172DIP PCB Mount Miniature Reed Relay/SPDT and DPDT 0.25 Amp Rated Can Sustain Lead-Free Re-flow for Pin-Thru-Paste Assembly Can Survive High Shock to Avoid Damage in Harsh Conditions Sealed Construction in Standard 0.10 Inch on Center Pin Configuration RoHS Compliant General Specifications Contact Characteristics Number and type of Contacts Contact materials Current rating Switching voltage Units ~ Minimum Switching Requirement Minimum Coil Characteristics Voltage Range Operating Range Average consumption Drop-out voltage threshold % of Nominal Performance Characteristics Electrical Life Mechanical Life Operating time (response time) Rated insulation voltage Dielectric strength rms voltage Environment Ambient air temperature around the device Vibration resistance Shock resistance Weight 172DIP SPDT Rhodium 0.25 60 100 10 172DIP DPDT Rhodium 0.25 60 100 10 5....24 80% to 110% 0.29 10% 5....24 80% to 110% 0.29 10% ms V V V 50,000,000 100,000,000 1 1000 1000 200 50,000,000 100,000,000 1 1000 1000 200 C C g-n g-n grams -40...+85 -40...+55 20, 10-200 Hz 50 1 -40...+85 -40...+55 20, 10-200 Hz 50 1 A V V mA V W Operations @ Rated Current (Resistive) Unpowered ~ ~ ~ Between coil and contact Between poles Between contacts Storage Operation Operational 172DIP SPDT 0.79 MAX (20.14) 0.03 (0.64) SECTION 8 0.02 (0.51) 8/12 Circuit Board Pin Spacing 172DIP DPDT 0.29 MAX (7.37) 0.8 MAX (20.32) 0.6 (15.24) 0.12 (3) 0.38 (9.65) WHEN SPACING DIP RELAYS, THE RELAYS REQUIRE 1/2 INCH SPACING FROM THE SIDE OF THE ADJACENT RELAYS 8 14 0.3 MAX (7.62) 0.4 (10.2) Viewed from component side 0.4 MAX (10.2) 0.4 MAX (10.2) 0.01 (0.25) 0.1 (2.5) 0.12 (3) 0.6 (15.24) 1 0.025 (0.64) 0.08 (2.09) 7 0.05 (1.2) 0.3 0.003 (7.62) DRAWINGS AND PIN SPACING ENLARGED TO 200% OF ACTUAL SIZE Magnecraft Solution Guide 105A 0.1 IN GR (2.54 MM www.magnecraft.com Standard Part Numbers Nominal Input Voltage 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC Nominal Coil Resistance () 200 1000 2200 200 1000 2200 BOLD-FACED Part Number W172DIP-1 W172DIP-3 W172DIP-4 W172DIP-5 W172DIP-7 W172DIP-8 847-441-2540 PART NUMBERS ARE NORMALLY STOCKED Contact Configuration Figure SPDT A SPDT A SPDT A SPDT w/ Clamping Diode B SPDT w/ Clamping Diode B SPDT w/ Clamping Diode B 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC 200 1000 2200 200 1000 2200 W172DIP-31 W172DIP-33 W172DIP-34 W172DIP-35 W172DIP-37 W172DIP-38 SPDT SPDT SPDT SPDT w/ Clamping Diode SPDT w/ Clamping Diode SPDT w/ Clamping Diode C C C D D D 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC 200 1000 3200 200 1000 3200 W172DIP-141 W172DIP-145 W172DIP-146 W172DIP-147 W172DIP-149 W172DIP-150 SPDT SPDT SPDT SPDT w/ Clamping Diode SPDT w/ Clamping Diode SPDT w/ Clamping Diode E E E F F F 5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC 46 266 1066 46 266 1066 W172DIP-17 W172DIP-19 W172DIP-20 W172DIP-21 W172DIP-23 W172DIP-24 DPDT DPDT DPDT DPDT w/ Clamping Diode DPDT w/ Clamping Diode DPDT w/ Clamping Diode G G G H H H WIRING DIAGRAMS TOP VIEW 14 13 9 8 14 13 9 8 14 13 9 8 1 2 6 7 14 13 9 8 CIRCUIT PIN Spacing SPACING Circuit BOARD Board Pin VIEWED SIDE ViewedFROM fromCOMPONENT component side (TOP VIEW) 1 2 6 0.1 IN GRID (2.54 MM)Figure A 7 SPDT WITHOUT DIODE 1 14 13 9 8 1 2 6 7 1 2(+) (-)6 7 Figure B SPDT WITH DIODE 14 13 9 8 Figure C SPDT WITHOUT DIODE 14 13 9 8 1 2 6 7 1 2(+) (-)6 7 Figure D SPDT WITH DIODE 14 13 (-)9 8 7 0.1 IN GRID (2.54) MM) Magnecraft Solution Guide 105A Figure E SPDT WITHOUT DIODE 1 2(+) (-)6 7 Figure F SPDT WITH DIODE Figure G DPDT WITHOUT DIODE 1 2(+) 6 7 Figure H DPDT WITH DIODE SECTION 8 8 14 8/13