D E D E E 3.3 4.7 4.7 6.8 10 10 10 15 15 22 22 33 33 33 47 47 68 100 100 150 A A B A A B C B C B C B C D C D D D E E 1.0 2.2 3.3 4.7 4.7 6.8 10 10 15 15 22 22 33 33 47 47 68 68 100 A A A A B B B C B C C D C D D E D E E PART NUMBER MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 8 6 8 8 8 8 10 0.600 0.300 0.600 0.300 0.200 0.275 0.150 0.200 0.100 0.100 0.100 0.125 0.100 0.100 0.38 0.61 0.38 0.61 0.87 0.63 1.00 0.74 1.22 1.22 1.28 1.10 1.28 1.28 6 6 6 6 6 6 6 6 6 6 6 6 6 4 6 6 6 8 8 8 3.500 2.500 1.500 3.000 1.700 0.800 0.450 0.800 0.400 0.700 0.350 0.700 0.300 0.225 0.300 0.150 0.150 0.125 0.100 0.100 0.15 0.17 0.24 0.16 0.21 0.33 0.49 0.33 0.52 0.35 0.56 0.35 0.61 0.82 0.61 1.00 1.00 1.10 1.28 1.28 4 6 6 6 6 6 6 6 6 6 6 4 6 6 6 4 6 6 8 5.500 4.000 4.000 3.500 1.000 1.000 1.000 0.450 1.000 0.400 0.375 0.225 0.350 0.200 0.200 0.150 0.175 0.150 0.150 0.12 0.14 0.14 0.15 0.29 0.29 0.29 0.49 0.29 0.52 0.54 0.82 0.56 0.87 0.87 1.05 0.93 1.05 1.05 MAX. DF AT + 25 C 120 Hz (%) 10 VDC AT + 85 C; 7 VDC AT 125 C 593D336(1)010B(2) 3.3 593D336(1)010C(2) 3.3 593D476(1)010B(2) 4.7 593D476(1)010C(2) 4.7 593D476(1)010D(2) 4.7 593D686(1)010C(2) 6.8 593D686(1)010D(2) 6.8 593D107(1)010C(2) 10.0 593D107(1)010D(2) 10.0 593D157(1)010D(2) 15.0 593D157(1)010E(2) 15.0 593D227(1)010D(2) 22.0 593D227(1)010E(2) 22.0 593D337(1)010E(2) 33.0 16 VDC AT + 85 C; 10 VDC AT + 125 C 593D335(1)016A(2) 0.5 593D475(1)016A(2) 0.8 593D475(1)016B(2) 0.8 593D685(1)016A(2) 1.1 593D106(1)016A(2) 1.6 593D106(1)016B(2) 1.6 593D106(1)016C(2) 1.6 593D156(1)016B(2) 2.4 593D156(1)016C(2) 2.4 593D226(1)016B(2) 3.5 593D226(1)016C(2) 3.5 593D336(1)016B(2) 5.3 593D336(1)016C(2) 5.3 593D336(1)016D(2) 4.2 593D476(1)016C(2) 7.5 593D476(1)016D(2) 7.5 593D686(1)016D(2) 10.9 593D107(1)016D(2) 16.0 593D107(1)016E(2) 16.0 593D157(1)016E(2) 24.0 20 VDC AT + 85 C; 13 VDC AT + 125 C 593D105(1)020A(2) 0.5 593D225(1)020A(2) 0.5 593D335(1)020A(2) 0.7 593D475(1)020A(2) 0.9 593D475(1)020B(2) 0.9 593D685(1)020B(2) 1.4 593D106(1)020B(2) 2.0 593D106(1)020C(2) 2.0 593D156(1)020B(2) 3.0 593D156(1)020C(2) 3.0 593D226(1)020C(2) 4.4 593D226(1)020D(2) 3.5 593D336(1)020C(2) 6.6 593D336(1)020D(2) 6.6 593D476(1)020D(2) 9.4 593D476(1)020E(2) 7.5 593D686(1)020D(2) 13.6 593D686(1)020E(2) 13.6 593D107(1)020E(2) 20.0 Note * Part number definitions: (1) Tolerance: X0, X9, X5 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W Revision: 13-Jan-12 Document Number: 40005 58 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 593D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE 1.0 1.5 2.2 2.2 3.3 4.7 4.7 6.8 10 15 15 22 33 33 47 A A A B B B C C C C D D D E E 0.47 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 4.7 6.8 6.8 10 10 15 15 22 22 A A A B B C B C C C C D C D D E D E 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 B C B C C D C D D E D E D E PART NUMBER MAX. DC LEAKAGE AT + 25 C (A) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4.000 4.000 4.000 1.500 1.500 1.500 0.525 