5.0mm x 3.2mm SMD Crystal C5BQ (former FQ5032B) DATASHEET Page 1 of 2 * Tolerances down to 20 PPM * Stabilities down to 10 PPM * C5BQ STANDARD SPECIFICATIONS PARAMETERS Frequency Range (Fo) Frequency Tolerance @ 25C Frequency Stability, ref @ 25C Over Operating Temp Range Temperature Range (TOPR) Operating (TSTG) Storage Shunt Capacitance (Co) Load Capacitance (CL) MAX(unless otherwise noted) 8.000 ~ 48.000 MHz (See options on page 2) Drive Level Aging per year Termination Finish Seal Method Lead (Pb) Free RoHS Compliant 0.5 mW 5 PPM Ag Resin Yes Yes Frequency Range (MHz) 8.000000 ~ 11.999999 12.000000 ~ 16.000 16.000001 ~ 48.000 (See options below) (See options below) -40C ~ +85C 5 pF (See options on page 2) Operating Mode Fundamental Fundamental Fundamental Max ESR 100 80 50 All dimensions are in millimeters. Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. * Available Operating Temperatures and Stabilities* Stability Temperature 10 PPM 15 PPM 20 PPM 25 PPM O O O O 0 ~+70C O O O O -20 ~+70C X X X X -40 ~+85C Key: O=Available, X=Not Available, =Consult Fox Technical Support *Does not imply a stocked part. (c) Copyright 2019 Fox Electronics. All rights reserved 30 PPM 50 PPM O O O O O O Title / Description: C5BQ SERIES STANDARD SPECIFICATIONS Drawing Number: 101146 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 04/16/2019 5.0mm x 3.2mm SMD Crystal C5BQ (former FQ5032B) DATASHEET Page 2 of 2 * REEL SPECIFICATIONS (millimeters) * TAPE SPECIFICATIONS (millimeters) B 4.0 A 1.5 C 8.0 D 5.5 E 12.0 F 1.5 STD Reel QTY -T1 = 1,000 G 2.0 H 13 I 21 J K 62 180 L 13.5 M 2.0 Available Options & Part Identification for SMD Crystal C5BQ1 F C5BQ C C M C 25.0 F C5BQ C C M C 25.0 FOX Model Number Tolerance B=50ppm C=30ppm D=25ppm E=20ppm Stability B=50ppm C=30ppm D=25ppm E=20ppm F=15ppm H=10ppm Load Capacitance2 V=7pF D=8pF E=10pF G=12pF K=16pF M=20pF Operating Temperature C=0 to +70C F=-20 to +70C M=-40 to +85C Frequency (MHz) 1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. Listed load capacitances represent the most commonly used. Other load capacitances are available. Contact Fox Technical Support for assistance 2 Corporate Headquarters 5570 Enterprise Parkway Fort Myers, FL 33905 http://www.FOXONLINE.com Sales 1-888-GET-2-FOX (1-888-438-2369) or 1-239-693-0099 http://www.FOXONLINE.com/repdisty Tech Support http://www.FOXONLINE.com/email PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics. Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html . (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: C5BQ SERIES STANDARD SPECIFICATIONS Drawing Number: 101146 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 04/16/2019