Model 416 Miniature Surface Mount Crystal Features Hermetic Ceramic Surface Mount Package Fundamental Crystal Design Frequency Range 24 - 80MHz Frequency Tolerance, 20ppm Standard Frequency Stability, 20ppm Standard Operating Temperature Range to -40C to +85C Tape and Reel Packaging, EIA-418 Part Dimensions: 1.6 x 1.2 x 0.45mm * 2.51054mg Applications Wearable and Handheld Electronics Wireless Communications FPGA/Microcontrollers Computer Peripherals USB Interfaces Measuring Equipment Consumer Electronics High Density Board Layouts Description CTS Model 416 incorporates a high Q quartz resonator and is ideal for supporting a wide range of commercial and industrial applications. Ordering Information Model 416 Mode of Oscillation F Frequency Code [MHz] XXX Mode Code Fundamental F Tolerance @ +25C 3 Code 1 X 2 Y 3 Code Frequency Product Frequency Code 1 Temperature Stability 5 Tolerance 10ppm 15ppm 20ppm 25ppm 30ppm Temperature Range C Code A C D I Code 1 X 2 Y 3 5 Stability 10ppm 2 15ppm 20ppm 25ppm 30ppm 50ppm Load Capacitance D Temp. Range -10C to +60C -20C to +70C -30C to +85C -40C to +85C Packaging R Packing Code 3k pcs./reel R Code Capacitance Code Capacitance W L 5pF 12pF 16pF 6pF T C 7pF 18pF V D 8pF 20pF K E 9pF Series J S 10pF A Notes: 1] Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz. 2] Check factory availability when combined with -40C to +85C temperature range. Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification. DOC# 008-0331-0 Rev. E Page 1 of 4 (c)2017 CTS(R) Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model 416 Miniature Surface Mount Crystal Electrical Specifications Operating Conditions P ARAMETER SYMBO L CO NDITIO NS MIN TYP -10 O perating Temperature TA - -20 -30 TSTG - -40 SYMBO L CO NDITIO NS MIN UNIT +60 +25 -40 Storage Temperature MAX +70 +85 C +85 - +90 C TYP MAX UNIT Frequency Stability P ARAMETER Frequenc y Range Frequenc y Toleranc e fO f/fO - 24 - 80 MHz @ +25C 10, 15, 20, 25 or 30 ppm 10, 15, 20, 25, 30 or 50 ppm Frequenc y Stability f/f25 Referenced to +25C reading Aging f/f0 Typical per year @ +25C - 3 - ppm SYMBO L CO NDITIO NS MIN TYP MAX UNIT O perating Mode - - Fundamental - Crystal Cut - - AT-Cut Strip - Load Capac itanc e CL - See Ordering Information pF Shunt Capac itanc e C0 - - 3.0 5.0 pF 24MHz - <30MHz - - 120 30MHz - <37MHz - - 80 37MHz - <80MHz - - 60 Crystal Parameters P ARAMETER Series Resistanc e Fundamental R1 Drive Level DL - - 10 200 W Insulation Resistanc e Ri +100Vdc 15Vdc 500 - - M f/f 0 - Frequency deviation referenced to nominal frequency. f/f 25 - Frequency deviation referenced to +25C frequency. DOC# 008-0331-0 Rev. E Page 2 of 4 (c)2017 CTS(R) Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model 416 Miniature Surface Mount Crystal Mechanical Specifications Package Drawing Marking Information Format A - 2 Lines [Preferred] M416 DXXX M416 DXXX 1. M416 - CTS Model series. 2. D - Date code. See Table I for codes. 3. XXX - Frequency code, 3-digits frequencies below 100MHz. [See document 016-1454-0, Frequency Code Tables]. Format B - 1 Line [Acceptable] XXXYWW 1. XXX - XXX - Frequency code, 3-digits frequencies below 100MHz. [See document 016-1454-0, Frequency Code Tables]. 2. YWW - Date code; Y = year [last digit], WW = week. Recommended Pad Layout Notes 1. Terminations #2, #4 and metal lid are connected internally. End user may connect these pins to circuit ground for EMI suppression. 2. JEDEC termination code (e4). Barrier-plating is nickel [Ni] with gold [Au] flash plate. 2. Reflow conditions per JEDEC J-STD-020; +260C maximum, 20 seconds. 3. MSL = 1. Table I - Date Code MO NTH 2001 2002 2003 2004 YEAR 2005 2009 2006 2010 2007 2011 2008 2012 2013 2014 2015 2016 DOC# 008-0331-0 Rev. E 2017 2018 2019 2020 JAN FEB MAR AP R MAY JUN JUL AUG SEP O CT NO V DEC A N a n B P b p C Q c q D R d r E S e s F T f t G U g u H V h v J W j w K X k x L Y l y M Z m z Page 3 of 4 (c)2017 CTS(R) Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model 416 Miniature Surface Mount Crystal Packaging - Tape and Reel Tape Drawing Reel Drawing Notes 1. Device quantity is 3k pieces maximum per 180mm reel. 2. Complete CTS part number, frequency value, date code and manufacturing site code information must appear on reel and carton labels. DOC# 008-0331-0 Rev. E Page 4 of 4 (c)2017 CTS(R) Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.