0.500 0.450 0.425 0.250 0.200 0.200 0.200 0.200 0.14 0.14 0.14 0.24 0.24 0.24 0.46 0.47 0.49 0.51 0.77 0.87 0.87 0.91 0.91 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4.000 4.000 4.000 2.000 2.000 0.900 2.000 0.900 0.700 0.500 0.475 0.300 0.450 0.300 0.300 0.300 0.300 0.275 0.14 0.14 0.14 0.21 0.21 0.35 0.21 0.40 0.45 0.47 0.48 0.71 0.49 0.71 0.71 0.74 0.71 0.77 4 4 6 6 6 6 6 6 6 6 6 6 6 6 2.000 1.600 2.000 1.500 1.500 0.800 1.500 0.800 0.600 0.600 0.600 0.550 0.550 0.550 0.21 0.26 0.21 0.27 0.27 0.43 0.27 0.43 0.50 0.50 0.50 0.55 0.52 0.55 MAX. DF AT + 25 C 120 Hz (%) 25 VDC AT + 85 C; 17 VDC AT + 125 C 593D105(1)025A(2) 0.5 593D155(1)025A(2) 0.5 593D225(1)025A(2) 0.6 593D225(1)025B(2) 0.6 593D335(1)025B(2) 0.8 593D475(1)025B(2) 1.2 593D475(1)025C(2) 1.2 593D685(1)025C(2) 1.7 593D106(1)025C(2) 2.5 593D156(1)025C(2) 3.8 593D156(1)025D(2) 3.8 593D226(1)025D(2) 5.5 593D336(1)025D(2) 8.3 593D336(1)025E(2) 8.3 593D476(1)025E(2) 11.8 35 VDC AT + 85 C; 23 VDC AT + 125 C 593D474(1)035A(2) 0.5 593D684(1)035A(2) 0.5 593D105(1)035A(2) 0.5 593D105(1)035B(2) 0.5 593D155(1)035B(2) 0.5 593D155(1)035C(2) 0.5 593D225(1)035B(2) 0.8 593D225(1)035C(2) 0.8 593D335(1)035C(2) 1.2 593D475(1)035C(2) 1.6 593D685(1)035C(2) 2.4 593D685(1)035D(2) 2.4 593D106(1)035C(2) 3.5 593D106(1)035D(2) 3.5 593D156(1)035D(2) 5.3 593D156(1)035E(2) 5.3 593D226(1)035D(2) 7.7 593D226(1)035E(2) 7.7 50 VDC AT + 85 C; 33 VDC AT + 125 C 593D105(1)050B(2) 0.5 593D105(1)050C(2) 0.5 593D155(1)050B(2) 0.8 593D155(1)050C(2) 0.8 593D225(1)050C(2) 1.1 593D225(1)050D(2) 1.1 593D335(1)050C(2) 1.7 593D335(1)050D(2) 1.7 593D475(1)050D(2) 2.4 593D475(1)050E(2) 1.9 593D685(1)050D(2) 3.4 593D685(1)050E(2) 3.4 593D106(1)050D(2) 5.0 593D106(1)050E(2) 5.0 Note * Part number definitions: (1) Tolerance: X0, X9, X5 (2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W Revision: 13-Jan-12 Document Number: 40005 59 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 593D www.vishay.com Vishay Sprague RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating 4.0 6.3 10 16 20 25 35 50 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Capacitor Voltage Rating 4.0 6.3 10 16 20 25 35 50 Operating Voltage 2.5 3.6 6.0 10 12 15 24 28 Operating Voltage 2.5 3.3 5.0 8.0 10 12 15 24 POWER DISSIPATION CASE CODE A B C D E MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 C (W) IN FREE AIR 0.075 0.085 0.110 0.150 0.165 STANDARD PACKAGING QUANTITY CASE CODE A B C D E PRODUCT INFORMATION Guide for Molded Tantalum Capacitors Pad Dimensions Packaging Dimensions Moisture Sensitivity SELECTOR GUIDES Solid Tantalum Selector Guide Solid Tantalum Chip Capacitors FAQ Frequently Asked Questions Revision: 13-Jan-12 UNITS PER REEL 7" REEL 2000 2000 500 500 400 13" REEL 9000 8000 3000 2500 1500 www.vishay.com/doc?40074 www.vishay.com/doc?40135 www.vishay.com/doc?49053 www.vishay.com/doc?40091 www.vishay.com/doc?40110 Document Number: 40005 60 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000