MCC TM Micro Commercial Components HER301 Thru HER308 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) x Low forward voltage drop x High reliability and High surge current capability * Epoxy meets UL 94 V-0 flammability rating * Moisture Sensitivity Level 1 * Halogen free available upon request by adding suffix "-HF" 3.0 Amp High Efficient Rectifiers 50 to 1000 Volts Maximum Ratings x x x Operating Temperature: -55 to +150 Storage Temperature: -55 to +150 Typical Thermal Resistance: 30/W Junction To Lead MCC Part Number HER301 HER302 HER303 HER304 HER305 HER306 HER307 HER308 Device Marking HER301 HER302 HER303 HER304 HER305 HER306 HER307 HER308 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 300V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 210V 280V 420V 560V 700V DO-201AD Maximum DC Blocking Voltage 50V 100V 200V 300V 400V 600V 800V 1000V D A Cathode Mark B D Electrical Characteristics @ 25 Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage HER301-HER304 HER305 HER306-HER308 Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time HER301-HER305 HER306-HER308 Typical Junction Capacitance HER301-HER305 HER306-HER308 IF(AV) 3.0A TA = 55 IFSM 150A 8.3ms, half sine VF IR Trr CJ 1.0V 1.3V 1.7V 10uA 200uA 50ns 75ns 80pF 50pF C IFM = 3.0A; TA = 25 DIMENSIONS TA = 25 TA = 100 DIM A B C D INCHES MIN .287 .189 .048 1.000 MAX .374 .208 .052 --- MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --- NOTE IF=0.5A, IR=1.0A IRR=0.25A Measured at 1.0MHz, VR=4.0V Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: B www.mccsemi.com 1 of 3 2013/01/01 MCC HER301 THRU HER308 Micro Commercial Components RATINGS AND CHARACTERISTIC CURVES FIG.2- MAXIMUM AVERAGE FORWARD CURRENT DERATING FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 10W NONINDUCTIVE trr AVERAGE FORWARD CURRENT. (A) 50W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) -1.0A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms 1cm 2 1 25 50 75 100 125 150 175 O AMBIENT TEMPERATURE. ( C) 1.0 20 40 60 80 100 30 ER ~H 01 HE R3 05 06 ~H ER 30 8 R3 1.0 .1 .01 120 4 Tj=25 0C 10.0 HE Tj=25 0C 10 0.1 .4 .6 .8 1.0 FORWARD VOLTAGE. (V) .2 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1.2 1.4 FIG.6- TYPICAL JUNCTION CAPACITANCE FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 JUNCTION CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 3 HE R3 INSTANTANEOUS FORWARD CURRENT. (A) Tj=100 0C 100 200 100 150 125 HE 100 HE R3 75 R3 01 ~H 06~ HE ER R3 50 30 5 08 25 0 0 1 10 100 1000 .1 NUMBER OF CYCLES AT 60Hz Revision: B 4 100.0 1000 300 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 5 FIG.5- TYPICAL FORWARD CHARACTERISTICS FIG.3- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT. ( A) SET TIME BASE FOR 5/ 10ns/ cm 6 .5 1 2 5 10 20 50 100 200 500 REVERSE VOLTAGE. (V) www.mccsemi.com 2 of 3 2013/01/01 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 1.2Kpcs/Reel Part Number-AP Ammo Packing: 1.2Kpcs/Ammo Box Part Number-BP Bulk: 12Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: B www.mccsemi.com 3 of 3 2013/01/01 3