5.0mm x 3.2mm SMD Crystal C5BQ
(former FQ5032B)
DATASHEET
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description: C5BQ SERIES STANDARD SPECIFICATIONS
Drawing Number: 101146 Size:
A
Part Number: Cage: 61429
Draftsperson: BEC Approved: MAJ Revision Date:
04/16/2019
• C5BQ STANDARD SPECIFICATIONS
PARAMETERSMAX(unless otherwise noted)
Frequency Range (Fo) 8.000 ~ 48.000 MHz
Frequency Tolerance @ 25ºC (See options on page 2)
Frequency Stability, ref @ 25ºC
Over Operating Temp Range
(
See o
p
tions below
)
Temperature Range
Operating
Storage
(TOPR)
(TSTG)
(See options below)
-40ºC ~ +85ºC
Shunt Ca
p
acitance
(
Co
)
5
p
F
Load Capacitance (CL) (See options on page 2)
Drive Level 0.5 mW
Ag
in
g
p
er
y
ear ±5 PPM
Termination Finish
Ag
Seal Method Resin
Lead
(
Pb
)
Free Yes
RoHS Com
p
liant Yes
• Available Operating Temperatures and Stabilities*
Stability Temperature ±10 PPM ±15 PPM ±20 PPM ±25 PPM ±30 PPM ±50 PPM
0 ~+70ºC O O OO O O
-20 ~+70ºC O O OO OO
-40 ~+85ºC X X XX OO
Key: O=Available, X=Not Available, ∆=Consult Fox Technical Support
*Does not imply a stocked part.
Frequency Range
(
MHz
)
Operating Mode Max ESR
8.000000 ~ 11.999999 Fundamental 100
12.000000 ~ 16.000 Fundamental 80
16.000001 ~ 48.000 Fundamental 50
All dimensions are in millimeters.
•
Tolerances down to 20 PPM
•
Stabilities down to 10 PPM
Page 1 of 2
Note: Dimensional drawing is for reference to critical specifications
defined by size measurements. Certain non-critical visual attributes,
such as side castellations, etc. may vary.
5.0mm x 3.2mm SMD Crystal C5BQ
(former FQ5032B)
DATASHEET
© Copyright 2019 Fox Electronics. All rights reserved
Title / Description: C5BQ SERIES STANDARD SPECIFICATIONS
Drawing Number: 101146 Size:
A
Part Number: Cage: 61429
Draftsperson: BEC Approved: MAJ Revision Date:
04/16/2019
• TAPE SPECIFICATIONS (millimeters)
A B C D E F STD Reel QTY
1.5 4.0 8.0 5.5 12.0 1.5 -T1 = 1,000
• REEL SPECIFICATIONS (millimeters)
G H I J K L M
2.0
13
21 62 180 13.5 2.0
Corporate
Headquarters
5570 Enterprise Parkway
Fort Myers, FL 33905
http://www.FOXONLINE.com
Sales
1-888-GET-2-FOX (1-888-438-2369) or
1-239-693-0099
http://www.FOXONLINE.com/repdisty
Tech Support
http://www.FOXONLINE.com/email
PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion.
All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the
operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer
products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of
others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties.
Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the
failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics
product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics.
Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and
service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third party owners.
For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html .
Page 2 of 2
Available
O
ptions
&
Part
I
dentification for SMD Crystal C5BQ
1
F C5BQ C C M C 25.0
F C5BQ C C M C 25.0
FOX Model
Number
Tolerance
B=50ppm
C=30ppm
D=25ppm
E=20ppm
Stability
B=50ppm
C=30ppm
D=25ppm
E=20ppm
F=15ppm
H=10ppm
Load
Capacitance2
V=7pF
D=8pF
E=10pF
G=12pF
K=16pF
M=20pF
Operating
Temperature
C=0 to +70C
F=-20 to +70C
M=-40 to +85C
Frequency
(MHz)
1 Not all frequency, tolerance, stability, load, and operating temperature combinations may be available.
2 Listed load capacitances represent the most commonly used. Other load capacitances are available.
Contact Fox Technical Support for assistance
