CURRENT 25.0 Amperes VOLTAGE 50 to 1000 Volts KBPC25005/W THRU KBPC2510/W Features * Diffused Junction * Low Reverse Leakage Current * Low Power Loss, High Efficiency * Surge Overload Rating to 400A Peak * Electrically Isolated Metal Case for Maximum Heat Dissipation * High Case Dielectric Strength of 1500VRMS K B PC K B P C -W H H B N E M L A A C H P H (AC) (+) (AC) (+) J C Mechanical Data A P K (AC) (-) (-) (AC) G * Case : High Conductivity Metal * Terminals : Plated Leads Solderable per MIL-STD-202, Method 208 * Polarity : Symbols Marked on Case * Mounting : Through Hole for #10 Screw * Mounting Torque : 8.0 Inch-pounds Maximum * Weight : KBPC 31.6 grams (approx.) KBPC-W 28.5 grams (approx.) * Mounting Position : Any * Marking : Type Number Dim A B C E G H K B P C / K B P C -W Min Max Dim Min J 28.40 28.70 17.10 10.40 10.97 11.23 K 15.50 17.60 0.97 O/ L M 22.86 25.40 30.50 N 13.30 15.30 10.97 P Hole for #10 s crew 17.10 4.85 O/ 5.59 O/ A ll Dimens ions in mm Max 19.10 12.40 1.07 O/ 11.23 19.10 "W" S uffix Des ignates Wire Leads No S uffix Des ignates F as t-on T erminals Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols Peak Repetitive Reverse voltage Working Peak Reverse voltage DC Blocking voltage RMS Reverse voltage KBPC25 KBPC25 KBPC25 KBPC25 KBPC25 KBPC25 KBPC25 005/W 01/W 02/W 04/W 06/W 08/W 10/W Units VRMM VRWM VR 50 100 200 400 600 800 1000 Volts VR(RMS) 35 70 140 280 420 560 700 Volts Io 25 Amps Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) IFSM 400 Amps Forward voltage (per element) @ IF=12.5 A VFM 1.2 Volts Peak Reverse Current at Rated DC Blocking voltage @ TC=25 Average Rectified Output Current @ TC=55 @ TC=125 IR 10 A 1.0 mA I2t Rating for Fusing (t<8.3ms) (Note 2) I2t 373 A2S Typical Junction Capacitance (Note 3) Cj 300 pF Typical Thermal Resistance Junction to Case RJA 3.8 /W Operating and Storage Temperature Range Tj TSTG -65 to +150 Notes: (1) Thermal resistance junction to case mounted on heat sink. (2) Measured at non-repetitive, for t > 1.0ms and < 8.3ms. (3) Measured at 1.0MHz and applied reverse voltage of 4.0V DC. A RATINGS AND CHARACTERISTIC CURVES KBPC25005/W THRU KBPC2510/W I F , INST ANT ANEOUS FOR WARD CURRENT Mounted on a 220 x 220 x 50mm AL plate heatsink (A) FOR WARD CURRENT I F , AVERAGE (A) 40 30 20 10 Resistive or Inductive load 0 0 25 50 75 100 125 100 10 1.0 0.1 T j = 25 C 0.01 0 150 CURRENT (A) 300 I R , INST ANT ANEOUS REVERSE (A ) CURRENT I FSM , PEAK FOR WARD. SURGE Single Half-Sine Wave (JEDEC Method) 200 100 T j = 150 C 0 1 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 V F , INST ANT ANEOUS FOR WARD VOL TAGE (V) Fi g. 2 Typical Forward Characteristics (per element ) T C , CASE TEMPERA TURE ( C ) Fi g. 1 Forward. Current Deratin g Curve. 400 Pulse Width = 300 s 100 NUMBER OF CYCLES AT 60 Hz Fi g. 3 Maximum Non-Repetitive Sur ge Current 10 T j = 100 C 1.0 T j = 25 C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RA TED PEAK REVERSE VOL TAGE (%) Fi g. 4 Typical Reverse Characteristics (per element)